To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
Specs:
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
The installation went exactly according to plan, and the final install looks great. I used a mechanic's creeper and some ramps, which was extremely helpful. The videos on the website were excellent, showing every little detail. I cut an extra hole in the bumper for a 7-way connector, and I'm very happy with how it turned out.
First off - this thing is a BRUTE! Nice thick metal construction, grade 8 hardware all around. Installation was pretty straightforward. Hit a few small hangups on the exhaust side - washers were getting hung up on heat shield. DEFINITELY make sure the threads are chased/clean on the welded nuts. I pre-fitted every bolt and drove them in all the way ahead of installation. Beyond those small hiccups it was relatively easy. Also - etrailer does a PHENOMENAL job with their packaging. This thing could have been dropped off the Empire State Building and been completely intact (ok, so a bit of exaggeration, but still). If you're gonna be towing with your Telluride - this is definitely one receiver to look into.
Brooke M.
6/16/2025
Glad to hear you're happy with the quality of the hitch to the packaging, Tom! Looks like you did great with the install, too :) What will you be using your hitch to tow?
Hitch is well made and installation was pretty straight forward. Only comment was packaging could be a little better. I had to do some paint touch up as it was worn down to bare metal in 2 areas. But overall a great product with perfect fit.
Good quality, came with all nuts and bolts needed. It actually took longer to move somethings out of the way to be able to install it then it did actually installing the hitch.
Very easy to install. Love the product. Saved about $1000 dollars over the dealer quote and very satisfied with my etrailer hitch. Highly recommended.
Brooke M.
5/5/2025
Yes! Love to hear that :) We are all about the DIY life! Looks like you did a great job on you '25 Kia Telluride.
Hitch installation went well. Good hitch. I just use it for a bike rack and it works well for that.
Gwendolyn Y.
10/2/2025
What kind of bike are you carrying, Alan?
Installing the hitch was quick and easy. The only problem was the measurements provided in the instructions to cut the plastic panel were off by 3/4". Measure twice - cut once. Anyway it all worked out.
Joseph
11/19/2025
The hitch works great. No issues at all.
This was the 3rd eTrailer hitch receiver I've purchased. The fit and finish is great and the materials are heavy duty. It took me about 2.5 hours to install but I'm 72, don't have any air powered tools and worked alone in my garage. (Did i mention this sucker is heavy?)
I highly recommend this item.
This is my second hitch from etrailer. The item shows up quick and looks great.
Gwendolyn Y.
6/8/2025
I agree, it does look great! High-five on the install, Aaron.
Quality product and great installation video
The hitch fits nicely. I had someone install it for me with no problems.the bumper did need a small cut.
Etrailer’s customer service is of the highest standard from booking my appointment and the satisfaction follow through after installation. I would highly recommend Etrailer to anyone who wants personal customer care, professional installation and the custom fit designed for my vehicle.
Was able to install in my drive way and has been working great.
One heads up - would have been helpful to do the catalytic converter side of the install in the "how to" video.
Peter
8/4/2025
Great! 0 issues - I use it for a VelociRax 6 bike rack - no issues although the Kia has a low-ish ride height - so go slow thru dips!
All bolts and other hardware was included with the hitch. All mounting instructions were correct and easy to follow. Thank you for making this product.
Bruce
6/21/2025
A year later after installing the hitch and I continue to be completely satisfied with the product. I continue to find the quality of materials to be excellent. I would recommend this product without hesitation.
Awesome. Everything was perfect. Installed it quite fast. The area around the exhaust pipe is very tight but in the end I could manage it.
Brooke M.
3/6/2025
So glad to hear that, Alan! What all did you do to get around the exhaust? Did you have to move them at all or just finagle the hitch around them?
Great heavy duty hitch
Installation was straight forward - the only qualm I have with the 1-page installation guide was the dimensions for trimming the plastic bumper fascia were completely wrong for the 2025 Kia Telluride. Good thing I triple checked with a tape measure from the edges of both left and right where the plastic fascia clicks in. Other than that, it's a very clean install and the matte black is fire.
Instructions were simple which made it easy to install. Looks good on my Telluride. Has good ground clearance on my steep driveway.
Danny
7/14/2024
Great! No issues!
Fairly easy to install and looks great. Installed on 24 Telluride SX Xline
I like that it doesn't protrude pass the bumper.
I haven't used it yet but it seems like it will work great. I has a nice snug fit where I won't worry about dragging it going in and out of the driveway like in our other vehicle. The install was fairly easy but the exhaust area is a challenge. I only had a jack and that didn't provide the clearance needed to do the work around there very easy. Even with removing the hangers for the exhaust. Some car ramps might have been the better option. It can be done with a jack, you just have to be a little patient.
Racheal A was awesome when I called to verify the tow hitch, I found on the website, actually would work. She handled everything over the phone, and it arrived quickly. The quality of the hitch top notch and the installation was exactly like the video on your website. I did not have a lift, so installation took a little bit longer, but not bad at all. Thanks for the help, I'll be back.
Had my dealership put it on, no problems at all! Works great, only gripe is I had to buy separate wire harness and for whatever reason it didn’t fit my Telluride. Dealership had me covered though.
Perfect fit. I have a 2023 Kia Telluride and this unit fit the factory holes perfectly. I did cut the plastic bumper in way of the receiver, using a razor knife, and it looks like factory install.
Hitch is sturdy and well built and was easy enough to install. Would have given it 5 stars but the packaging was poor and as a result it was damaged with deep scratches through the powder coating into the metal where the box tore during shipping.
Heather A.
4/1/2025
Awe crap.. let's get you a paint credit so you can cover those scratches. We always recommend to cover those scratches with a Rust-Oleum paint to prevent any future rusting. I also attached a help article for your reference.
Helpful Links
Arrived on time!!
I installed it and your instruction video was most excellent. It was necessary to remove/install heat shield over muffler to allow room to insert mounting bolt-that wasn’t mentioned in the video. Took some wrangling to reinstall the shield. All good in the end.
Jonathan
4/6/2025
Well, it’s been about a year since I installed the hitch, and hey, it hasn’t fallen off once! It’s still snuggly attached with no rattle after a using for several 1000-mile 4000-lb hauls. The finish is holding up nicely, too.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
7/9/2025
I personally haven't ever seen someone add the hole to the bumper for the 7-way...it looks so clean! Thanks for sharing the photos and your genius!