To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Rated to handle up to 30,000 lbs gross towing weight and 7,500 lbs vertical load, this underbed hitch is made for serious towing. The single-piece, machined ball socket gives you a rugged, solid connection that stays tight when pulling heavy livestock trailers, equipment haulers, or large fifth wheels. The square ball base prevents rotation inside the hitch during hookup so everything lines up cleanly and stays stable under load.
When the trailer’s unhooked, pull the handle, flip the 2-5/16" ball upside down, and drop it back into the hitch for storage. The ball sits flush below the bed surface so your truck bed is wide open and ready for gear or materials. This setup lets you switch between towing and hauling in minutes without a hitch taking up space in the bed.
The operating handle sits at the rear driver’s-side wheel well so you can lock or release the hitch without climbing into the truck bed. A 5/8" thick spring-loaded steel pin slides through the ball to secure it in place for towing. The square ball base keeps it from turning in the socket, and when stowed, its “corners only” fit helps keep dirt and grime from packing inside. Built-in spring-loaded safety-chain loops are easy to reach and ready when you need them.
The included custom mounting kit bolts to existing holes in the truck frame for a clean installation—no welding or bed removal needed. You’ll just need to cut a 4" diameter hole for the hitch ball and drill holes for the safety-chain loops. Once installed, you’ve got a heavy-duty underbed hitch that’s ready for gooseneck towing and can be adapted for fifth-wheel towing with B&W accessories (sold separately).
Ratings & Reviews
Great for gooseneck addition. My truck had the rail system installed by the previous owner and it made my bed hard to organize things as well as being in the way for loading supplies. Getting it out and putting in a turnover ball has made my bed more useable.
I don’t have a lifting device in my carport, so I used a ratchet strap around the pin and a four wheeler ramp to lift it up and hold it in place during the bolting portion of the install.
On. Another note, there is a hole template in the box for where you need to drill the holes for the chain tie down points. It was upside down in my box so I didn’t see it until after I was done. So I drilled up from the bottom with small bits to get the holes where I needed them. Then used larger bits from the top down.
Also you do need to remove the spare tire(not optional). I backed my truck up on a set of ramps and am glad that I did for the extra room to sit up and work under the truck. Not always on my back. I did find that bending the heat shield out of the way helped, but if you do that, make sure to remember to bend it back into place when you’re done.
The hitch is beefy and seem to be very strong. My guess is the truck frame will give before the hitch. Great quality. I very happy! I'm an above average backyard mechanic and found the installation doable, but a little of a challenge. Differently need a help. My wife was a big help. I use a 2X4 across my bed and a ratchet strap to lift and hold the center section in to position. I also had to reposition my exhaust pipe where it goes over the differential to get some clearance. Also, I had to drill out one of the square holes in the tailpipe L bracket to receive the factory bolt.
etrailer provided all the information I needed to choose this B&W gooseneck hitch setup for my truck. The parts I ordered got to me quickly and well packed, it fit great with great instructions included.
Perfect fit, I wouldnt go as far as to say it was an easy install, qbout 4 hours on 2025 f350. But definitely better then the 1000 bucks the dealer wanted to charge me to install. Then the 1200 bucks he wanted for exact same hitch... Well worth the savings, suck it up do yourself.
I was impressed how well all the pieces fit as well as the detailed instructions that were fairly easy to follow. I followed it step-by-step and although it took me a couple hours, I was very pleased with the finish product.
This is a great hitch and has performed well over the past year. The install was somewhat simple, my only complaint is that the release handle would be better on the passenger side of my 2021 Ram 2500 to eliminate being so close to all the brake lines.
Overall this is a solid product and I am happy with it.
This kit has been great for my Super Duty. etrailer’s installation was perfect and I couldn't be happier with the hitch and service.
My gooseneck hitch and companion fifth wheel arrived early. Install was straightforward. Absolutely thrilled with the way it turned out!!!
Still works great a year later! Ball still turns over, even got some use with a 5th wheel companion thing and works awesome!
Extremely well made and very beefy. Installation video made the process very smooth. Only install issue related to the handle in the fender well. My truck has an inverter and the heavy cable going to the 110 outlet in the bed ran right over the area the handle is supposed to go when it is to be moved to the left or front of the truck. Once I figured out the problem I was able to zip tie the cable out of the way just enough to free up the handle to release the turnover ball. Have towed a new 5th wheel using a gooseneck adapter and it worked perfectly. Very pleased with the turnover ball system.
This is a very stout, well-engineered and manufactured hitch. It is made in USA,the build quality is impeccable and I know for sure it is stronger than the vehicle frame it was installed on. I got the kit #1067 for my 2005 silverado 2500. It fit fine except the under-box hitch frame was slightly too thick to fit in the space under the box floor so I had to unbolt and lift the box slightly. The instructions have a youtube video supplement, which is nice. However, they didn't always specify how the bolts and washers should be oriented so I had to redo a few to get the pattern that fit well and used up all the washers.
Really fast delivery
Had this hitch on my last truck and loved it
Thanks
Haven't installed yet,but seems very heavy duty.
It's been great. Not a single hitch, no pun intended. I was able to figure out ways to install this thing by myself even on the parts where the instructions said to have 2 people. Been towing with this thing all year, 24 foot tilt deck gooseneck, no problem. 100% recommend.
Perfectly fit
Great product and service. Quick delivery and instructions were pretty easy to follow.
Well, the hitch itself is fantastic. What more can you say about a great product great company love it. Installation made easy as possible because of E Trailer their support has been fantastic between me putting it in and even experience a slight issue where my box was opened and I was missing a bolt. Oh by the way, if you are installing one of these, the measurement you need is in the instructions even if it’s hard to read do not make my mistake in ChatGPT go ahead go onto E Trailer they actually have a really good video and you’ll see that you hook onto to the end of your trailer. Well, excuse me the end of your truck bed and pull from there. ChatGPT screwed me, but Trailer did not.
Do you have a question about this Gooseneck Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Christopher H.
10/1/2026
Really appreciate your feedback Dennis! Glad to hear the installation video was helpful. What are your plans for the gooseneck?