Difference Between 2004 Chevy Silverado 2500 Curt and Draw-Tite Front Hitches  

For your 2004 Chevy Silverado 3500HD the Draw Tite hitch part #65028 is a confirmed fit. We checked with Draw Tite to confirm this. I also attached a picture of the hitch installed on a vehicle that has the factory skid plate you referenced.

The Draw-Tite front mount hitch #65028 and the Curt Front Hitch #31108 are very similar, but they are not the same hitch. This was not intentional, the manufacturers just so happened to come up with very similar designs for the hitch coincidentally.…

Both the Curt Front Mount Trailer Hitch item #31108 and the Draw-Tite item #65028 are confirmed to fit the 2006 Chevy Silverado 2500's. I took a look at the installation instructions and capacities and they are as close to identical as you can…

You'd want to install a front hitch on your 2006 Chevy Silverado 2500HD like the Draw Tite #65028 which is confirmed as a fit so that you can mount the winch #SW1517200 to a hitch mount like the #C31010.

I spoke with my contacts at Curt and Draw-Tite regarding the front mounted trailer hitches you referenced, Curt #31108 and Draw Tite #65028 which are confirmed fits for your 2005 Chevy 2500HD. They both said that you will be able to retain the tow…

For your 2001 Chevy Suburban the 4WD or the 2WD will not matter for the front hitch. The choice for your vehicle will be if it is the 1500 series or the 2500 series Suburban. If you have the 2001 Chevy Suburban 1500, the Curt Front Hitch, #31302 will…

Due to the design of the front of your 2005 Chevy Silverado 3500 the only place you'll be able to have a front hitch opening is below the front fascia like where the Curt #31108 installs. This would be best option we have, but if you really…

The 2007 Chevy Silverado Classic 2500 requires a different front mount trailer hitch. From Curt, you can use #31108. I spoke with my contact at Curt and from the bottom of the frame rail to the bottom of the receiver on the hitch once installed is 5…

The tow hooks can stay. The hardware that is used to hold the tow hooks in place will be replaced by the hardware that comes with the front mount hitch. I have included a link to the instructions for you to reference.

Unfortunately, the frame with isn't the only consideration. According to Draw-Tite, the differences in the way the front bumper, fascia and grill are situated in regard to the front of the frame members on a 2007 Classic versus a 2007 New Body…

We offer two front-mount hitches for your 2002 Chevy Silverado 2500HD and both can be seen on the link at right. The installation instructions for both, which are also linked, indicate that in the case of both the Curt hitch #31108 and the Draw-Tite…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…