Will Magnum Headache Rack Fit with Pace Edwards SwitchBlade

Question

Question:

Can you use this retractable Bed Cover with a magnum headache rack?

asked by: Jeff

0

Headache Rack
(click to enlarge)

Expert Reply:

Hey Jeff, yes the Pace Edward Switchblade tonneau cover part # PE66QJ that you referenced will definitely work with your Magnum headache rack. Your headache rack attaches to the top of your bed rails and this tonneau cover installs between the bed rails so they will not interfere with each other? Do you carry anything the rack or do you just like the way it looks?

expert reply by: Jameson C

0

Pace Tonneau
(click to enlarge)

Answer 1

Hey Ben, welcome back. Yes, something like that does exist. I'm thinking an automotive paint protection film would do the trick for that. We don't carry anything like that here, but you can definitely find it elsewhere online. You can buy a…

view full answer...

Answer 2

I have tonneau covers that are compatible with the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack - Aluminum - 500 lbs - 68" Crossbars, part #Y01151-58. These tonneau covers will all have t-slots. You will need the Tonneau Cover Adapter Kit…

view full answer...

Answer 3

We do carry tonneau covers similar to the Pace Edwards Switchblade Retractable Hard Tonneau Cover #311-SWD7936 for your 2017 Ram 3500 with an 8 foot bed that can be locked at different spots, but the Switchblade is not a lockable tonneau cover.…

view full answer...

Answer 4

There is a B&W Companion that will work for your 2017 Ford F-350, though the #BWRVK3300 is a fixed hitch and you will need the sliding version in order to avoid damage to your F-350's cab when making sharp turns since you have a 6-3/4'…

view full answer...

Answer 5

Worst case scenario, I am going to assume that the hitch lock is the only Yakima lock that you have that used that key. If this is the case you will either need to have a locksmith pick the lock or you can try drilling it out. In this case you would…

view full answer...

Answer 6

You can definitely get the Yakima HitchLock for Yakima Hitch Mounted Bike Racks - Same Key System (SKS) #Y07235 keyed the same as your Yakima OnRamp Bike Rack for 2 Electric Bikes - 1-1/4" Hitches - Frame Mount #Y96FR. To do this you will need…

view full answer...

Answer 7

All Yakima Skyboxes 2009 to current, like #Y95AV, feature SuperLatch security latches on both sides, so if one of your lock cores fell out, and you lost one of the lock cylinder housing components, the only solution is to replace the SuperLatch…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Will Magnum Headache Rack Fit with Pace Edwards SwitchBlade

Product Page this Question was Asked From

Continue Researching