bing tracking image
Q & A Icon

Recommended Hitch for a 1995 International 3800 Bluebird School Bus  

Updated 01/19/2026 | Published 01/18/2026

Question:

Good afternoon - Im looking to upgrade our trailer hitch. We have a 1995 International 3800 Bluebird school bus, the frame span between frame rails is 32, currently we have a universal Curt bolt-on hitch but it is only rated to 5000lbs GVWR. I am looking to upgrade to 8000 - 10,000 GVWR to pull an enclosed car hauler. Could you help me find the right hitch? I cannot filter by width - perhaps you know a part that might fit? I really appreciate your time and help - and all of the great products on your site : Best Regareds,

0

Expert Reply:

Hey Adam, welcome back and thanks for the information! To add a hitch and trailer wiring harness to your 1995 International 3800 Bluebird School Bus, I recommend the Curt Hitch item # C47CR, the 4-Way Upgraded Heavy Duty ModuLite item # # C59496, and the Universal Installation Kit for Trailer Brake Controller item # ETBC7. Your bus was built on a cutaway chassis so there's no custom fit hitch for it. Those chassis don't have the trailer wiring connectors for plug in options either.

The Curt item # C47CR universal hitch includes brackets that weld directly to your Ford's frame. The 2" receiver has a 16,000 lbs towing capacity and a maximum tongue weight of 1,600 lbs. It works with frames up to 44" wide so it'll be perfect for your E-350 chassis. The brackets will give you a 9" drop from your bus's frame.

The 4-Way Upgraded Heavy Duty ModuLite item # # C59496 will connect to the tail light circuits on your bus and provide the lighting signals for the trailer connector. This will add a 4-way connection only.

To add a 7-Way, you will also need the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The 4-way connector will plug directly into it. You'll then run the 12v wire to the battery, the white to a suitable ground, the blue wire to the back of your brake controller, and the yellow wire to your bus's reverse circuit. The 12v wire and the brake controller wire are each 25' long. If you need longer runs, you'll want to grab a few extra feet of the 10 Gauge Wire item # 10-1-1.

What kind of trailer are you planning on pulling behind your bus?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by:
0
Jerred H
Adam G. profile picture

Adam G.

1/19/2026

Thank you for the quick reply -- this is great information and looks like a very easy solution! I can measure the bumper and select the appropriate bracket.

Jerred H. profile picture
Etrailer Expert

Jerred H.

1/19/2026

@AdamG You're welcome! The Curt item # C47CR universal hitch has been a pretty popular one that's for sure. Let me know if you have any additional questions.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>