Price: $51.21

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118534

lowest price pledge


Our Price: $51.21

This item qualifies for Free Shipping

Select Ground or 3 Day Shipping for delivery before Christmas


In Stock
zoom in icon
zoom out icon
pop out icon replay 360 icon
horizontal rotate icon

  • Custom Fit
  • Trailer Hitch Wiring
  • Tekonsha
  • 4 Flat
  • Powered Converter
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system. Call 800-298-8924 to order Tekonsha custom fit vehicle wiring part number 118534 or order online at Free expert support on all Tekonsha products. Guaranteed Lowest Price and Fastest Shipping for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.

Tekonsha Custom Fit Vehicle Wiring - 118534

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.


  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily
    • Locate connection points behind tail lights
    • Plug in T-connector
    • Run hot lead to car battery
  • Includes ModuLite power module that connects directly to battery to avoid overloading vehicle's electrical system
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


  • Maximum amperage:
    • Stop/turn lights: 4.2 amps per circuit
    • Tail lights: 7.5 amps per circuit
  • 1-Year limited warranty


This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.

T-One Connection Location Points Behind Tail Lights

Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.

Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.

It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.

ModuLite Power Module

A ModuLite power module is built into this T-One connector. With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.

118534 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite

118534 Installation InstructionsInstallation Details 118534 Installation instructions

This Product Fits The Following Vehicles

2012 - 2014 Dodge CV

2012 - 2013 Dodge CV

2012 - 2015 Ram CV

2012 - 2013 Ram CV

2011 - 2017 Dodge Grand Caravan

2011 - 2017 Dodge Grand Caravan

2011 - 2016 Chrysler Town and Country

2011 - 2016 Chrysler Town and Country

2014 - 2014 Dodge CV without factory trailer connector

2014 - 2015 Ram CV without factory trailer connector

Related Products

Customers Who Purchased This Custom Fit Vehicle Wiring Also Bought...

Video of T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Tow Ready Custom Fit Vehicle Wiring 118534 Review

Today we're going to review part number 118534. This is the Tow Ready T-One Vehicle Wiring Harness with the 4-Way Flat Trailer Connector. This is a custom fit part number. It is designed to fit the Chrysler Town and Country and the Dodge Grand Caravan starting in 2011. What I would recommend for you to do is go to our website, use our fit guide, put in your year and model vehicle and it'll show you that this part will work for your application. Now this does provide a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights. It does connect very quickly and easily, it uses these plug in T-connectors and basically what you do is just locate your connection points behind the tail lights, plug them in, you run a power wire for the ModuLite module, a ground wire and then you'd be ready to go.

Now it does include this ModuLite right here. It's a powered module that connects directly to your battery and avoids overloading your vehicle's electrical system. Now the length of wire that the 4-way is on that runs out the back, it is a 16-gauge bonded wire and it actually on the 4-way itself, you can see it has this integrated dust cap which is nice when you're not using it. You just put the cap on in there and it will protect your terminals from any damage or from the elements. A few specs on this harness. The maximum amperage for the stop and turn light circuit is 4.2 amps per circuit. On the tail lights it's 7.5 amps per circuit.

Now this part comes with everything showing here. It comes with the wiring harness, it comes with some cable ties to take up any slack in the wiring, a couple of buck connectors, an eyelet connector, a grounding screw, a 15 amp fuse, an inline fuse holder, a length of wire and some nice detailed instructions that show you where the connection points are and how to connect all these. Quickly here, I'm just going to show you how this does connect. What you would do is go to the back of your vehicle and then what you'll do is go behind the tail lights on both the driver's and passenger's side and what you'll do is, let's say we'll start on the driver's side. You'll take this T-connector that has the yellow wire in it and that's for your driver side. What you'll do is go behind the tail lights, unplug them and these will tee 00:02:08 into that harness and then what you'll do is go and take this length of green wire that has the extra length of wire, that's for the passenger side.

You'll run this over to the passenger side and do the same thing, unplug behind the tail light, plug this in, once the T-connectors are all plugged in, then what you'll want to do is you'll have this white wire coming out of the ModuLite here, it has an eyelet on it. This needs to get connected to a good, clean ground. If there's a screw on your car that you can connect this to to get a good, clean ground, you can do that. If not, they include this grounding screw that you can install your own ground. Then the other wire is this larger black wire.

Now that's your power wire. This has got to the battery in your vehicle. That's why they give you this extra length of wire. What you'll want to do is take one of the butt connectors, put it on here, attach one end of this wire on that and then run this length of wire all the way up to the front of your vehicle to where your battery is. Once you get up there, you'll take the other end, take the other butt connector, put it on there and you don't want to connect it to the battery yet. What you'll want to is take this inline fuse holder and go ahead and connect that to this wire. Then what you'll do is on the other end of this inline fuse holder, you'll take the eyelet connector, install that and then this is what will connect to the positive post of your battery. Once that's connected, just pop this open and they include a 15 amp fuse. What you'll do is go ahead and install that in the fuse holder. There you go. Put your cap over it and then you'd be all ready to go. Like I said, you'll have some extra cable ties here if you got some length of wire right this far who needs to be tied up, you can use the cable ties. That should do it for the review on part number 118534. This is the Tow Ready T-One Vehicle Wiring Harness with the 4-Way Flat Trailer Connector. .

Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118534

Average Customer Rating:  4.7 out of 5 stars   (316 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.

- 118534

by: TDS05/27/2013

Installation of this wasn't too bad. The instructions are pretty good and there are some decent diagrams. However, I've got say that I was surprised and disappointed that I had to run a line from the tail light all the way to the front of the vehicle directly to the battery. I've done of these before on an older model Grand Caravan and it was all installed in the rear. However, it seems like all of the wiring kits for this model are like this, so I assume there's a good reason for it. Anyway, I've got two bits to offer. First, I don't believe that it's good practice to have a single wire exposed to the elements, like the road, debris, heat, etc. Because of this, I bought some of the split plastic loom stuff that's very common. I used 1/4" split corrugated tubing, part # 7840K81 from McMaster-Carr. It's currently $1.94 for a 5' length, so it's pretty cheap. I bought (4) 5' lengths and used it all. FYI, I already had the line run and put the tubing on after. If you do it right, it's not bad to do, but obviously you'll have to cut any zip ties if you already did that. Second, I didn't run the harness between the tail lights on the outside, I ran it on the inside. If you feel around in the driver's side tail light cavity with one hand and the inside of the jack cavity from the back, you'll feel a "bulkhead" kind of a barrier part that you can push out. Then you can run the harness on the inside. The black plastic piece that runs on the top of the door jam (above the bumper) just pops out, as do the clips that hold the fabric down. Run your harness under that fabric. Pull the panel aside a bit on the passenger side and look for the same "barrier" part in the tail light cavity and run your connector through that way. I *don't* have a lot of interior experience in cars and I thought this was pretty easy. Good luck..... 82097

- 118534

by: Rich03/18/2014

Product arrived promptly, and as described. Instruction sheet has an error, as it shows the Module being mounted in the tail light visible area on my 2013 Chry T&C . The green wire is too short Follow the VIDEO (!) , except, do not mount the module until you have the right hand tail light sockets done. (and leave handling length !) The GREEN Wire is too short to do that ! Had to remount the module down below the open area, about 6-8 inches lower in the cavity in order to plug in the sockets on the right side light. Also found vent flaps from the car jack area, so was able to feed the trailer socket and wire into the jack storage through this vent. Now the trailer plug is inside and only exposed when using a trailer by letting the door weather strip close on the wires. Used 3/8" flex cover (plastic conduit) from Home Depot so all wires are protected from the heavy winter snow undercarriage we get here up north. I think it is a very nice kit , and the wire ties included show the good thought that the manufacturer put into it. Too bad the green wire skimped on length about 6-8 inches 121126


Good Product, very satisfied. Well worth the time and cost. Would buy again if I get a new car

Rich - 03/18/2015


Yes, I found the same thing, the green wire is about 12 too short when installing on a 2013 Grand Caravan. Very annoying.

-- comment by: Joel H - 09/13/2015


- 118534

by: Dan D12/06/2013

I pulled the back panel, and loosened the side panels, plugged the harness in, and hooked up the ground and power wire. I checked with a test light and all circuits worked nicely so I reinstalled the side panels and closed the trunk. This is a NICE harness to hook up and it took me about 45 min to complete the job. Sorry no pictures of the inside of the trunk but most trunk pictures look the same anyway don't they… :-) I have two small utility trailers that I want to pull with my Jetta and I needed a powered unit to hook up the trailer lights. I did try to use a regular wiring splitter to the trailer lights but it just wouldn't work correctly, and it made warning lights come on in the dash. You know with LED lights on the car, and regular bulbs on the trailer they just don't mix together very well. This wiring harness is a good one and easy to hook up. 109451


What a great product. I hook up the trailer, plugin the wiring, check the lights, and head on down the road. It works perfect every time.

Dan D - 12/07/2014


- 118534

by: David L.05/10/2014

My hitch installation went well. The wiring kit installation, however, did not. The wire that goes from the left rear lamp to the right rear lamp was about 12" too short. The black wire that goes to the battery was about 6' too short. In trying to figure out what went wrong, and then making about 3 trips to the auto parts store, and then splicing in additional length of wires, I spent pretty much the whole day completing this project. My suspicion is that the wiring kit was a returned package. The plastic enclosure was taped closed and the black wire inside was not neatly wound, like a new wire would be - and like what was shown in the picture on the instruction sheet. If that is the case, I would like to recommend that you do not sell returned wiring kits unless they are completely inspected, including measuring the wires. The job is done, it just took alot longer than it should have and cost me a little more than it should have. 129954

- 118534

by: Jesse O.05/12/2014

Installation went great, made possible by etrailer's instructional video (search YouTube for "etrailer wiring 2013 town and country"). Without the video, installation would have been much more difficult as the written instructions that come with the wiring kit are not very good at all. Like is stated in the video, you will need some additional zip ties that are longer than the ones supplied in the kit. 130091


No problems!

Jesse O - 05/12/2015


- 118534

by: Donald11/14/2011

Design of the harness made it very simple to place in my vehicle. I am assuming that the need for a separate fused connection to the battery has provided the trailer circuit with a separate supply so that if a fault occurs, there will be no loading of the vehicle circuits. (Instructions do not discuss this situation.) Installation instructions were adequate, but video available on the web made it fool proof. Green wire from left to right assembly was a bit too short, but easily corrected with a 10" splice. Running the power wire up thru the space in the engine compartment required a bit of planning to miss any moving steering or drive components, but tiewraps made clearances proper. I haven't checked out the trailer lights yet, but the connection has not interfered with my vehicle wiring. If the trailer lights work I will consider this an outstanding product well worth the cost. 26924

- 118534

by: Dan S.05/21/2012

The product install videos for the wiring harness and the hitch are what convinced me to do it myself and SAVED ME over $350.00 from the price the dealer was quoting me. These videos are excellent and I had no trouble at all with the installation by carefully following the advice given on your online videos. Re: feedback on the green wire from driver's side taillight to passenger side taillight... I ran it first and reinstalled the passenger taillight back in place BEFORE I adhered the circuit module inside the driver's side taillight compartment to ensure that I had enough slack on the green wire (other reviews noted that they had to splice the green wire to make it long enough). Everything else I did exactly by your install videos and I'm on my way! Thanks for the huge savings $$$ Cha-Ching!!! 41118

- 118534

by: Rick G.03/18/2015

For my 2014 Chrysler T&C, I ordered the Curt trailer hitch with 118534 wiring harness with regular free shipping and received them the NEXT day. That is impressive and was unexpected. I installed the hitch with no difficulty, assisted by an hydraulic lift. The instructions were helpful and straight forward. I did have to release the 3rd muffler clamp for access. My only concern is the part/opening that receives the ball assembly, presses on the plastic bumper shell. The instructions do indicate some modifications (cut) may be required. I did not modify. This made pulling the taillights out (for the wiring harness) a little harder. Instructions for the wiring harness were ok. However, I found a U-tube instructional video (thru e-trailer) was most helpful. Many thanks. 179335

- 118534

by: James P04/19/2015

This product was shipped quickly and was easy to install. It works just as it should and I am very happy with it. The etrailer Youtube video of how to install this product on a 2012 Dodge Grandcaravan was dead on accurate. 186311


Still working great!!

James P - 04/18/2016


- 118534

by: Mark R.07/28/2014

The poor rating is not for the product by itself but as it relates to a particular vehicle. This wiring harness was purchased for a 2014 Dodge Grand Caravan. The package labeling stated it was for a 2011 vehicle. The 2011 caravan is smaller than the 2014. The green wire to the right side is too short. Yes – I read the other comments that said as much but, I thought I was “smarter than the average bear” and would be able to make it fit with proper placement of the module. It fit – just barely. It was so tight I thought the wires would pull out of the connectors so in the end I spliced in about 10 inches. E-trailer really needs to get/sell an updated version of this instead of selling a 2011 version for the newer vehicles. 143183

