See what our Experts say about this CURT Heavy Duty Receiver Hitch

• Trailer Hitch Receiver Options For A 2024 Volvo S60 Plug-In Hybrid
  Hey Paul, There most likely is something in the way that prevents the installation of a trailer hitch on the S models and manufacturers haven't found a workaround yet. That pretty much leaves you with only weld-on adjustable-fit trailer hitches, which would require a bit of DIY to fit. You'll need to measure down from the frame rails to the see how large of the drop you'll need for the receiver tube to stick out from the rear fascia. We offer the following drop sizes: Draw-Tite 7" Drop...
  view full answer...
• Availability Of Front Hitch For 2022 Ram 4500 Diesel
  Hello Jerry, thanks for reaching out. At this time we offer only two front hitches for the 2022 Ram 4500, the Curt # C73ZV and Draw-Tite # DT36MR. I am sorry to say these hitches will not fit the Diesel model, and there is nothing available that does. The only option would be to take a universal multi-fit hitch like the Curt Class V Universal Weld-on Receiver # 15902 to a welder and have them fabricate something to fit. What are you wanting to use the front hitch for?
  view full answer...
• Front Mount Hitch Option For 2004 Nissan Xterra
  Hello Geoff, thanks for getting in touch. You are correct that there is no custom fit front hitch for the 2004 Nissan Xterra. I do have an option for you, but we do not have our custom fit hitches classified by the bolt hole spacing. So, there is no way to look up which hitches fit this specification short of going and physically measuring every hitch we offer which is not possible. Even if there is a hitch that meets that spec, there is no guarantee of fitment. A universal hitch will be...
  view full answer...
• Front And Rear Trailer Hitch Options For A 2024 Mercedes-Benz Sprinter 2500 Passenger Van
  Hello Brad, thanks for reaching out. The Draw-Tite # 75601 that you mentioned will fit a 2024 Sprinter 2500 with the 170" wheelbase. Please note that this hitch will not fit models with 30-3/8" wide frame when measured outside to outside. The frame width is the only real stipulation for fitment so please do measure and confirm this. As long as your frame is not 30-3/8" wide this hitch will be a great option for carrying a 4 bike rack on the rear of your van, It has a 500 lb tongue weight...
  view full answer...
• Receiver Hitch for 2019 Kia Niro PHEV
  Hey Kim! No, the Curt Trailer Hitch Receiver # C12171 will not fit your 2019 Kia Niro PHEV. This model is only confirmed to fit the standard gas/hybrid Niro, but not the PHEV. Unfortunately, there is not a custom fit trailer hitch for your PHEV Niro, so in order to tow or haul with your Niro, you will need to measure for a universal hitch on your vehicle, and then have it welded on. Your best option would be a universal weld-on hitch. You'll need to measure the width of the frame on...
  view full answer...
• Trailer Hitch Receiver Options For A 2025 Ford E-350 Cutaway Van
  Hey Jim, I drew up a little diagram of the Blue Ox Trailer Hitch Receiver # BLU75UR's dimensions so you can see if this would be a fit. It's not listed as a fit for your E-series cutaway chassis but the F and E-series can some times be interchangeable. It is listed to fit the following models: 2017 - 2025 Ford F-250 Super Duty 2017 - 2025 Ford F-350 Super Duty 2017 - 2025 Ford F-450 Super Duty Pickup There isn't a custom-fit option confirmed to fit so if this doesn't your next option...
  view full answer...
• Front Mounted Trailer Hitch Receiver Options For A 2019 Nissan Titan Pro 4x
  Hi Kevin, There unfortunately isn't a custom-fit front trailer hitch receiver for your 2019 Nissan Titan Pro 4x so you'd have to go with a universal-fit weld-on trailer hitch like I have listed below. These will all come with a specific drop so you'll want to measure from the frame down to see what size drop you'll need in order to clear the front fascia. These will fit an 18" to 44" wide frame width and any excess can just be trimmed off of the crosstube. Draw-Tite 7" Drop # 41990-07 16"...
  view full answer...
• Is There A Front-Mounted Trailer Hitch Receiver For A 2021 Ford Ranger
  Hey Charles, There are no custom-fit front-mounted trailer hitch receivers available for a 2021 Ford Ranger but you can still go with a weld-on adjustable-fit hitch. You'll just need to measure the distance from the frame down to the space between the grill and bumper. We offer the follow drop sizes: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR
  view full answer...
