Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
This item does not fit your vehicle
2024 Chevrolet Colorado
These items fit your vehicle
2024 Chevrolet Colorado
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
A 2" receiver is the standard size for most bike racks, cargo carriers, and ball mounts, so everything fits without adapters. With a 3,500-lb gross trailer weight and 525-lb tongue weight rating (or up to 5,000 lbs GTW with weight distribution), it’s built for light towing and frequent use. Whether you’re hauling a small trailer, taking bikes out for the weekend, or adding storage space with a cargo tray, this Class III hitch gives you the flexibility to do more.
The fully welded design bolts directly to the frame using the included hardware—no drilling or welding required. It’s a straightforward install that can be done in a driveway with common tools. The precision robotic welding keeps everything aligned for a perfect fit, so installation goes smoothly and the hitch sits level once mounted.
The heavy-duty steel construction is finished with a gloss black powder coat over a protective base layer for superior rust resistance. This finish holds up against road grime and salt while keeping a clean look under the bumper. The round-tube style adds strength without looking bulky, so it’s sturdy enough for towing yet still has a neat appearance.
The receiver accepts standard towing accessories like ball mounts, pins, and clips (sold separately), so you can use the setup that fits your load best. With solid welds and consistent build quality, it’s made for routine use—attach what you need and get on the road with confidence that your hitch can handle it.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Pretty easy to install. Did have some scuffs on the paint even though the outside packaging was not damaged. Hit it with some bedliner in a can and seems to be holding up nicely.
Hitch arrived very bent. Notified them by email and was told this is very normal, then was advised to bend the hitch by using stairs to wedge it and pry it out. Have had to bend it out around two inches and the mounting bracket now has a wave to it.
Mike L.
3/26/2026
I'm sorry that happened Randall. I'll get that taken care of for you.
great product! cant wait to tow my wife around.
Easy install on a 2019 Honda Odyssey as described. Purchased an Alta Rack bike carrier for this setup, however there is a lot of flexing on the trailer hitch while driving the vehicle. The rack is snug, however the hitch itself is flexing when used under the rated weight limits. Frustrating.
Jenny N.
6/17/2022
I recommend making sure that the hitch hardware has been tightened down according to the torque specifications listed in the manual. I also suggest using an anti rattle device with the bike rack which can further eliminate movement. It is part # RM-061.
Product arrived as scheduled, just a lil beat up from transit but overall still in good condition
This hitch receiver was a perfect fit and easy to install with the video from etrailer. This is my second receiver I have purchased from etrailer and I will continue to go to them with all my trailering needs. I have also purchased other items and the customer service is top tier. Great company all around.
Easy install, took an hour to do by myself with the assistance of one jack stand. Works great for our cargo carrier. Very satisfied with this product.
The Installation instructions and quality of the product were the best. I've had the trailer hitch for about a year and think the overall quality and service is the best from etrailer.com.
Excellent service and a great product! The delivery was a bit concerning given the condition of how the box arrived; however, thanks to the foresight in packing & taping the hardware to the hitch, nothing was lost in transit!
Easy to install and fit without issue
TLDR: only uses two of the OEM mounting points instead of all three and flexes too much under heavier load. Poor engineering.
This rack has too much flex. I used this rack for 18 months with my 6 bike vertical bike rack at least 3 times per month and several longer road trips. about 250lbs total tongue weight with all bolts torqued to spec. I use the Timbren SES. I had concerns immediately with the flex, but online reviews said this was unibody flex and “normal”. I resorted to using straps from my roof rails to keep it from bouncing. After seeing another owner with the same hitch had a cracked frame under their hitch, the commenters pointed out the failed design only uses two of the OEM mounting points. I immediately purchased the DrawTite 76171 from E-Trailer that had a longer mounting base and uses all three OEM mounting points. The DrawTite was much easier to install and torque (no carriage bolt), the receiver tube is longer, but actually sits an inch further back, the DrawTite is actually higher off the ground by a few centimeters. For being a heavier hitch, I actually get better ground clearance and my vertical rack sits two inches closer to the van. Best of all, no more flex or bounce with the DrawTite. Avoid this Curt hitch due to the mounting points. If you want a lighter hitch, find a hitch that uses all three OEM mounting points.
Gwendolyn Y.
2/4/2025
Hey Soren. I can definitely see what you are talking about. We did get a recent update from Curt that they are slowly updating their information to state that vertical hanging bike racks can not be used with their hitches. I do wish we had this information back when you first got the hitch so to avoid you having to go through this.
I bought my hitch online Saturday afternoon. It was shipped on Sunday and arrived at the install shop Wednesday. It was installed on Thursday, hitch looks great and works great. It all worked so seamlessly and all I had to do is bring my van to the shop. Thanks etrailer
Instructions were very clear and installation was a breeze. Thank you
installed easily. paint/finish had a couple scrapes from shipping. spray paint fixed the worst of them. Not sure how good the paint/coating quality really is, so I'm a bit skeptical of its quality being any better than draw-tite or other brands.
No mounting bracket for the 4 pin connector, so that leaves something to be desired. Otherwise, very solid feeling receiver with a simple install.
On a Honda Odyssey (2021), you do NOT need to trim the under-panel on the driver side to make it fit with the hitch installed. You can also install with the exhaust in place, but you still might want to decouple the exhaust hanger nearest the section where the receiver is connected to the frame for a bit of extra working room.
Fantabulous service and product is wonderful. Ordered it on a weekend and was on my doorstep by Friday. All hardware was accounted for and securely fastened to the hitch; installation took about 30-40 min with most of the time to get the plastic off.
Great product- will use etrailer for future needs.
I have installed this CURT 13370 in my Odyssey 2022. It fits just right. The instruction and the video link helps a lot (thank you etrailer), I was able to install it by myself. Ordered this to carry bikes easily to any location for a family ride. Tested getting in and out from my home drive way with the bike rack installed and and no issues.
Easy to install thanks to the awesome video. Delivered fast and not damaged.
Gwendolyn Y.
7/7/2025
Looks great, Derek! Glad the videos helped. What are your plans for the hitch?
Installed on a 2020 Honda Odyssey. Fast shipping even a few days before Christmas. Fits perfectly. They send little fish wire springs to make some of the bolts go in easily. They are genius and will be kept for other projects (one tip is only thread the spring on about 3 turns to make it come off without destroying the wire spring). I did carefully trim about a quarter inch of the plastic trim panel that you have to remove on the driver's side around were the bracket of the hitch drops out. I did a review on the harness separately with a few tips for its install. Very pleased!
Great service ,Quick and on time
Ed S.
5/22/2026
The Hitch works out beautifully.perfect fit.
Overall very happy with the purchase, speed of delivery and ease of installation. Wish the wiring kit would come with a bracket/mounting plate to attach the harness to the trailer hitch receiver.
Sierra K.
7/15/2021
Thank you for your review. The mounting brackets are sold separately for this hitch. Here is a 4 pole flat bracket you can install Part # 18144. And here is a no drill feature to add to that Part # 18140.
Super efficient website- we ordered our product pretty last minute for our trip. It gave us an update of every step of the process. The product arrived as expected in the expected time window. 10/10 if I need another setup I would order from etrailer again
There was a YouTube video that made the installation easier. In the video, it showed that the bumper fascia needed to be cut, but the current hitch doesn't interfere. The black trim piece from the driver's side does still need to be trimmed. Overall, the installation was not a problem.
Good quality hitch. Extra cardboard on corners in box is needed. It’s all good.
Easy to install, everything was there. Instructions were a little dark in the photos. Other than that, I'm satisfied with the purchase, the equipment, delivery time. Definitely will be shopping here again.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Hilt D.
9/3/2024
A year in and it is still working fantastic. Would definitely come back to etrailer.com in the future!