Front Hitch Option for 2005 Chevy Silverado 3500  

The only real difference between the Draw-Tite #65052 and Curt #C31012 is the style in which they bolt to the frame. The Draw-Tite is going to have a bolt on each frame rail and one on the crossmember, whereas the Curt is going to have three bolts on…

The only real difference between the Curt #31108 and Draw-Tite #65028 front hitches for your 2004 Chevy Silverado 2500 is that we've found the Curt hitches to traditionally have a little thicker of a powder coat which means they are a little…

Unfortunately, the frame with isn't the only consideration. According to Draw-Tite, the differences in the way the front bumper, fascia and grill are situated in regard to the front of the frame members on a 2007 Classic versus a 2007 New Body…

The 2007 Chevy Silverado Classic 2500 requires a different front mount trailer hitch. From Curt, you can use #31108. I spoke with my contact at Curt and from the bottom of the frame rail to the bottom of the receiver on the hitch once installed is 5…

The Draw-Tite front mount hitch #65028 and the Curt Front Hitch #31108 are very similar, but they are not the same hitch. This was not intentional, the manufacturers just so happened to come up with very similar designs for the hitch coincidentally.…

We offer two front-mount hitches for your 2002 Chevy Silverado 2500HD and both can be seen on the link at right. The installation instructions for both, which are also linked, indicate that in the case of both the Curt hitch #31108 and the Draw-Tite…

For your 2004 Chevy Silverado 3500HD the Draw Tite hitch part #65028 is a confirmed fit. We checked with Draw Tite to confirm this. I also attached a picture of the hitch installed on a vehicle that has the factory skid plate you referenced.

The tow hooks can stay. The hardware that is used to hold the tow hooks in place will be replaced by the hardware that comes with the front mount hitch. I have included a link to the instructions for you to reference.

We have two front mounted hitches that will fit your 2003 Chevrolet Silverado 3500 truck. Of the two, I recommend the Draw-Tite Front Mount Hitch, #65028. The Draw-Tite hitch is custom-fit and will install on the front of your Silverado with no…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.