Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you need serious muscle under load, this jack brings it. With a 7,000-lb lift capacity and 8,000-lb support rating, it handles heavy trailers and equipment with ease. The 15-1/4" lift range gives plenty of adjustment for leveling or axle maintenance. The topwind handle with a red claw grip keeps turning smooth and comfortable, even under weight. It’s built to work hard and stay reliable day after day.
This jack doesn’t just lift—it’s designed to live on your trailer. The weld-on pipe mount and tubular swivel design let you pivot it up for travel and drop it down when it’s time to work. A pull pin with attached lanyard keeps it locked in place and makes sure you never misplace the pin. Whether you’re adjusting for uneven ground or moving between job sites, the swivel action makes setup quick and clean.
Rain, mud, and road grime won’t slow this thing down. The outer tube has a tough black powder-coat finish, while the inner tube and footplate are zinc-plated to protect against rust. The welded-on 8" x 6" footplate spreads the load to prevent sinking into soft ground and keeps the jack steady when you’re cranking or supporting weight. It’s made for long days outside and constant use without showing wear.
No extra gadgets, no hassle—just a smooth, effective lift every time. The 9-3/4" handle radius gives good leverage for easier cranking, and the round tube design keeps the motion steady through the full 15-1/4" lift. With a 16" retracted height and 31-1/4" extended height, it’s got all the reach you need to level, lift, or support in one reliable package. Once welded on, it’s always ready to go when you are.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at a round pipe mount swivel jack with the included foot plate. This utility jack is going to let you raise and lower your trailer. It's going to have a lift capacity of 7000 pounds and a support capacity of 8000 pounds. It's going to feature the tubular swivel design. This is going to let you swing the jack up along the trailer frame for storage, or you can bring it back down when you're ready to use it. It's going to come with your pull pin. This is going to hold the jack in either position, so that is included.
It is connected to the jack with a chain lanyard that way you don't have to worry about misplacing that or losing it. It's also going to come with the weld on pipe mount. This is a raw steel so it's ready to be welded on to the trailer frame. This gets welded on, then this piece connected to the jack, slides right in there, and then it can rotate inside that pipe mount. It allows it to move up into a stowed position or down into a usable position. The four holes that go around the pipe mount will line up with the four holes on the jack.
That way you can swing it whether it's towards the front or towards the rear of the trailer, and it's easy to move it to the stowed or usable position. It's a really nice design, very easy to use. The jack's also going to feature the top line handle. This is going to give us a handle radius measuring from the center of where it mounts to the outer edge of the hand grip of about 9 3/4 inches. It's got the claw grip on it, allows for an easy grip design when you're raising and lowering; just allows for nice easy cranking. You can see here that the jack has a really nice fluid design to it.
I don't feel any kinking or binding. Seems like it has a nice smooth operation. The handle can be flipped over or rotated over, to stowed position when it's not being used. Just like that. Very quick and easy to do. The jack is going to be made from a steel construction.
The outer tube is going to feature a black powder coat finish to resist rust and corrosion. The inner tube and the foot plate are going to feature a clear zinc finished which is going to be resistant toward rust and corrosion as well. The foot plate is going to be welded to the bottom of the inner tube. That's going to give us a measurement of about 8 inches by about 6 inches so the nice large design is going to do a great job at spreading out the applied weight even on softer ground to prevent sinking. It's also going to do a great job at increasing overall stability. The bracket height, measuring from the bottom of the foot plate to the center of the weld on bracket, fully retracted so that the jack is low as it will go, that's going to measure about 16 inches. With it fully extended that measurement increased to 31 1/4 inches which is going to give this jack a travel or lift of about 15 1/4 inches. The outer tube is going to give us a diameter of 2 1/4 inches and the inner tube is going to measure 2 inches in diameter. That's going to do it for today's look at the round pipe mount swivel jack with the included foot plate. Again, this is going to have a lift capacity of 7000 pounds and a support capacity of 8000 pounds.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
Fit perfect no complaints
Fast and good service thanks
Easy ordering and product arrives within a couple days.
Great service and product
Dennis
7/13/2023
Its great! Best jacks Ive ever had!
Arrived just in time and used within hours. Perfect addition to my trailer.
Fast shipping, great service, great pro duct.
worked fie=ne for my 14' box trailer
This was great purchase for a zero turn mower. It fits the connector at the right height and lifts it up without a problem. Lifts mower up with plenty of room to work under deck.
I've had this Jack for 1 year now. It is used constantly. Quality is excellent service was excellent I would definitely buy this again. I have a towing company and it's on one of my trailers so it gets a commercial five stars.
Perfect, Thank you.....
Excellent item and great transaction! Thanks A++++++++++++++++
The 8000 pound hold weight and 7000 pound lift weight is perfect for my 3500 pound dual axel 16 foot flat bed trailer.
I have one on each side of the trailer behind the dual axles to completely elevate the axles off the ground for maintenance.
Needed a jack that extended longer than the one that came on the equipment we bought. This one worked out perfect. Fast delivery also
Excellent customer service and a much better product than my previous stabilizer jack. Has a grease fitting to lubricate the jack and is quite large.
Great as always the help of super the knowledge was super and the time for the delivery was just right on. Thanks again e trailer
I purchased 4 of these jacks to install on 4 corners of my car trailer. The 2 located at the rear serve to stabilize the rear of trailer when loading & unloading. All 4 combined can be used to jack the trailer up even when loaded to change a flat tire or do axle, brake maintenance without needing to wrangle a 100#+ floor jack around
Do you have a question about this Trailer Jack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David
10/11/2023
Still working as good as new