• Can A Front Hitch Be Added To A 1999 GMC Classic Sierra 3500 With A Cattle Guard?
  Hey Mike, thanks for reaching out. I'll start by saying this, at this time we do not offer a custom fit front hitch for the 1999 GMC Classic Sierra 3500. The only way to equip that truck with a front hitch would be to take a universal hitch like part # 15902 to a fabricator and have them chop it up to fit in whatever way they can. That said, in most cases, front hitches are not compatible with cattle guards or grille guards since they usually mount in the same location. Since you'd be...
  view full answer...
• Front-Mounted Trailer Hitch Options For A 2006 Ram 1500
  Hi Brad, Yes, the Draw-Tite # 65033 sits much lower to clear the air dam, while the Curt Front Mount Trailer Hitch Receiver # 31320 sits higher, requiring you to trim the air dam. These both have a 5,000lb capacity so you should definitely make sure your trailer is under that. If it isn't then you should go with an adjustable-fit weld-on hitch instead to ensure you have the capacity to handle the trailer. You can measure the frame width and measure down to where you have space for the...
  view full answer...
  
• Can A Hitch Extender Be Used With A Front Mount Trailer Hitch To Park A Travel Trailer
  Hi Don, Hitch extenders place a lot of stress on the hitch because you're leveraging the weight further out so using one typically drops the capacity by 50% when towing. You'd be doing it in a parking lot situation where you wouldn't really be traveling much just more so maneuvering around so realistically that shouldn't affect you but depending on how much weight you're leveraging there could be a breaking point, we just wouldn't be able to know exactly what that point is. The Curt...
  view full answer...
• Trailer Hitch Receiver Options For A 2024 Fiat 500e
  Hey Jack, There unfortunately isn't a custom-fit option available for the 2024 Fiat 500e yet so the only other option currently would be to go with an adjustable-fit weld-on trailer hitch. To pick out the right one you'll need to measure down from your frame to find how of a drop you'll need for the receiver tube to clear the rear fascia. We offer the following drop sizes: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2"...
  view full answer...
• Custom Hitch for a 2023 Honda CR-V
  Thanks for reaching out, Rick. I wouldn't be able to encourage modifying the B&W trailer hitch part # BW97BR. It wouldn't be safe or functional to do so. What are you using the hitch for? Do you have concerns with ground clearance with a bike rack or other hitch mounted accessory? Let me know and I can look into alternate solution for you. Another option you could you could do would be to get a universal hitch like part # 15902 and take it to a local fab shop and have them retro fit...
  view full answer...
• Front-Mounted Trailer Hitch Options For A 2024 Toyota Tacoma
  Hi Barry, There unfortunately isn't a custom-fit front-mounted hitch for a 2024 Toyota Tacoma at this time so you'll have to go with a weld-on adjustable-fit hitch instead. This will require you to measure the distance between the frame rails and the also determine how much of a drop you'll need from the frame rails for the receiver tube to come out from the fascia. We offer the following drop sizes: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865"...
  view full answer...
• Trailer Hitch Option For Freightliner School Bus With 33 Inch Frame
  Hi Ryne, We can get your Freightliner bus a hitch, but what you'll need is a universal weld-on option, with the right one depending on the amount of drop you need from the frame. Both are Class V Curt hitches that have a 15,000 lb capacity, so more than enough for your needs; here are the options: - 3" Drop From Frame: Curt Class V Universal Weld-on Receiver Hitch # 15901 - 10.865" Drop From Frame: Curt Class V Universal Weld-on Receiver Hitch # 15902 Each is designed to weld onto frames...
  view full answer...
• Trailer Hitch Options For A 2018 Thor Outlaw 37BG On A Ford F-53 Chassis
  Hey Steve, For a 2017 F-53 chassis we currently only have weld-on universal fit style trailer hitches available. Each of these would fit 18" to 44" wide trailer frames and would come with brackets that can give you a different drop depending on your needs. You'll want to measure down from the frame to determine where you want the receiver tube to come out to avoid hitting the fascia. We offer the following drop sizes: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9"...
  view full answer...
