Which Trailer Hitch For 2019 Honda Odyssey Gives Best Ground Clearance

Question

Question:

Which trailer hitch for 2019 Honda odyssey will provide the best ground clearance?

asked by: Sam

0

Expert Reply:

Per our test fits on a 2019 Honda Odyssey, there are two trailer hitches that have the best overall ground clearance, the Curt and etrailer, which are the following part numbers:

- etrailer Trailer Hitch Receiver # e98855

- Curt Trailer Hitch Receiver # C13370

Both hitches will be 11 inches from the ground to the bottom of the receiver, which is more than any other hitch. They both have 2 inch receivers, 3,500 lb towing and 525 lb tongue weight capacities. The only difference between these is actually the finish - the Curt has a glossier finish than the matte black finish of the etrailer hitch, so you can choose which you prefer. Or, if you don't feel strongly either way about the finish, then just go with the best price.

expert reply by: Kyle S

0

Answer 1

We have installed all three of those trailer hitches on a 2022 Honda Odyssey, and we found that two of them were tied for the best bumper clearance - 3 inches from hitch pin hole to edge of bumper (see photo below). Those two hitches are the Curt and…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Which Trailer Hitch For 2019 Honda Odyssey Gives Best Ground Clearance

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching