Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop

See what our Experts say about this CURT Heavy Duty Receiver Hitch

• Front Mount Hitch Receiver Fitment on a 2021 Thor Chateau
  Your best bet for a front mount hitch receiver on your 2021 Thor Chateau motorhome is a universal hitch like the Curt Class V Universal Weld-on Receiver Hitch # 15901. Since there aren't any custom fit options either you or the shop you have doing the installation will need to look at the design of this hitch and the instructions to determine what kind of modifications you might need to make to your motorhome prior to purchasing.
  view full answer...
  
• Recommended 10,000 lbs Capacity Hitch for a Motorhome
  I have a universal hitch that will fit your Gulf Stream and provide you with the needed 10,000 lbs towing capacity but it must be welded on. It is the Class V Universal Weld-on Receiver Hitch item # 15901. None of the bolt on hitches have a capacity higher than 5,000 lbs. I have linked the instructions below so you can take a look at the steps and understand the process.
  view full answer...
• Higher Capacity Hitch that Can Fit 42 inch Vehicle Frame
  For a higher capacity multi fit hitch that could be used on a 42 inch wide vehicle frame we have the Curt hitch part # 15901 which would work great. This hitch has a towing capacity of 15,000 lbs and can fit frames that are between 18 inch and 44 inch so it would work great for you.
  view full answer...
• Trailer Hitch for 2011 Mercedes-Benz Sprinter 3500 With 30-3/8 Inch Frame Width
  I have a solution for you but there are no custom fit hitches for the narrow 30 3/8 inch frame 2011 Mercedes Benz Sprinter 3500 Dually models. They weren't as widely produced and some have a service body or step bumper which obstructs where a hitch would be mounted. If your Sprinter has a step bumper you will need to remove it. Once that's done, you'd want to measure the drop needed. The drop is the vertical measurement from the underside of the vehicle frame member and the lowest point...
  view full answer...
• Availability of a Trailer Hitch for a 1956 Chevrolet 210 Townsman Station Wagon
  None of our hitch suppliers offers a bolt-on custom-fit trailer hitch receiver of any size for your (awesome!) 1956 Chevy 210 Townsman Station Wagon. Your one option is a universal-fit RV-type hitch, such as the Curt # 13703. Please keep in mind that you will be on your own in terms of determining proper fit. Also, since this will be an untested application your actual tongue weight and towing capacities will be unknown. The vehicle itself may have different capacities than the hitch....
  view full answer...
• Trailer Hitch Recommendation for Minnie Winnie Motorhome on 2006 Ford E-450 Chassis
  For your application we're going to need to look at a universal trailer hitch as there aren't any custom fit options for a 2006 Ford E-450 Minnie Winnie motorhome. Custom hitches are pretty cut and dry as to what they fit but for a universal hitch you'll need to do a little checking on your end to make sure it will fit correctly. For example, the Class V Universal Weld-on Receiver Hitch # 15901 fits vehicle frames from 18" up to about 44" and the receiver will sit 3" below the mounting...
  view full answer...
• Recommended Trailer Hitch Receiver for 2003 GMC Savana 3500 Cutaway
  The hitch with the 7 inch drop you are talking about is the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" # 41990-07. The reason this has a 7" drop is because it is a universal weld on hitch designed for heavy-duty and commercial vehicles. The brackets also have a 16" drop option, it is going to depend on the vehicle and what you need since it is a universal design. The only requirement for this hitch is the frame, it fits frames up to 44". So in a...
  view full answer...
• Heavy Duty Hitch For 2013 Coachmen Leprechaun Class C
  I have a solution for you. I see a couple of options, you can go with the Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop # 15901. It is a weld-on hitch with a Gross Trailer Weight (GTW) of 15,000 pounds and a Tongue Weight (TW) of 1,500 pounds Or we have the Curt Class 5 Universal Weld-on Hitch w/ Brackets # C47CR. This is a weld-on hitch with a GTW of 16,000 pounds and TW of 1,600 pounds. You will also need the brackets with this one. We have the 7" Weld-On Bracket...
  view full answer...
• Heavy Duty Trailer Hitch For 2009 Ford E450 Cutaway
  No but you can use a universal hitch as there are no custom fits. For a Class V hitch that you can bolt or weld onto your frame that is 42 inches from outside to outside you can use one from Draw-Tite: - Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 Or for a weld-on only you can use the Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop # 15901.
  view full answer...
• Recommended Trailer Hitch For An Isuzu Box Truck With a 33.5 Wide Frame
  We do have options for a hitch for your Isuzu box truck with a 33.5" frame. I recommend the Curt Class 5 Universal Weld-on Hitch # C99CR. This hitch can be adjusted to fit frames between 18" and 44" wide. The side flanges are 18" tall, and can be fabricated to fit a wide variety of vehicles. This is technically a class 5 hitch rated for 16,000 lbs. We do not offer any class 4 bolt on options as this time.
  view full answer...
• Availability of Trailer Hitch for 2017 Mercedes-Benz Sprinter 3500 With 30-3/8 Inch Frame Width
  There are two primary reasons why a hitch isn't available for the narrow framed Sprinter 3500 models. First, the vehicles aren't super-common, the wider framed vehicle is much more prevalent. Secondly, most of these vehicles are used as commercial vehicles that have been equipped by aftermarket upfitter companies that commonly add utility or service bodies or steps such as your vehicle is equipped with. It'd be difficult for the hitch manufacturers to develop a hitch because the way the...
  view full answer...
  
