Curt Class V Universal Weld-on Receiver Hitch and Brackets with 10.865" Drop
(89 reviews)
Price: $283.70
In Stock
Curt Class V Universal Weld-on Receiver Hitch and Brackets with 10.865" Drop
Item # 15902
Retail:$444.95
Our Price: $283.70
You Save: $161.25
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (89)
- Q & A (0)
- Photos
CURT Heavy Duty Receiver Hitch - 15902
- 2 Inch Hitch
- Weld-On
- 18 - 44 Inch Wide
- Class V
- CURT
This class V universal weld-on trailer hitch receiver with brackets and 10.865" drop is designed for use on service body trucks and utility body trucks.
Features:
- Universal hitch designed for use on service body trucks and utility body trucks
- Heavy duty, universal side bracket design
- Adjustable side brackets slide along hitch body to match exactly the width of your vehicle frame before being welded to the hitch
- Side brackets fit frames from 18" up to nearly 44"
- Side bracket height produces a drop of 10.865" from the vehicle frame
- Black powder coat finish resists rust and corrosion
- Strong, secure all-frame attachment
- Solid construction for maximum strength and safety
- Assembled in the USA
Specs:
- 44" wide trailer hitch receiver
- 2" square receiver opening
- 1/4" thick brackets
- Side brackets must be welded onto hitch and vehicle frame
- Side brackets fit frames from a minimum of 18" to a maximum of 43.88"
- Bracket height produces a drop of 10.865" from the vehicle frame
- Capacity ratings: GTW up to 15,000 lbs and TW up to 1,500 lbs
- Limited lifetime warranty
Warning: All welding surfaces must be cleaned to bare metal or weld will not be the required strength and may void the warranty.
15902 Curt Class 5 Universal Weld-on Receiver Hitch and Brackets with 10.865" Drop
Installation Details
Tech Tip
Welding required
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Product did not meet expectations
Customer Reviews
Curt Class V Universal Weld-on Receiver Hitch and Brackets with 10.865" Drop - 15902
Average Customer Rating: 4.8 out of 5 stars (89 Customer Reviews)
This class V universal weld-on trailer hitch receiver with brackets and 10.865" drop is designed for use on service body trucks and utility body trucks.by: EAVgirl07/14/2023
It’s beefy and solid. The mounting bracket square holes had to be cut in a smidge and he added two more support bars.. but all in all. My welder said it would tow 11-12 k. Not the 16k I was told. But hey. I’m okay with that. There was a shipping issue which forced me to reschedule a few things, that is the only reason I gave 4 stars. Otherwise I am supper happy with how it turned out.
by: Rodney07/09/2018
Very happy with this hitch. The size of the end plates matched the frame on our old truck and with the class V weight rating, our old truck can do a few other things around the farm now. Thank you.
by: Roger 08/31/2023
Great product. Fast delivery
by: Roland G.04/21/2015
I called to ask what was the inside dimension of the big square and it was said to be 4 1/2" square, that wasn't even close, it was 3 5/8" square.
But I was lucky I needed 3 1/4 square. I'm modifying this to fit my fisher plow bracket so I have a front hitch to use around the yard. Nobody makes one. I own a machine shop so by getting this saves me a lot of work. So by receiving the wrong info I rating you less than EXCELLENT
by: Clark D.07/26/2011
What a great hitch for a great price. I attached this to the rear of my Freightliner FLD-120. What a beast! The perfect hitch! Thanks
by: Kellen06/23/2018
Heavy duty hitch. Easily installed. However I am a welder fabricater with 30 years experience.
by: Dan P.11/20/2016
Easy installation and after one year of heavy use, still going strong!
by: Michael 08/27/2020
This is a very heavy duty hitch. Haven't gotten it mounted yet, but looks to be of good quality.
by: Paul 09/02/2021
Paul
10/17/2022
excellent product!!Modified to fit on my military truck to enable hauling of civilian trailer as well as the military lunette coupler depending which is needed.
by: Matt 09/14/2016
Fast shipping and quality product at a reasonable price.
by: James 10/02/2021
Great service, quick delivery. Would re commend
by: David08/19/2023
by: Justin 04/12/2023
by: Francis 02/24/2021
by: David01/24/2024
It is very well built and the powder coating is very tough, took a good grinding to get it off for the welds. Good price as well. I used it for my 2006 Bounder 35E, not because it was a high rate hitch, as I did not need one, but this was the only one that would lower the hitch to a more normal height from the ground. The old hitch was so high a 10" deep was not enough to use a trailer parallel to the ground. Now I can hook up a lot easier and not worry about scraping. Looks good too.
by: James08/19/2023
Great quality product from Curt . Can be easy installation depending on the application.. mine more difficult because of aluminum alloy frame, so will have to do some reinforcing.
by: Jon12/09/2023
I put this on my 03 Freightliner Columbia. It does everything I want it to. It is bolted and welded.
