bing tracking image
  1. Hitch Covers
  2. Draw-Tite
  3. Misc Covers
  4. Plain
  5. Fits 1-1/4 Inch Hitch
  6. Rubber
Rubber Tube Cover 1-1/4"

Rubber Tube Cover 1-1/4"

Item # 2211
lowest price pledge
Retail:$15.54
Our Price: $4.90
You Save: 68%
Hitch Covers
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.07 lbs
Quantity: 
In Stock
Draw-Tite Hitch Covers - 2211
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Economical and easy to use with your DrawTite hitch receiver. This basic hitch cover keeps dirt and debris out of your receiver and does not need a pin to hold it in place. Call 800-298-1624 to order Draw-Tite hitch covers part number 2211 or order online at etrailer.com. Free expert support on all Draw-Tite products. Guaranteed Lowest Price and Fastest Shipping for Rubber Tube Cover 1-1/4". Hitch Covers reviews from real customers.
  • All Info
  • Reviews (284)
  • Q & A (0)
  • Videos (2)
  • Photos
  • Why etrailer?

Draw-Tite Hitch Covers - 2211

  • Misc Covers
  • Plain
  • Fits 1-1/4 Inch Hitch
  • Rubber
  • Standard
  • Draw-Tite
  • Square

Economical and easy to use with your DrawTite hitch receiver. This basic hitch cover keeps dirt and debris out of your receiver and does not need a pin to hold it in place.


Trailer Hitch Receiver Cover for 1-1/4" Trailer Hitches

Product detail

Hitch cover does not require a pin or clip to hold in place.




2211 Rubber Tube Cover 1-1/4"




California residents: click here


Video of Rubber Tube Cover 1-1/4"

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Draw-Tite Logo Rubber Hitch Cover Review

Hi there, haulers. Today we're going to be taking a look at Draw-Tite's Rubber Hitch Cover. They're available for either two inch hitches or for one and a quarter inch hitches. This Draw-Tite Hitch Cover is a press to fit. So there's no pin or anything needed to hold it in place. It just pushes in and it stays in there.

And when you're ready to take it out, just give it a nice tug and it'll pull right out of there. You can see the raised sections around the outside, where it presses it tight, holding it in.The main purpose of our Draw-Tite Cover here is to keep dirt and debris from getting inside of our hitch receiver when we're not using it. As dirt and debris builds up inside the hitch receiver, it can be difficult to slide in and out your accessories, and it could get bad enough to a point where you can't get the accessory in until you clean all that dirt and debris out.Keeping a cover in there is going to prevent you from having to do this because it's not going to be able to build up on the inside edges, just here around the outside, and we can just hit that with a hose, no big deal. And plus it's on the outside, so it's not going to affect the operation of sliding anything into the receiver.It's also going to give you a nice appearance on the back of your hitch, displaying the Draw-Tite logo and completely hiding the opening on your receiver. And once you get your hitch installed, you can enjoy its appearance and be sure that you'll be able to enjoy its functionality with ease of use for a long time to come.Now we do have various other hitch covers here at etrailer.com with different logos on them.

So you can pick one that's going to best suit your needs, but Draw-Tite also has a another product available, which is only for the two inch hitches, but it is a hitch silencer and hitch cover in one. I would recommend that one, if you do have a two inch hitch and you've got the clearance to use it because it acts as an anti-rattle device, in addition to being a hitch cover.The only reason why that you wouldn't want to use that one over this one is if you don't have proper clearances around your receiver, as this one slides right inside your receiver end to hold it in place. The silencer will go around your hitch receiver, so you need a little bit of extra space around the outside. And what's cool about that one is it has a door that flips open that covers up your receiver, but it also has a locking lever on the side. So once you put whatever you have now, you hit the locking lever down and it shifts the whole assembly over a little bit, pressing it tight against the receiver, eliminating any rattle noises.

And that completes our look at Draw-Tite's Rubber Hitch Cover.


Customer Reviews

Rubber Tube Cover 1-1/4" - 2211

Average Customer Rating:  4.9 out of 5 stars   (284 Customer Reviews)

Economical and easy to use with your DrawTite hitch receiver. This basic hitch cover keeps dirt and debris out of your receiver and does not need a pin to hold it in place.

- 2211
by:

Just placed a 1 1/4 “ trailer hitch cover It seems to fit really snugly so very happy about that! I drive a 2020 Acura RDX and our hitch is mainly for our bike rack as we’re into cycling. I like having the tube protected from road debris, splash etc that can cause dirt and rust making inserting our bike rack difficult. We lost our original rubber covers twice already either from a car wash or theft. This new one seems to really fit in well and seems secure. We’ll see! Wish there was another option but a similar cover with a fail safe rubber loop was not available to n the 1 1/4 only available in the 2” hitch .



- 2211
by:

This is our second hitch from etrailer! The whole experience has been great from ordering, fast shipping, great price and the product is high quality. Also giving detailed installation instructions is awesome.


