This hitch cover with a rotary-engraved, black Chevrolet bow-tie logo is perfect for any Chevrolet enthusiast. The chrome-plated solid brass faceplate is paired with a rust-resistant stainless steel base. Locking bolt and foam gaskets included.
Features:
Specs:
Hitch covers are fun to show off and they look cool, but they do more than just accessorize your vehicle. This officially licensed Chevrolet logo hitch cover helps to keep dirt out of your receiver and deters rust, so you can easily install ball mounts and other hitch accessories when you need them. This hitch cover is a great way to protect your receiver and express yourself, all in one.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Chevrolet Bowtie Logo Trailer Hitch Receiver Cover for 2 inch hitches. Hitch covers are a fun way to show off your passion and they look really nice. It's going to help add a clean finished look to your hitch and it's going to keep dirt and grime out of the receiver tube of your hitch which is going to help prevent rust and corrosion. This is an officially licensed product. It's going to feature the rotary engraved Chevrolet bowtie emblem with a durable UV resistant black epoxy fill. That's a chrome plated solid brass faceplate that adds a lot style to the vehicle, strong durable design.
It's also going to have a stainless steel base that's going to do a great job at resisting rust and corrosion. Now the unit does come with three foam gaskets. These are designed to help eliminate rattle between the hitch cover and the hitch so you can use one, two, or you can use all three or switch up the combination of each one. Just whatever more works best for your application, but you can use just one, just two, or all three. Again, those are designed to help reduce and eliminate that rattle between the hitch cover and the receiver tube opening of the hitch. It's also going to come with a locking stainless steel bolt that secures the hitch cover to the receiver tube of the hitch.
It's going to come with the included tools to get that taken care of. The unit has two pinhole locations so you can choose whatever one works best for your application. Again, this is deigned for a 2 inch by 2 inch trailer hitch receiver. The faceplate's going to give us a measurement going this direction of about 6 inches. Going this direction it's going to measure about 3 and 1/4. The base length, overall length is about 3 and 1/2 inches.
From the back of the faceplate to the center of that first pinhole we're looking at about 1 and 7/8 to 1 and 15/16 of an inch. Then to the center of that rearmost pinhole it's just another inch, so 2 and 7/8 to 2 and 15/16 of an inch. It's a really simple installation. I'm going to show you how it installs. What you can do is you can add on these foam gaskets. Just slide them over.
We're going to go ahead and put all three of them on for our application. You take it and you simply slide it into the receiver tube of your hitch, push it in until the pinholes line up. Take that locking bolt set, place it through, thread the two pieces together, and then you use the included tools to finish that tightening process. That's all there is to it. You'll see how that foam gasket design takes up that slack in there so that does help reduce rattle, wiggle, and wobble, which is going to take out that noise. That's going to do it for today's look at the Chevrolet Bowtie Logo Trailer Hitch Receiver Cover for 2 inch hitches.
Average Customer Rating: 4.9 out of 5 stars (258 Customer Reviews)
This hitch cover with a rotary-engraved, black Chevrolet bow-tie logo is perfect for any Chevrolet enthusiast. The chrome-plated solid brass faceplate is paired with a rust-resistant stainless steel base. Locking bolt and foam gaskets included.
I had this for over a year and I will say without hesitation,it looks as good as the first day I installed it!!! Very high quality, I still get compliments on it.
Ron A - 11/07/2021Looks great.
Heavy Duty ( high quality).
It arrived today. It’s already on my 1964 Chevy C-10.
I am so happy to receive this gift for my husband for Christmas. It is well made and came well package with foam for protection. High quality. I couldn't be more happy with is product and would give it more stars. I would recommend etrailer to friends and family for product needs. Thank you etrailer for your wonderful assistant and questions I had.
Bought this trailer hitch cover for my Chevy pick up. I previously bought one for a Chevy Colorado I owned. Both covers are very nice high-quality items. One can definitely see that after handling them and feeling their weight, and seeing the materials they are made with. I have no doubt the new cover I bought for the p/u hitch I have now will last for a very long time.
Very sharp product....what I did not notice, or was not mentioned, was that included in this product is a pin to actually be able to lock the receiver, using special wrenches also provided.
Laura E - 11/14/2017Item was delivered when promised in good condition. The product looks like it is well made
Another great product purchased etrailer! I purchased the hitchcocver as a Father's Day gift for my father for his 2017 Silverado and it looked so nice, added just enough shine. Would recommed the product and this company anytime!
This hitch cover is exactly what we wanted. It looks awesome on our truck and gives the hitch a finished look when we are not using it for towing.
Very reasonably priced and received in excellent condition.
The product was exactly as advertised. The quality was excellent. The shipping and follow up were excellent. Will buy again from this vendor!
Very awesome Product and packaging forsure a Future buyer does not Disappoint you're really getting you're money's worth Guarantee !!!!!!!!!!!
Great, well made product!! Very satisfi ed!!
Review from a similar OEM in Hitch Covers
This is a recap of my first experience with etrailer.com and an order for the customized MKX Hitch-Cover. Please read through to the end; it's all good.
I placed my order and saw several shipping options with various price-points. Without any explanation of how long each would take or improve transit times, I picked Priority Mail.
Shortly, I received an email confirmation that it would "ship" in about seven days. Hmmm? I replied that I needed it DELIVERED in about seven days.
Within minutes, I get a response that it would be to their warehouse in two days and would be sent UPS Ground with assurance that would get it to me in two days. Michelle even credited back the difference between Priority and Ground. Nice.
True to her promise, the unit delivered in four days. Yea!
Not so fast, it didn't fit into my 2" hitch receiver. The insert was 1/8" too wide.
I sent photos of the unit sitting on a ruler to show the problem. Now, I was down to two days before my trip.
Michelle had her team pull units off the shelf and measure them. All were within spec, thankfully. A replacement unit was sent and arrived in the nick-of-time. She also provided a prepaid return label.
I love the look of my MKX Hitch-Cover! I loved the service and their commitment to me, a first-time customer. Wow!
Larry T - 11/03/2018Review from a similar OEM in Hitch Covers
I have a set of Rock Tamer mud flaps that attach to my Class V hitch using a reducer. This adds about an inch of overall distance to the pin. No one that I know of makes a hitch cover that fits a Class IV or V hitch, and no one makes one with a shank that is long enough to work with my setup. I researched all of the brands that etrailer sells, and found this LFI brand had some possibilities. With the shank being attached to the plate with screws, I should be able to make a spacer and make this work. I cut a 1" piece of a 2" square tube that I salvaged from a piece of an old 5th wheel landing gear, and added it to the shank. I drilled a new hole in the shank and now have a hitch cover that I can use with or without my mud flaps. It would be great if I could get a longer shank from etrailer or from LFI preferably with no holes so I could custom drill my own, or with pre-drilled holes to my specification. Short of that, my solution works very well for my needs. Once again, etrailer came through, it just took a couple of hours of extra work. I am very happy with my final product. One other comment on the Class IV and Class V hitch. I like the "locking" pin that was included with this cover, however it is too short to work with the Class IV or V hitch. I wish they would supply a pin that is long enough to work with the hitch this particular cover would ultimately be used on.
Review from a similar OEM in Hitch Covers
I have a 2020 Chevy Silverado LTZ silver ice metallic. With advanced trailering package a Chevy bow tie light messes all the sensors in the rear of the truck. Anyways I looked for something else I found this Chevy Silverado hitch cover from you people. It is the best hitch cover I have ever seen, it is beautiful looks great on my truck or any Chevy I am very fussy it is better than anything I could buy in any automotive store I will buy more for my other chevys. PS. Make sure you lock it on receiver so no one will take that is how beautiful it is here is a picture of it
Review from a similar OEM in Hitch Covers
Hitch cover came in Ford OEM packaging stating that it was for a 2" hitch. However, original order was for an 1-1/4". Contacted eTrailer.com customer support. They checked the part number, and told me to open package. The cover was, indeed, for an 1-1/4" hitch.
Did have an issue with securing the locking pin to the hitch. Had to remove 1-3/8" material from one of the locking wrench keys (These 2 keys have a specially cut triangular bit). This allowed me to secure the locking pin/cover.
eTrailer Customer Service is the best. They are very courteous, as well as, knowledgeable and helpful. The product is 1st Class Ford OEM, and am very happy with the purchase. Would definitely purchase from them again, and recommend them to a friend.
Ron P - 01/05/2017Review from a similar OEM in Hitch Covers
Great looking receiver cover. Fast ship ping.
Review from a similar OEM in Hitch Covers
The quality and finish are excellent as is the fit. I will definitely order from etrailer again with confidence.
Thank you for your follow on delivery and a great product.
Review from a similar OEM in Hitch Covers
Ordered my first Ranger hitch cover and excited about putting it on...Thanks for such great service.
Review from a similar OEM in Hitch Covers
I love my trailer hitch, however; I was involved in a rear end collision that almost bent the hitch into. I’m glad the hitch cover was on as it and the hitch sustained mist of the rear end damage to my SUV. That hitch cover was a strong one! I’ve ordered another one and I’m sure it will be just as good as this one, but I hope I don’t have another wreck to prove that point.
Review from a similar OEM in Hitch Covers
Bought this hitch cover my 2020 Ford Explorer and it looks great, product is also rust proof so it should look great for many years. have included a photo of hitch cover, however because it is chrome plated it shows a lot of reflections.
Review from a similar OEM in Hitch Covers
Solid, good looking chrome hitch plate. Installs quickly with a heavy bolt and rubber gasket. It was rapidly shipped, highly recommended vendor and product.
Review from a similar OEM in Hitch Covers
Very well made. The problem is all F450 have a 3in Hitch the stainless Steel Bolt that you send with the receiver is not long enough to work some one needs to review the problem. Thanks
Review from a similar OEM in Hitch Covers
Only thing i thought you can do on your website was when ordering something put how long it will take to make it or to say not in stock but it take this long make and to get delivered to you but hitch was very nice looking can't complain about that so on that i gave excellent and it came packaged real nice and safe thanks for what your company did and i would order from you guy's again
Review from a similar OEM in Hitch Covers
I have been looking high and low for a new trailer hitch cover for my MKX. The original cover was plastic and broke about a year ago. The one I ordered is a good metal material and should last a long time. Placing the order was easy, and it arrived right on-time! Great job.
Review from a similar OEM in Hitch Covers
The cover is beautifully made and was easy to attach to hitch. The car looks complete! I was impressed at how well the cover was packaged for shipping- no chance for dings or scratches. Will definitely share this site with friends and neighbors. A satisfied customer.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.