You plan every trip carefully, but water and waste don't always follow your schedule. With percentage-based readings, alarms, and Bluetooth smartphone access, this monitor ensures you'll always know when its time to fill, dump, or refuel.
Traveling in your RV should feel freeing, not stressful. Nothing disrupts a trip faster than running out of fresh water or discovering a tank is full at the wrong time. The SeeLeveL system removes the guesswork. Instead of vague 1/3 or 2/3 full readings, you see exact percentages for each tank. Custom alarms let you know the moment attention is needed, so you stay in control before small problems turn into big ones.
Convenience matters on the road. Bluetooth compatibility lets you check tank levels right from your phone, and a built-in switch gives you one-touch control of your water pump. Add in battery voltage monitoring and you have a complete picture of your RV's resources from a single display.
The system supports multiple fresh, gray, black, and LPG tanks, with the option to repurpose the LPG input for a third gray tank if needed. Installation is straightforward using SeeLeveL Senders (sold separately) mounted outside your tanks, and accuracy is dependable from day one.
From bright desert sun to daily vibration, this monitor is designed for RV life. The LED brightness adjusts for visibility anywhere, and you can add multiple monitors to check levels inside or from the service bay. If you're dry camping far from hookups or cruising cross-country, this system gives you total control over your resources.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this SeeLevel RV holding tank monitor for seven tanks with the water pump switch and Bluetooth capability. Now, this is gonna allow advanced tank monitoring for your advanced RV. It is compatible with the multiplex RVC systems so that you can get improved readings at your primary control panel. This will hardwire to SeeLevel sensors that are mounted on the outside of your tanks. Those sensors we do sell separate on our website.
This monitor's gonna display the levels of your RVs fresh, gray, and black tanks. At just the push of a button right here where the display is, it'll show zero to 100%. Now this can monitor two fresh, two black, and three gray water tank levels. It will also, the button here that says battery, it'll detect battery voltage and as we mentioned also, activates the water pump with the integrated switch. And over here you can see the LPG button.
This display can use an existing LPG electrical center to show the LPG level. This display does have Bluetooth wireless technology, which allows you to check your tank levels, your battery voltage, and LPG tank levels on any compatible smartphone or tablet device with a free downloadable app available on Google Play or iOS app stores. As we mentioned, it's compatible with RVC multiplex systems to display the tank levels on your center console. This will check status and signal strength of the sensors using a diagnostic mode helps improve accuracy during your install. And it will alert you of any errors or calibration issues with various display codes.
And those codes will be explained with suggested solutions in your user manual. Now, this is designed to work with multiple monitors so you can check tank status from the service bay and inside your RV. This does install very easily. You'll just cut a hole for the recessed mount monitor and then screw it into place. Now the hardware's not included, but if you notice, it does include the pigtail that's needed for installation, plugs in the back there, and existing wiring from your old tank monitor system can be used to ease the install.
Again, application is for seven holding tank setups with multiplex systems. Operating temperature is 32 degrees Fahrenheit up to 140 degrees Fahrenheit, and operating voltage range 11 volts to 16 volts. Last thing is just the measurement of this monitor. Width of it is four inches wide. The height bottom to the top two and thirteen sixteenth inches tall, and the total depth from the front to the very back here is three quarters of an inch. But that's gonna do it for a look at the SeeLevel RV holding tank monitor for seven tanks with a water pump switch and Bluetooth capabilities.
Do you have a question about this Smart RV?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.