Comments
Absolutely perfect! No complaints at all.
Rich C - 04/11/2020


- 2211
by:

Fits perfectly in the Curt 1-1/4" receiver that I used to fabricate the hitch for my 1990 Dodge van. Rubber dimples on all four faces help it fit snugly, while not making it too tight. Matte finish is also nice. Recommended.



- 2211
by:

Fast delivery, superb product quality... nice tight fit in the hitch opening.



- 2211
by:

Hard to find a 1.25" receiver "plug" - I chose this because it's flexible RUBBER - not hard plastic - and the inner core of this is longer than others available - once you stick it in the receiver hole - it stays. I happened to buy a Draw tite hitch - and like the symmetry of the logos as a bonus - but will work nicely in any 1.25" receiver. As always - promptly sent out by etrailer with great communication.



- 2211
by:

I have a 1 1/4 hitch from "Hidden Hitch" and had a rubber hitch cover that was either stolen or got pulled out somehow; at any rate it was lost. This one is an excellent replacement; actually this one is more secure than the one I got with my 1 1/4 hitch. When you put this hitch protector into the open hitch it goes in further and is VERY securely in place. I bought a couple to be safe; but I highly recommend these!



- 2211
by:

The product is great, packing was a little to be desired though.



- 2211
by:

Does what I need it too!


Comments
After a year of use, The hitch has worked excellent. The only issue not a flaw in the hitch is it scrapes at the base of my driveway if I back in or have any weight in the rear of the car. Also I cannot install a bike rack in the hitch while in the driveway so I just put rack & bike on in the road. I would be again!
Joe M - 11/21/2021


- 2211
by:

Always a pleasure to do business with e trailer. Products as described deliver on time



- 2211
by:

Fits well looks clean


Comments
Works great With the receiver out you cannot tell it’s even there. car tows well Prius power!
Tomas - 11/05/2020


- 2211
by:

This install was much easier then I expected. The etrailer online step by step video gave me the confidence to install the hitch and wiring without any problems. I installed it last weekend and took my boat the the lake the following weekend. Quality of the products was great! I did go to the BMW dealership and bought the color matched plastic rivets for the wheel well trim. I suggest you get six. My wheel well trim piece is white. etrailer provides black rivets.



- 2211
by:

Etrailer is the place to get it right the first time. Needed 1 &1/4 inch receiver cover, looked all over it was right here on etrailer.com


Comments
I use it every day
Michael C - 04/13/2018



- 2211
by:

Here is my setup using the items from my two orders, including the two ant-rattle devices (not mentioned in captions). The pictures aren't that great of quality, since I just used my cell phone (my only camera anymore). Everything works perfectly.



- 2211
by:

The cover fits snug in the receiver.



- 2211
by:

How do you write a review about a little rubber plug? Well, here is how I did it.... I tried the etrailer plug, the Curt plug and the Drawtite. All three were similar priced. Of the three, this cover definitely holds the best. This is a big deal when you travel rough country roads. The cover keeps out dust and gravel and it gives the vehicle a cleaner appearance. Nobody wants to see your rusty, old hitch with the wires dangling down! Best rubber hitch plug out there because of it's larger rubber ribs. It stays on.


Comments
Wow, I still have it! It still stays put.
Jeff L - 10/15/2017



- 2211
by:

I really liked the cover.It makes the hitch look nicer.



- 2211
by:

Arrived quickly and as described. Much appreciated. Subaru dealer installed my hitch but was unable to sell a replacement 1.25" plug. Hard to fathom.


Comments
I bought several. Good thing since one was extracted going through an auto car was. Those brushes must have hit it just right.
Van - 11/12/2015

Thanks for your reply Van, but we do recommend removing all hitch covers before entering any carwashes.

-- Etrailer Expert Rachael H - 11/12/2015


- 2211
by:

I am very pleased with the entire process from ordering the part, customer service and thru the on time delivery. I have never ordered from etrailer . com before but you now have a new and returning customer-thank you very much



- 2211
by:

This cover fit our Draw-Tite 1-1/4" hitch perfectly. Fits very snug and looks good. Price is good too.


Comments
Cover still fits snug and looks as good as new.
Deb - 08/19/2017



- 2211
by:

I have purchased four of these during the four years I have had this hitch. Your information on this product says it can go through a car wash without being dislodged. The last two rubber tube plugs were lost in my car dealers car wash. When I have used the local Jet Splash I have not had a problem. I will now remember to remove the plug when my car is at the dealer’s and a car wash is scheduled. I am thankful it was an inexpensive idea to replace.



- 2211
by:

Convenient little sucker. Highly recommend to plug the receiver to keep dirt and water out.



- 2211
by:

Draw-Tite Rubber Tube Cover for 1 1//4" receiver hitch. Order was filled and shipped quickly. Arrived as expected and fit perfectly! Am pleased with the service and product. Would definitely recommend etrailer and this product to others.


Comments
Still working fine! A great Tube Cover!
Lawrence M - 08/05/2017



- 2211
by:

I have purchased items from etrailer several times. Products were always as described with excellent service and shipping. This order was delivered in 1/12 days from the time I ordered it (excellent).



- 2211
by:

Nice cover, fits perfectly!