I like it so much that a bought another one and put it on my old school bus. That one is just bolted on.
by: Paul10/10/2022
attached this hitch to my 1984 American General 5 ton military truck. Had to do some modification to air lines and drill a few holes but it is perfect for pulling civilian trailers with the M 813.
by: Derrick 09/13/2023
Added (welded) to our diesel pusher Motorhome and have no issues and really no worries while towing whatever we feel we need while camping.
by: Gilles 04/19/2024
Fast shipping
by: Brandyn02/15/2024
I think you guys should send me some ap parel!
by: Kem03/20/2023
Well, I really respect the fact that they waited for one year before asking for a review, they offer a 2 inch and a 2 1/2 inch receiver the 2 1/2 inch receiver would obviously be a larger rectangle to accommodate a half an inch, the vertical uprights I received had holes pre-cut to accommodate a 2 1/2 inch receiver I ordered a 2 inch receiver, needless to say, there was an abundance of slop, half inch gaps, requiring a lot of fabrication on either side of the vertical uprights, knowing this now, going with the 2 1/2 receiver should have saved a ton of unnecessary fabrication time.
by: Charlie11/28/2023
Exactly what we wanted. Worked perfect on our recent, extended trip to Alaska and back.
by: Ryan 02/15/2024
Solid as stone!!
25
89
Show More Reviews
See what our Experts say about this CURT Heavy Duty Receiver Hitch
- Correct Hitch for 2019 Freightliner Sprinter 3500The correct hitch for your 2019 Freightliner Sprinter 3500 depends on the wheelbase and bumper. To keep it simple I have two options for you where the only difference is the bumper style. -Draw-Tite Max-Frame Trailer Hitch Receiver # 75549 (144" or 170" wheelbase with standard bumper) -Draw-Tite Max-Frame Trailer Hitch Receiver # 75601 (144" or 170" wheelbase with factory step bumper) You will also need to know the outside to outside frame measurement. If it is 30-3/8" then there are...
view full answer... - Parts Needed To Tow a Trailer With Electric Trailer Brakes Behind a 2015 Freightliner M2You will need the Curt Class V Universal Weld-on Receiver Hitch # 15902 for your 2015 Freightliner M2. This will allow you to weld on a receiver with up to 10.865" of drop. For the trailer lighting you will need a combination of the Curt Powered Tail Light Converter # C59236 and the Universal Installation Kit # ETBC7 to get to a 7-way blade trailer connector. Do note the wiring to reach the battery is 25' long so if your chassis is longer you will need additional Wire # 10-2-1 to reach...
view full answer... - Thickness of Side Plates on Curt Hitch 15902The Curt hitch part # 15902 that you referenced that you referenced has side plates that are 1/4 inch thick. The hitch has weight capacities of 15,000 lb total trailer weight and 1,500 lb tongue weight.
view full answer... - Will Curt Front Mount Hitch Fit 2010 Toyota Tacoma With ARB BumperWithout having the vehicle with the bumper installed to check, and with no instructions available for your ARB bumper, it is not something I can confirm. Based on the brackets I can see on the ARB it looks like the bumper and the Curt # 31313 would interfere with each other. The ARB bumper does appear to sit higher so I don't think clearance wouldn't be an issue. What you can do is compare the instructions attached below to your vehicle to see if you would be able to install it using...
view full answer... - Class V Trailer Hitch Receiver Option For 2023 Thor Challenger Motorhome on Ford F-53 ChassisWe have a couple options for a heavy-duty Class V hitch, and while there is not a custom-fit option for your Thor Challenger motorhome on a Ford F-53 chassis, you can still add a weld-on hitch. From my research, the rear frame on the F-53 chassis is 34 inches from outside to outside, but you'll need to measure the distance you need from the bottom of the frame to the top of the receiver. Once you know that, you can choose from any of the following Class V hitches: - 3" Drop From Frame:...
view full answer... - Recommended Trailer Hitch Receiver For A 1999 Toyota Prado RHDHi Colin, Since there isn't a confirmed fitting custom-fit hitch for a 1999 Toyota Prado RHD the only option would be to install a weld-on adjustable-fit trailer hitch. We haven't had a Prado in to test it for a fit with a 4Runner trailer hitch unfortunately. We have a few different sizes depending on the drop you'll need to clear the rear fascia: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop...