• High Capacity Trailer Hitch that Fits 2008 Tiffin Allegro Open Road 34TGA
  For your 2008 Tiffin Allegro Open Road 34 TGA that could have been built on a Ford, Freightliner, or Workhorse chassis we have the Curt Class V hitch part # 15901 listed as a fit which has a 15k towing capacity. This is a weld on style hitch that is semi custom fit meaning it doesn't bolt right up. The brackets would get welded to the main crosstube at the correct width to fit your trailer frame and then the brackets
  view full answer...
• Recommendation for Class 5 Hitch to Fit 1995 Ford F350 with 34 Inch Frame and Flat Dump Bed
  Based on the size of your frame, it sounds as though your 1995 Ford F350 is the Cab and Chassis style. Curt offers a Class IV Receiver Hitch, # C14082, that with bolt directly to your vehicle's frame with no welding required. This hitch has a 1000 pound tongue weight capacity and 10000 pound towing capacity. We do not offer a custom Class V hitch for your truck but universal Class V hitch receivers are available. Curt offers the Universal Weld-On Receiver, # 15901, with 3 inch drop and...
  view full answer...
• What Hitch do You Recommend for My Japanese 1992 Toyota Hilux?
  For your 1992 Toyota Hilux, we did have a neighbor that installed the Curt Trailer Hitch Receiver # 13086 on his Toyota Hilux model. I went ahead and attached a picture of the fitment of the hitch on his truck. However, I called Curt and my contact confirmed that there is no way of telling if that hitch will fit for sure on your 1992 Toyota Hilux. Also, as you can see in the attached picture, the hitch does not have the cleanest installation. With that being said, I recommend a universal...
  view full answer...
  