- 2211
by:

This rubber Tube Cover was purchased so that I would not have to experience driving with my hitch to the mall, and coming back to find it gone. Now I simply take off my hitch drawbar, replace it with my cover and go about my shopping in peace. Of course I purchased two of these in case anyone gets itchy fingers and decides to add it to their collection of stolen trophies. Yes, I could've purchased a lock for my hitch, but I am "old school" frugal. It is what it is! Great job "etrailer".


25
288
Show More Reviews

Ask the Experts about this Draw-Tite Hitch Covers

  • Is The Rubber Hitch Tube Cover # 2211 Included with the Hitch for 2004 Honda Accord
    You will need to purchase a Rubber Tube Cover # 2211 separately from the Draw-Tite Trailer Hitch # 24787. I attached review/installation videos for the # 2211 and the # 24787 for you to check out as well as installation instructions for the # 24787. To complete your towing setup you may be interested in the following products: Draw-Tite Custom Fit Vehicle Wiring # 118441 (installation instructions attached) Hitch Ball # 19256
    view full answer...
  • Is the # 36416 Hitch Picture an Accurate Picture or a Typical Photo for 2010 Toyota Camry SE
    The pictures on our site are of the actual Draw-Tite Trailer Hitch, item # 36416 and the installation video is an actual installation we did on a 2010 Toyota Camry. Our site uses actual pictures for all of the items we carry unless otherwise stated as a typical photo. I went to the Draw-Tite site and saw that they are using a typical photo for this part number but if you pull up the installation instructions (see link) you will see that the drawing for the # 36416 hitch is the same as...
    view full answer...
  • What Size Trailer Hitch Cover is Needed for a 2010 Hyundai Santa Fe
    We have many hitch covers that will work in the Draw-Tite 2 inch Trailer Hitch, item # 75684. I have posted a link to a hitch cover that we carry that is compatible to a 2 inch receiver hitch. If your vehicle has a factory 1-1/4 inch hitch you will need a hitch cover designed for the 1-1/4 inch receiver opening. I have posted a link to one of these covers below also. I have also posted a link to our complete selection of hitch covers for you to review. Just be sure to select one that...
    view full answer...
  • Trailer Hitch, Drawbar, Hitch Ball and Receiver Cover for a 2005 Mazda 3S
    All hitches with a 1-1/4 inch opening are going to take a ball mount that will take a hitch ball with a 3/4 inch shank. You can use the Hitch Ball with 1-7/8 inch Diameter Ball and Short Shank, 2000 lbs GTW, part # 19256, or the Hitch Ball with 2 inch Diameter Ball and Short Shank, 3,500 lbs GTW, part # 19258. The Curt Class I Trailer Hitch Receiver with Draw bar, part # 11386, does not come with a hitch cover. If you wanted a plain black plug, I recommend the Rubber Tube Cover 1-1/4 inch,...
    view full answer...
  • How Do The Hitch Covers Install On A 2007 Ford Explorer SportsTrac With A 1-1/4 Inch Hitch
    Most of the hitch plugs and hitch covers are designed that the plug or the shank on the hitch cover will slide into the inside of the 1-1/4 inch hitch receiver. The lip on the end of the hitch should not interfere with installing the correct 1-1/4 inch size hitch cover on your 2007 Ford Explorer. The rubber hitch plugs, like the Draw-Tite Rubber 1-1/4 Inch Tube Cover, # 2211, will just push into the opening and does not require a pin to hold it in place. The hitch covers that use...
    view full answer...
  • Hitch Cover for the Curt Class I Trailer Hitch # C11006 and Hitch Opening Dimensions
    I went out the warehouse and measured the overall dimensions of the receiver tube on the Curt Class I Trailer Hitch, item # C11006. The outside dimension of the receiver tube measures 1-7/8 inches across and 1-7/8 inches high. You would be able to use any of the rubber hitch covers that we carry. We have several that have manufacturer names on them such as the Draw-Tite Rubber Hitch Cover, item # 2211, the Hidden Hitch rubber Hitch Cover, item # 60037, and the Curt Rubber Hitch Cover, item...
    view full answer...
  • Looking for a 1-1/4 Inch Black Rubber Trailer Hitch Cover for a Toyota Rav 4
    We have three 1-1/4 inch black rubber hitch receiver covers; part # C22271, part # 2211 and part # 60037. I have attached links to each of these products for you to check out. At this time we do not have a rubber 1-1/4 inch hitch cover with a Toyota logo.
    view full answer...
  • Hitch Cover For 1-1/4 Inch Class I Reese Hitch On 1996 Plymouth Neon
    For your hitch cover on your 1996 Plymouth Neon, I recommend the etrailer.com Rubber Hitch Cover for 1-1/4" Trailer Hitches - Qty 1 # 22281. There is also the Rubber Tube Cover 1-1/4" # 2211.
    view full answer...

Do you have a question about this Hitch Cover?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality hitch covers for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate hitch cover information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Laura H
Updated by:
Laura H
Employee Alexander C
Updated by:
Alexander C
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee David F
Installed by:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624