Replacement for Bumper and Hitch for 2013 Toyota Tacoma
Updated 11/14/2026 | Published 11/11/2026 >
Products Featured in This Question
Question:
Im getting ready to replace the rear bumper and mounting brackets and the factory hitch receiver would you help me with and point me to everything that I need and the right ones for my truck I have a 2013 toyota Tacoma double cab TRD SPORT thank you
asked by: Randy P
Expert Reply:
Hey Randy!
Unfortunately, we don't have a rear bumper kit that will fit your 2013 Toyota Tacoma TRD Sport. I checked with all of our manufacturing partners to try and find a fit, but no luck on that. You may be able to get the bumper and brackets directly from Toyota or other distributors that we don't curry work with or the mounting brackets may be able to be fabricated.
Similarly, all of the hitches we have, like our etrailer Trailer Hitch Receiver # e98850, are specifically made to fit 2013 Tacomas without a factory hitch. Since you're replacing the factory hitch, then these will not be a bolt-on fit. You could go with a universal-style hitch, which requires welding to the frame. Going that route is a very involved process, but if that's something you're willing to do, then I recommend the Curt Class 5 Universal Weld-on Hitch # C47CR. You can cut it to length and once welded to your frame, it will keep your factory maximum towing capacity. It also retains a 2" like your factory hitch.
Is the Tacoma bumper and receiver rusted out and needing replacement or are you just upgrading your parts?
Product Page this Question was Asked From
Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2" Receiver - 44" Wide
- Heavy Duty Receiver Hitch
- Weld-On
- 18 - 44 Inch Wide
- 1600 lbs TW
- 16000 lbs GTW
- Class V
- 2 Inch Hitch
- 9 Inch Drop
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Looking for Hitch that Fits 2013 Ford E-450 Transit Bus
- Q&A: Recommended Hitch and Trailer Wiring for a 1998 Ford E-350 Short Bus
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Trailer Hitch for a Ford F-53 Chassis W/ a 34" Wide Frame
- Q&A: What Hitch do You Recommend for My 2012 GMC Savana Utility Van?
- Q&A: Recommended Trailer Hitch for Ford E-450 Box Truck
- Q&A: Front-Mounted Trailer Hitch Options For A 2006 Ram 1500
- Q&A: What Is The Tube Diameter Of The Buyers Products Class 5 Service Body Hitch 3373006909
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Hitch Receiver Sizes
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)


Randy P.
11/12/2026
Thank you for getting back with me I'll try too do some more research on them before I start or try to weld anything. Both bumper brackets are pretty rusted that's why I need to replace them and the hitch is rusty but not as bad I figured if I'm doing one I want to do both so I won't have to worry about it in the future