• Can A Custom-Fit Front-Mounted Trailer Hitch Be Modified To Be Less Noticeable
  Hi Patrick, With custom-fit trailer hitches like the Draw-Tite # 65064 you were looking at there really isn't any modifications that you can make to the hitch to have it sit further in. If you went with a weld-on hitch you could play around with it a bit more to get it sitting where you want. You will have to do a bit of measuring at first to figure out the correct drop needed though. We offer the following drop lengths: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop...
  view full answer...
• Custom Hidden Trailer Hitch Options and Parts that May be Needed for a 1985 Chevy Stepside Pickup
  There is no custom fit trailer hitch available at this time that will install on the 1985 Chevy Stepside pickup and be hidden behind the License plate. I have seen this done in the past but it is a custom fabrication project that requires using a qualified weldor to fabricate a hitch with the proper capacity, and fit for your particular situation. You will also need to come up with a license plate bracket that will allow you to install the ball mount and hook up safety chains to safety...
  view full answer...
• Best Class V Trailer Hitch for a Class C Motorhome
  I do still have an option for you in the Class V Universal Weld-on Receiver Hitch part # 15901 but it sounds like you are looking for a custom fit trailer hitch and none of the trailer hitch manufacturers we offer custom fit them to motorhome chassis. Therefore, you will need to notify the above to work for you. It has a class v rating with adjustable brackets that will accommodate your motorhome with slight alterations. The low profile brackets will also provide you with the flush look...
  view full answer...
• Availability of a Class IV or V Trailer Hitch to Fit 1975 Chevrolet Blazer
  I do have a solution for you. However, the Draw-Tite Class III hitch # 75129 is the only confirmed hitch that will fit a 1975 Chevrolet Blazer. There are no custom-fit Class IV or V hitches for this model vehicle. The Curt Class V Universal Weld-On Receiver Hitch, # 15901, may be an option for your 1975 Blazer. The bracket can fit a frame that has a minimum width of 18 inches to a maximum of 44 inches. The mount brackets are welded to the frame. The side brackets will also provide a drop...
  view full answer...
• Class V Trailer Hitch Receiver Option For 2023 Thor Challenger Motorhome on Ford F-53 Chassis
  We have a couple options for a heavy-duty Class V hitch, and while there is not a custom-fit option for your Thor Challenger motorhome on a Ford F-53 chassis, you can still add a weld-on hitch. From my research, the rear frame on the F-53 chassis is 34 inches from outside to outside, but you'll need to measure the distance you need from the bottom of the frame to the top of the receiver. Once you know that, you can choose from any of the following Class V hitches: - 3" Drop From Frame:...
  view full answer...
• Trailer Hitch for a Champion Crusader Shuttle Bus
  For a Crusader Shuttle Bus, there is not a custom-fitted hitch, so a universal hitch will be the way to go. A good weld-on hitch is the Class V Curt, part # 15901. This has a 15,000-lb gross towing weight capacity and a 1500-lb gross tongue weight. It can fit frames between 18" and 43.88". Your shuttle bus does seem to have a large bumper, so you may want to look into a hitch with a longer receiver. Another Curt option is the RV hitch, part # 13703. This can be a bolt-on or weld-on hitch,...
  view full answer...
• Is there a Class IV or V Hitch Available for a 1989 International S1600
  We have 2 hitches that might work depending on the specific measurements of your 1989 International. Curt hitches 15901 and 15902 are both weld-on hitches that will fit frames from 18 inches wide to 44 inches wide. The 15901 has a 5 inch drop. The 15902 has a 13-1/2 inch drop. I am not certain if the hitch itself, being 44 inches wide, will interfere with anything else under the vehicle (seeing as it is 10 inches wider than your frame rails). So you will need to check and see if clearance...
  view full answer...
• Front Mounted Trailer Hitch Options For A 2024 Jeep Wagoneer
  Hi Stephen, There isn't a custom-fit front hitch available but we do offer adjustable-fit weld-on trailer hitches that you can cut to fit your frame and weld in place. We offer a variety of drops so you'll want to do a bit of measuring on your Wagoneer to figure out the best drop to fit the receiver tube either through fascia or beneath it. Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR
  view full answer...
• Universal Hitch for a Freightliner P700 or M45
  The only styles of hitches that can be made to fit a service body truck like your Freightliner P700 or M45 are universal hitches like the Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop item # 15901.
  view full answer...
  
• Will Buyers Products Hitch Plate # 3371809060A Fit 33 Inch Frame Width
  The side mounting plates on the Buyers Products Hitch Plate # 3371809060A are spaced apart by 34-1/4 inches, inside to inside. This is likely a bit too large for the 33 inch wide frame on your vehicle. Your best option may simply be with a weld-on hitch like the Curt Class V # 15901, which will work on frames that are between 18 and 44 inches wide. This unit features a 2 inch receiver opening and a 15,000 pound towing weight capacity. It is assembled right here in the USA and the mounting...
  view full answer...

Do you have a question about this Heavy Duty Receiver Hitch?