Will B&W Turnoverball Fit 2024 Toyota Tundra Platinum With Factory Air Bags

Question

Question:

I have a 24 tundra platinum with factory air bags. Will this hitch work with these air bags?

asked by: Brad

0

Expert Reply:

Hi Brad; I reached out to B&W and they said factory air bags won't be a problem. You can install the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BW96FR on your 2024 Toyota Tundra Platinum.

expert reply by: Robin H

0

Brad

10/10/2024

Awesome. Thanks

Answer 1

The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL24JQ installs just outside the suspension springs on your 2022 Toyota Tundra as you can see in the attached photo.

view full answer...

Answer 2

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 3

Hi Cory, There is a B&W Companion 5th wheel hitch that will work with your 2024 Toyota Tundra with a composite bed, though it is a different part number than the one you asked about, as that one is for Chevy/GMC trucks with a puck system.…

view full answer...

Answer 4

Newer Tundra trucks like their 2024 Toyota Tundra Limited don't have rail kits available. I believe it has something to do with the composite beds which is why you don't see anything after 2021. The only solution I can offer is to sell the…

view full answer...

Answer 5

Yes we do have a B and W Turnoverball Gooseneck Hitch that fits your Toyota Tundra with the part #BW96FR. You are right they are considered to be the best hitches around because of how well made they are, how easy to use they are, and they hold up…

view full answer...

Answer 6

Yes, I recommend the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BW96FR for your 2022 Toyota Tundra. This hitch is made in the USA and comes with B&W's lifetime warranty. The hitch ball easily flips inside the hitch for a clean bed…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Will B&W Turnoverball Fit 2024 Toyota Tundra Platinum With Factory Air Bags

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching