etrailer.com Rubber Hitch Cover for 1-1/4" Trailer Hitches - Qty 1

Ask the Experts about this etrailer Hitch Covers

Do you have a question about this Hitch Cover?

• Parts Needed to Install the EcoHitch Part # 306-X7267 on a 2018 Subaru Outback Wagon
  
• The only thing you will need to install the EcoHitch Hidden Trailer Hitch Receiver part # 306-X7267 on your 2018 Subaru Outback Wagon is basic tools like sockets and wrenches. The rest of the parts needed for installation like the hardware, is included with the hitch. I do however recommend using the hitch cover part # 22281 while the hitch is not being used as this will prevent rust from forming inside the receiver tube opening.
  view full answer...


• How to Install the Curt Trailer Hitch Receiver on a 2013 BMW 128i
  
• The only hitch receiver we have confirmed to fit your 2013 BMW 128i is the Curt Trailer Hitch Receiver part # C11184. Unfortunately, we have not had a chance to install this hitch on a 2013 BMW 128i yet. However, the installation process is fairly straightforward and I will do my best to walk you through the process below. Before you get started you will need a few tools for installation: 8, 10, and 19mm sockets, 12" extensions, Ratchet, 19mm wrench, Flat Head Screwdriver, Rotary Tool...
  view full answer...


• Can I Remove My Spare Tire With Hitch Receiver Installed
  
• The crossbar on both the Draw-Tite Sportframe Trailer Hitch Receiver part # 24852 and the Curt Trailer Hitch Receiver part # C11002 are bowed outward towards the rear of your 2013 Honda Accord Crosstour to allow for removal of the spare tire while installed. This is further explained at the :20 second mark in the attached video. When using the Curt Trailer Hitch Receiver, you will also need to use the required Curt Trailer Hitch Support Strap part # 18050 to secure all non-towing accessories....
  view full answer...


• Availability of a Hitch cover for a 2016 Cadillac SRX
  
• We carry a large selection of hitch covers that will fit your 2016 Cadillac SRX's hitch. Our covers can fit 1-1/4, 2, and 2-1/2 inch trailer hitch receiver openings. Just measure the you trailer hitch opening to find the correct fit. I have attached a link that will display every hitch cover that we carry on our site. We carry everything from a standard rubber hitch covers like # 22282 for 2 inch hitches and # 22281 for 1-1/4 inch hitches to novelty and branded covers. Now, if you...
  view full answer...


• Recommended Trailer Hitch Receiver for a 2017 Toyota Prius Prime
  
• The Draw-Tite Sportframe Trailer Hitch Receiver part # 24966 is a confirmed fit for your 2017 Toyota Prius Prime and will work well for you. The Draw-Tite Sportframe is a Class I hitch with a 1-1/4" receiver tube opening. In order to keep dirt and debris from getting inside the receiver tube opening, I recommend using the Rubber Hitch Cover part # 22281 while not in use. If you can tell me what you will be using the trailer hitch for I would be glad to offer some additional recommendations...
  view full answer...


• What is the Diameter of the Crosstube on the Draw-Tite Hitch for a 2018 Dodge Journey
  
• The inner diameter of the crosstube on the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76225 is 1-1/2". Therefore, a trailer hitch cover designed for a 2" receiver tube opening like the Rubber Hitch Cover part # 22282 will not work for this application. With that being said I am certain you could find something to work for this application with just a bit of modifications. I have attached a sample install video for you as well.
  view full answer...


• Trailer Hitch and Bike Rack Compatibility for 2017 Mazda 6
  
• All of the items you have listed for your 2017 Mazda 6 are compatible, the Draw-Tite # 24908 hitch, the Swagman XTC-2 2-Bike Platform Rack # S64670 and the Rubber Hitch Cover # 22281. The only other thing I recommend is protecting your investments with the Locking Anti-Rattle, Threaded Hitch Pin for Swagman Hitch Racks # S64029 which will lock the rack to your hitch. If you wanted to secure your bikes as well I recommend the Anti-Rattle Hitch Lock and Cable for Swagman Bike Racks...
  view full answer...


• Recommended Trailer Hitch Receiver for a 1999-2004 Audi A6 Avant Wagon
  
• The Curt Trailer Hitch Receiver with Standard Drawbar part # C11166 will fit an Audi A6 Avant Wagon from 1999-2004. As long as your Audi is within this year range then yes this hitch will work well for you. If you have a different year Audi A6 then please let me know what year that is and I would be glad to see if we have other options available for you. Please note that in order to abide by Curt's warranty, the use of a stabilizer strap such as the Curt Trailer Hitch Support Strap part...
  view full answer...


• Recommended Trailer Hitch Receiver for a 2011 BMW 328i
  
• Unfortunately we do not have a hitch listed as a fit for your 2011 BMW 323i. In general, all of our products are designed for vehicles in the U.S.A. but it is highly unlikely that they are different than the Canadian models but again are not specifically designed.
  view full answer...


• Should a Locking Hitch Pin be Purchased to Help Keep a Hitch Cover from Being Stolen
  
• A trailer hitch cover like the Rubber Hitch Cover # 22281 is not one that can be locked, but since it is a common piece it really isn't in too much danger of being stolen. However, if you you are looking at a hitch cover that is a little more unique, like the part # HTCC11805, then I do recommend going with a locking hitch pin like part # e98880 as opposed to a typical pin and clip like part # PC3. This will help to deter theft of your cover. Please note that the lock and clip/pin...
  view full answer...


• Why is a Support Strap Required for Class I and II Curt Trailer Hitch Receivers
  
• You are correct that the Curt Trailer Hitch Receiver part # C11185 for your 2000 Chrysler Sebring will require the use of a stabilizer strap like the Curt Trailer Hitch Support Strap part # 18050 for all non-towing application. In fact, all Class I and Class II trailer hitch receivers made by Curt require the use of this strap in accordance with their warranty policy. It is not so much as the hitch is made poorly as it is just being a precautionary device that reduces movement of hitch...
  view full answer...


• Recommendation for Installing 2 Inch Hitch Cover on 1-1/4 Inch Hitch Receiver
  
• I recommend first verifying the receiver size on your vehicle, as a 1-1/2 inch hitch is very uncommon. We do not have any adapters available for this sized hitch receiver. If you actually have a 1-1/4 inch hitch receiver, you will just need to use an adapter like the Brophy # HTAD. This adapter will slide into your existing hitch receiver and provide a 2 inch receiver opening that you can use with your cover. We do also have a large selection of hitch covers that fit directly with...
  view full answer...


• Parts Needed for Towing a Small Trailer with a 2011 Toyota Camry LE
  
• I will be glad to help you make sure that you picked everything out correctly. The Curt Trailer Hitch Receiver # C12343 is a great option for your 2011 Toyota Camry LE and is compatible with the Curt Class II Drawbar # C45521 that you chose. The Curt 2" Hitch Ball # A-82 has the same shank diameter as what the ball mount does so they will work well together. The only thing missing is a hitch pin and clip like part # F-4 unless you wanted a locking hitch pin like part # 5200 instead. You...
  view full answer...


• Recommended Rubber Hitch Cover For 1-1/4 Inch Receiver
  
• We do not modify the Hitch Reducer # HTAD. Cutting the adapter will void the warranty. We do offer a rubber hitch cover # 22281. This will fit in the 1-1/4 inch trailer hitch receiver and helps protect the end of the receiver by keeping dirt and debris out of the hitch.
  view full answer...


• Recommended Trailer Hitch Receiver And Cargo Carrier For 2016 Ford Focus
  
• For your 2016 Ford Focus, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver Class I - 1-1/4" # 24872. This trailer hitch receiver is rated for a 200 lb tongue weight and a 2000 lb towing weight. This is a very well made hitch that will allow you to carry a bike rack or cargo carrier. Your owners manual does not give weight restrictions and states you are never to tow with this vehicle, so you will be limited to accessories. The 17x46 Curt Cargo Carrier for 1-1/4" and 2"...
  view full answer...


• Does the Curt Vertical Trailer Hitch Receiver Have a Shank That is Permanently Installed
  
• The Curt Vertical Trailer Hitch Receiver, part # C11748V, that you referenced for your 2001 BMW Z3 uses that special shank in the receiver opening that is facing the ground after installation. The shank is removable, it is secured by the standard pin and clip. Keep in mind that this is a Class I 1-1/4 inch trailer hitch receiver that has a max Gross Trailer Weight (GTW) of 1,500 lbs and a max Tongue Weight (TW) of 150 lbs. To help keep the inside of the Curt receiver nice when the...
  view full answer...


• Can Lubricant be Used to Help With Installing Bike Rack Into Hitch Receiver
  
• If you are having trouble installing your hitch mounted bike rack into a trailer hitch receiver, like the Draw-Tite # 24808 for your 2009 Toyota Prius, then I'd first recommend making sure that the receiver is cleaned out and free of debris. If it is clean then there may just be some extra powder coating on the inside. We have had customers who tried filing it out but you can definitely try some WD40 first if you have some handy.
  view full answer...


• Hitch Covers Compatible With 1-1/4 Inch Trailer Hitch Receiver
  
• It sounds like you have a 1-1/4 inch trailer hitch receiver opening with a lip on the outside. The 2x2 inch cover is designed for a bigger hitch. For a 1-1/4 inch cover, you can use the etrailer.com Rubber Hitch Cover for 1-1/4" Trailer Hitches - Qty 1 # 22281 to keep out dirt and grime. There are many other options of hitch covers with different looks and features. I've attached a page to your options, you will just want to make sure you select a 1-1/4 inch hitch cover.
  view full answer...


• Will the Curt Class I Trailer Hitch # C11367 Fit my 2015 BMW 2 Series 228i Coupe
  
• Yes, the Curt Hitch Receiver # C11367 will fit your 2015 BMW 2 Series. If you are going to be using a bike rack, like the Thule Roadway # TH912XTR, keep in mind that your max Tongue Weight is 200 lbs and that you will be limited to carrying only 2 bikes. If you will be using the hitch for anything but towing, Curt recommends using the Support Strap # 18050, otherwise your warranty from Curt will be voided. You might also be interested in the Rubber Hitch Cover # 22281 which inserts into...
  view full answer...


• Availability of Hitch Cover for 1-1/4 Inch Trailer Hitch Receiver
  
• It sounds like you are looking for a hitch cover for your 1-1/4 inch hitch receiver. We do have a large selection of covers that are designed specifically for this hitch size. I have attached a link that will take you to this selection so you can look through all the different options. For example, the etrailer.com Rubber Hitch Cover # 22281 is a nice, black rubber cover that will work perfectly for your hitch receiver.
  view full answer...


• Recommended Hitch Cover for Curt Class I Trailer Hitch on 2015 Acura TLX
  
• For a rubber hitch cover that will work perfectly with the Class I Curt trailer hitch installed on your 2015 Acura TLX, I recommend the Curt # C22271 or the etrailer.com # 22281. Either option will push right into the hitch receiver to protect it from dirt and debris when you aren't using it for towing. I have attached a couple short video demonstrations on these covers that you can also check out.
  view full answer...


• Hitch Cover For 1-1/4 Inch Class I Reese Hitch On 1996 Plymouth Neon
  
• For your hitch cover on your 1996 Plymouth Neon, I recommend the etrailer.com Rubber Hitch Cover for 1-1/4" Trailer Hitches - Qty 1 # 22281. There is also the Rubber Tube Cover 1-1/4" # 2211.
  view full answer...

Do you have a question about this Hitch Cover?