view full answer... - Class V Trailer Hitch for 2015 Forest River SR340 Diesel Pusher Motor HomeWe do not offer a custom-fit Class V hitch for your 2015 Forest River SR340 diesel pusher motor home but we do have universal-fit hitches that can work for you. Installation will just be a bit more involved than for a bolt-on hitch. For example, Curt offers their weld-on 2-inch Class V hitch # 15903 rated for up to 1500-lbs tongue weight and 15,000-lbs gross trailer weight. We also offer Curt hitch # 15902 for frames between 18-and 44-inches wide that offers about 10-inches of drop. Curt...
view full answer... - Trailer Hitch Receiver for 2006 Chevy Express 3500 Cutaway Box TruckYou will need to weld to the frame one way or another to have a hitch installed on your box truck. The hitch on the picture you attached is still connected to the frame underneath, it just runs up through that step bumper. If you wanted to attempt to replicate that setup you could take the Curt Combo Bar # C49360 to a custom fabricator and have them design it to fit your truck. The other option is to use a universal hitch like the Curt Class V Universal Weld-on Receiver Hitch # 15902....
view full answer...
- Trailer Hitch Receiver Options For A 2005 Ford E-350 School Bus Hi Jacob, The Curt Trailer Hitch Receiver # 14053 lists that it's a fit for cutaway chassis if the bolt holes are 38-5/8 inches from frame to frame. This would mean that the holes in your frame have to be spaced 38-5/8" from center to center in order for the hitch to work. With your vehicle be a school bus and the dimensions that you stated you'll likely have to go with a weld-on adjustable fit trailer hitch receiver. You'll want to measure the distance down from the frame to clear...
view full answer... - Front Mounted Trailer Hitch Options For A 2024 Jeep Wagoneer Hi Stephen, There isn't a custom-fit front hitch available but we do offer adjustable-fit weld-on trailer hitches that you can cut to fit your frame and weld in place. We offer a variety of drops so you'll want to do a bit of measuring on your Wagoneer to figure out the best drop to fit the receiver tube either through fascia or beneath it. Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR
view full answer... - Trailer Hitch For 1991 Spartan Diesel PusherYou'll need a weld-on hitch for your 1991 Spartan diesel pusher as there are no custom fit options. To find the right one you need to measure your frame from outside to outside as well as the drop you need from the top of the frame to the bumper. So long as your frame measures between 18" and 44" you can use one of the following: - Curt Class V Universal Weld-on Receiver Hitch and Brackets with 3" Drop # 15901 - Curt Class V Universal Weld-on Receiver Hitch and Brackets with 10.865" Drop...
view full answer... - Potential Front Hitch For A 2024 Honda CR-V Sport Touring HybridHello Tom. I am sorry to say that we currently do not offer a custom fit front hitch for a 2024 Honda CRV. We do have rear trailer hitches such as the etrailer Class 3 Hitch # e98848 that you were looking at, but unfortunately nothing for the front. Since there is no custom fit front mount trailer hitch receiver for your CR-V, the only option would be to have a universal trailer hitch receiver like the Curt Class V Universal Weld-on Receiver # 15902 fabricated to fit the front of your...
view full answer... - Trailer Hitch receiver For A 2011 Ford Expedition EL Hey Brian, That is correct, manufacturers do not offer a bolt-on trailer hitch receiver for 2011 Ford Expedition models. You'll have to go with a weld-on hitch and would need to measure the distance between your frame down to clear the bumper so that you can choose the correct drop: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR
view full answer... - Will The Draw-Tite Trailer Frame Hitch Receiver Fit A 1974 Chevy K5 Blazer With A Gas Tank Shield The Draw-Tite Max-Frame Trailer Hitch Receiver 75129 should fit with any OEM parts but just to be used I went out to the warehouse and measured the hitch. From the back of the crossmember tube to the center of the first bolt hole is 1". The distance between the inside of both mounting ears is 30-1/4". This hitch should sit directly under your frame rails so you can use that 1" measurement to see if the tube will run into interference with your gas tank shield. If this doesn't work then...
view full answer...
- Trailer Hitch That Exits Through License Plate Area with a Roll PanI do have a trailer hitch receiver option for your 1970 Chevrolet C10 Pickup but none of our customer fit trailer hitch receivers we have for you will exit out of the rear licence plate area on your truck with a roll pan attached. I am also not aware of a customer fit option with the above criteria that is made for your truck. The only way to have the receiver tube opening stick out the rear license plate area through the roll pan on your truck would be to cut/weld the Curt Class V Universal...
view full answer... - Trailer Hitch Recommendation for a 1997 Damon Intruder with 10,000 lb Towing CapacityWe may have something that will work for you, but keep in mind, trailer hitch manufacturers do not make custom fit hitches for RVs and motor homes. A universal hitch is used and is typically bolted or welded to the frame of the RV and in some cases the mounting brackets have to be modified. You will also have to remove the existing hitch, but I recommend holding on to the mounting brackets as templates just in case the mounting brackets for the new hitch have to be modified. I also recommend...
view full answer... - Recommendation for a Weld-On Trailer Hitch for a Freightliner Step VanYour best option is either going to be going with a Curt hitch, # 15902, or going with one of the hitches with 16 inch brackets like # 41990-16. This hitch is closest to what you need. You will need to have a qualified professional welder perform the installation. I have included a link to the installation details for the Curt hitch for you.
view full answer... - Availability of a Trailer Hitch for a 1956 Chevrolet 210 Townsman Station WagonNone of our hitch suppliers offers a bolt-on custom-fit trailer hitch receiver of any size for your (awesome!) 1956 Chevy 210 Townsman Station Wagon. Your one option is a universal-fit RV-type hitch, such as the Curt # 13703. Please keep in mind that you will be on your own in terms of determining proper fit. Also, since this will be an untested application your actual tongue weight and towing capacities will be unknown. The vehicle itself may have different capacities than the hitch....
view full answer... - Class IV or Class V Hitch Availability for 2008 Dodge Ram 2500 with Roll Pan BumperThe Class IV and Class V hitches we offer for your 2008 Ram 2500 pickup, viewable on the link provided for you, are designed for use on trucks that have a factory-installed standard bumper or in conjunction with a factory welded on hitch. We have no custom-fit aftermarket Class IV or Class V hitches for your truck that will work with your roll pan bumper. You may be able to install a universal-fit hitch such as the Curt Class V Universal Weld-on Receiver Hitch # 15903 or # 15902 but you'll...
view full answer... - Trailer Hitch for a 2006 Chevy Silverado 2500HD with Reading Utility BodySince you have that utility body the custom fit hitches for the 2006 Chevy Silverado 2500HD will not work. What you will need is a weld-on hitch. I have included a link to the options for you. A hitch like # 15902 creates a drop of 10.865 inches from the truck frame. Installation should be performed by a qualified professional welder.
view full answer... - Trailer Hitch Receiver For a 1956 Chevy 4400 Flatbed Dump TruckI recommend using the Curt Class 5 Universal Weld-on Hitch w/ Brackets # C47CR for your 1956 Chevy 4400. This universal hitch will allow you to fit a frame from 18" to 44" wide. The frame mount brackets are 10" tall and 10-1/2" deep. Be sure to measure your frame and bumper to determine if you will need taller brackets like those included with the Receiver # 15902. There are currently no custom fit receivers for the frame of your Chevy.
view full answer... - Hitch For 2015 Freightliner 3500 With 30-3/8 Inch FrameThe only possible option for your 2015 Freightliner 3500 with a 30-3/8 inch frame is a weld-on universal hitch, the Curt Curt Class V Universal Weld-on Receiver Hitch and Brackets with 10.865" Drop # 15902. This has a crosstube that measures 44 inches so you need to make sure you have the space under the frame for it to fit without interference. I cannot recommend just using spacers for the Curt hitch, and I would not be able to tell you why the 3500 has different dimensions.
view full answer... - Recommendation for Class 5 Hitch to Fit 1995 Ford F350 with 34 Inch Frame and Flat Dump BedBased on the size of your frame, it sounds as though your 1995 Ford F350 is the Cab and Chassis style. Curt offers a Class IV Receiver Hitch, # C14082, that with bolt directly to your vehicle's frame with no welding required. This hitch has a 1000 pound tongue weight capacity and 10000 pound towing capacity. We do not offer a custom Class V hitch for your truck but universal Class V hitch receivers are available. Curt offers the Universal Weld-On Receiver, # 15901, with 3 inch drop and...
view full answer... - Front Mount Trailer Hitch For A 2021 RAM 5500 DieselThough the front mount hitch # EH37FR is not confirmed to fit your 2021 Ram 5500 The Curt Class V Universal Weld-on Receiver Hitch # 15902 can be fabricated to fit the front of your 2021 Ram 5500. The hitch has a black powder coat finish that will resist rust and corrosion. The side brackets will fit from 18 inches to nearly 44 inches. It has a solid construction for maximum strength and safety. I attached a review video link below.
view full answer...
Do you have a question about this Heavy Duty Receiver Hitch?
Info for this part was:
Installed by:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
7/17/2023
The hitch looks good! The hitch itself is rated to tow up to 15,000 pounds however it is limited to the frame and or bumper capacity that the hitch is welded. So if the RV is only rated to tow 11,000 pounds then that is what you would want to go by.