• Trailer Hitch Options For A 2017 Thor Freedom Elite 22FE Class C Motorhome
  Hi Cass, There isn't a custom-fit trailer hitch confirmed to fit your E-450 chassis, but we do offer weld-on adjustable-fit trailer hitches that can be used instead. The deciding factor here on what is going to be the best fit is going to depend on how low from the frame the receiver tube will need to be to clear the rear bumper/body of the trailer and any other components that could potentially be in the way. We offer the following drop sizes: Draw-Tite 7" Drop # 41990-07 16" Drop #...
  view full answer...
• Can A Blue Ox Baseplate And Curt Front-Mounted Trailer Hitch Both Be Installed On A 2022 Ram 1500
  Hey Mike, Both the Blue Ox Base Plate Kit # BLU99FR and Curt Front Mount Trailer Hitch Receiver # C87FR would be fighting for the same space on the frame rail where the tow hooks sit so they would not be compatible together. There isn't another custom-fit hitch but you could go with a weld-on adjustable-fit trailer hitch and work with a local fabricator shop to get it sitting right and welded to the frame rails. We offer a few different drop lengths that you can use as a rise or drop...
  view full answer...
• Trailer Hitch Options For A 1979 Chevy Caprice Wagon
  Hi Carston, The Curt Trailer Hitch Receiver # C12009 is listed as a fit for sedan models only. It looks like we unfortunately don't have a custom-fit option for a wagon model so you'd have to go with a weld-on option instead. To do this you would need to measure your frame width and see how much of a drop you'd need from the frame to clear the rear fascia. We offer the following weld-on options, which will all fit an 18" to 44" wide frame width and any excess can just be trimmed off of...
  view full answer...
• Trailer Hitch Receiver Options For A 1999 Saab 9-3
  Hey Bruce, We unfortunately do not offer a custom fit hitch for a 1999 SAAB 9-3. You would have to go with a weld-on hitch and figure out the correct drop to clear the rear fascia. We don't have any schematics for this so I recommend reaching out to a local fabrication/welding company to determine the best fit/mounting points. We offer the following weld-on hitches: Draw-Tite 7" Drop # 41990-07 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903
  view full answer...
• Front And Rear Mounted Trailer Hitches Needed For A 1991 Born Free Motorhome On A Ford E-350 Chassis
  Hey Dale, There unfortunately aren't any trailer hitches confirmed to fit so you would need to go with a weld-on, adjustable-fit trailer hitch and measure from the frame down to the bottom of the fascia to determine how much of a drop you need to clear it. This is going to be the case for both the front and rear hitch. We offer the following drop sizes: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18"...
  view full answer...
• Recommended Front Mounted Trailer Hitch For A 2021 Ford F-150 Lightning
  Hey Mark, There unfortunately isn't a custom-fit confirmed at this time for a 2021 Ford F-150 Lightning so the only option available would be a universal-fit weld-on receiver hitch. To figure out the right one you'll need to measure from the frame rails down to where you want the receiver tube to stick out. Hopefully nothing is in the way and you can have the receiver tube stick out through the slot in the front fascia. We offer the following drop lengths: Draw-Tite 7" Drop # 41990-07 16"...
  view full answer...
• Front Mounted Hitch Options For A 2019 GMC Quigley 4x4 Van
  Hey Matthew, There isn't a custom-fit front mounted trailer hitch for your 2019 GMC Quigley 4x4 Van so the only option would be a weld-on adjustable-fit trailer hitch. You'll need to measure from the frame to the height you want the receiver tube to sit at in order to find the right rise/drop. We offer the following rise/drops: Draw-Tite 7" Drop # 41990-07 16" Drop # 41990-16 Curt 3" Drop # 15901 9" Drop # C47CR 10.865" Drop # 15902 11-1/2" Drop # 15903 18" Drop # C99CR These will...
  view full answer...
• Universal Or Custom Fit Front Mount Trailer Hitch Receiver For 1996 Ford Bronco
  I may have another option but the Curt Front Mount Trailer Hitch Receiver # 31026 is only a confirmed fit 1992-1996 Ford F-150 and will not fit on your 1996 Bronco due to the differences in the frame and bumpers. Since there is no custom fit front mount trailer hitch receiver for your Bronco, the only option would be to have a universal trailer hitch receiver like the Curt Class V Universal Weld-on Receiver Hitch and Brackets # 15902 fabricated to fit the front of your Bronco. I included...
  view full answer...

Do you have a question about this Heavy Duty Receiver Hitch?