Customers prefer these similar products
Like your GMC, this 3-layer, riveted hitch receiver cover is built to get the job done. The GMC logo is laser cut into the faceplate, which, like the backing plate, is made of brushed stainless steel. The middle layer is a durable red plastic.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review part number AUT-GMC2-S and this is the Automotive Gold Brushed Stainless Steel GMC Trailer Hitch Cover for 2" hitches. Now hitch covers do look cool but they do more than just accessorize your vehicle. This GMC hitch cover here will help keep dirt out of your receiver and prevent rust so that you can easily install your ball mount or other hitch accessories into your receiver when you need them. As you can see, it uses the officially licensed GMC logo. It does have the riveted face plate you can see right here. It gives your vehicle this nice industrial look and the way it's constructed if I turn it to the side you can see, they use a three layer face. The front and the back layers are stainless steel so they won't rust. The very middle is a durable red plastic and, if you notice on the front, they use a laser cut logo to provide well-defined lettering.
They use a nice UV resistant red lettering in there. This is a stainless steel construction so it does resist corrosion. On the back where the shaft is, it goes into the receiver, you can see it's a one piece riveted construction so there's no assembly required. When you do receive it, you'll get it just like this ready to install. If you notice on the side, it has multiple hitch pin holes to accommodate different hitch receivers so you just use your hitch pin and clip or your hitch lock to connect this to your hitch receiver. If you don't have one and you need to purchase them, we do sell them separately on our website and they are listed on this product page as a related product. This part is made in the USA and, again, the application is for 2" by 2" trailer hitch receivers.
Just to give you an idea of the size of this cover, the width on it is going to be right at 4" and the height is going to be right at 3 1/2 ". That should do it for the review on part number AUT-GMC2-S. This is the Automotive Gold Brushed Stainless Steel GMC Trailer Hitch Cover for 2" hitches.
Average Customer Rating: 4.7 out of 5 stars (441 Customer Reviews)
Like your GMC, this 3-layer, riveted hitch receiver cover is built to get the job done. The GMC logo is laser cut into the faceplate, which, like the backing plate, is made of brushed stainless steel. The middle layer is a durable red plastic.
Still looks like new after one year. Love the distinctive look compared to other "plain jane" covers.
Lynn B - 01/13/2022great product, it has a nice clean look and appears to be well made to last for years.
Good quality
Well made hitch cover!
Great product. Gave as Christmas present to my brother. He loved It.
Beautiful product! Made a sweet truck even sweeter!
Review from a similar Stainless Steel in Hitch Covers
I wish I was reminded that the to buy a hitch lock when I order the 2 hitches. Other then that great product. I love the Colorado hitch cover looks great on my truck. Thank you the delivery was pretty fast well.
Review from a similar Stainless Steel in Hitch Covers
Had to wait a few weeks as my Ford Hitch cover was back ordered, but well worth the wait! etrailer was great to keep me updated through email while I waited. Love the product it looks great on my new Ford F150. I will definitely order again from them .
Adventure G - 06/09/2018Review from a similar Stainless Steel in Hitch Covers
Got my hitch cover about a year ago, today it still looks like I just took it out of the box, no fading whatsoever. I had zero issues with the hitch cover to my surprise, thought it would fade in six months due weather extreme heat, cold, rain and car washes.. Highly recommend..
Review from a similar Stainless Steel in Hitch Covers
Purchased this for my grandson who Just got a new Ram truck.
He loves it and its holding up very well. Looks beautiful on the
truck and protects the trailer hitch. Very well made!!
Grandma P - 12/06/2021Review from a similar Stainless Steel in Hitch Covers
Very good workmanship and appearance.
Could not have asked for better
Review from a similar Stainless Steel in Hitch Covers
Product looks very nice. The 3rd hole on it was the only one that came close to putting a pin in, but was off about a 1/16 of a inch, so l had to drill out the hole in order for a pin to fit. This was the only problem l had.
John W - 01/22/2022Review from a similar Stainless Steel in Hitch Covers
The chrome cover looks great and was easy to install. We wanted to replace the rubber OEM factory hitch cover with something more stylish. This purchase exceed expectations!
Review from a similar Stainless Steel in Hitch Covers
Good quality cover! Looks great on my 2020 Honda COVER-V!
Daniel - 04/18/2022Review from a similar Stainless Steel in Hitch Covers
The hitch cover arrived in a timely manner and is just as promised. It is polished to a very high gloss and is super shiny. It looks really great on my car!
Review from a similar Stainless Steel in Hitch Covers
Nicely built and because you pin it on, no more lost cover in the carwash.
Review from a similar Stainless Steel in Hitch Covers
Happy with purchase. Item as described and able to lock it. The cover I got from Acura will either fall out or be stolen as it cannot be locked.
Review from a similar Stainless Steel in Hitch Covers
Excellent product, well packed, and on time
Wayne - 06/04/2022Review from a similar Stainless Steel in Hitch Covers
The whole point is to display the flag proudly and this product does just that. It looks fantastic. And it is much stronger than the plastic ones, which break off in the car wash. I have mine locked on the receiver because I don't want it stolen. etrailer is always great.
Review from a similar Stainless Steel in Hitch Covers
Well made really stands out, stainless mount, plastic emblem sturdy, fits 1 1/4" hitch
One wonders why all covers made for 1 1/4" with and adapter for 2" so there would be no need for 2 sizes. I attached it to my E Trailer hitch on my Corvette. Yes a tow hitch on a Corvette for bike rack.
Review from a similar Stainless Steel in Hitch Covers
This is the second time I have purchased a trailer hitch from this company. I only had to replace this product because I was rear ended a few weeks ago by another driver. The tow bar took all the damage and while it had to be replaced, it protected the back of my jeep from further impact.
The team at etrailer have great customer service and the products are top notch, since they don't sacrifice on quality. They come highly recommended!
Review from a similar Stainless Steel in Hitch Covers
Have enjoyed my S/S Hitch Cover immensely and have gotten many Semper Fi and
OORAH !!!! remarks. It has held up and looks like new after one year. Great product to make your auto look clean and neat.
It must have been made in America!!
Thanks
Review from a similar Stainless Steel in Hitch Covers
E trailer was great to deal with. 5 stars for me!
Review from a similar Stainless Steel in Hitch Covers
The flag part came off on a cold winter drive ...... Found only the peice that goes into the car tow bar ...
Katrina B - 03/29/2022Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.