- 118534

by: Steve S.02/16/2015

First, I want to compliment for their excellent customer service. I received notification that my order had been received and was shipped, along with tracking, shortly after placing my order. I received the item in a reasonable amount of time. The item itself is exactly what I needed, at a fair price, with reasonable shipping fees. I have already installed the trailer light wiring kit using the directions provided and the "you tube" video. The installation was relatively easy, and the kit included everything required to complete the job. Everything has been tested and works perfectly. Overall, GREAT job and I will certainly keep in mind for future purchases. 175029

- 118534

by: Matt H.05/06/2013

I liked being able to watch the video to know what I was getting into. Laying on my back under the vehicle was a bit more difficult than the video. I added some loam (covering) to the green wire as I routed it around the bumper up into the tail light area. Looked like a good pinch point/rub area. I added 10" of wire to the green cross over wire to improve the routing through the rear bumper. Definitely need more zip ties in the kit. They are cheap. I also added 12" of loam to the 4 wires as I routed over the hitch and rest the connector in the bumper cover. Makes it more rigid so it doesn't fall down. Overall I am satified with the final product and would do it again. 79152

- 118534

by: Edwin W.09/27/2016

Purchased trailer hitch and wiring harness for my 2016 Chrysler Town and Country mini van. The installation video was "spot on" and allowed the installation to be a simple task. The installation allowed me to plan the installation. In less than 3 hours the job was complete. It only took about 1 hour to install the hitch after watching the detailed installation video. The key was having all tools available based on video. I am a first time trailer hitch installation. I was amazed at the product quality and price. I am a first time etrailer customer and "hitched" on being a return customer. Etrailer is an excellent company with excellent customer service! Thanks Heather H! 300859

- 118534

by: Bart S06/24/2013

I installed this converter on our 2009 Jetta this past weekend. I chose a Bosal swab neck hitch rather than an receiver style hitch so I had the trim off of both sides of the trunk as I removed the rear bumper; this made this a quick install indeed. Because I didn't want to run the power wire underneath the car as per instructions, I chose to power the converter from the rear of the 12V accessory jack in the trunk; this works quite well. I will modify the power source so this power source is always on rather than turning on w/ the key but it works for now. This is a really simply product to install w/ this change. It worked perfectly the first time we powered it up. 85860

- 118534

by: Donn F12/22/2014

I found it easy to install behind the tail lites. Three problems though... 1. The green wire that goes to the passenger side tail light was about 4 inches too short. No matter how i tried to route the wire it was just too short. I soldered a 6" jumper in there and the problem was solved. 2. Running the black wire (it should be red by the way) to the positive (+) terminal of the battery was a real pain in the ass. Figure out a way to tap in to 12 volts another way please. 3. There was about 10 zip ties in the bag. I used all of them and about 25 more of my own. I am glad i had a bunch in my shop. The end result was it worked the first time. 166518

- 118534

by: Howard M.04/08/2013

This is the third Grand Caravan on which I have installed a trailer hitch and wiring harness (02, 05 and 12). The 02 and 05 hitches were purchased from Chrysler and the 12 from you folks. This is the first time I had to run a wire from the tail light to the battery. I watched the video and I knew what I was getting into, but I never thought it would be so much trouble to install that wire. I don't know how they do it, but all I had to do was plug in the "T" connectors. Your price really attracted me, but in retrospect, I think I would rather have paid a little more for the harness. The hitch went right on. Great price. 74910

- 118534

by: Dick C.01/20/2013

After installing a receiver 13364 with my 12 yr old friend David, we were ready to install the wiring harness. In the past, I've always bought the el-cheapo kits that were available and dug around in the van wiring harnesses looking for the correct wires. Very time consuming and a lot of knowledge needed. This kit is a very reasonable price and as complete as they can get. After reading the directions, David did most of the work and enjoyed every minute of it. A perfect learning experience for a boy, which was both thought provoking and fun. It works as designed and the installation doesn't get any easier than this kit. 63574

- 118534

by: Kevin F07/17/2013

The connections to the tail lights were perfect. I had no problem with the length of the passenger's side green wire as others have metioned. The control module mounts nicely on the slanted part of the driver's side inner tail light wall. The challenge was working in my driveway with out a lift when it was time to install the long black wire to the positive side of the battery. I only had the scissor jack from the van. I am a little weary of running the power wire under the van. I think this is the place where the wiring harness will fail in the future. The total install time for me was 2 hours. 90122

- 118534

by: Dwayne Missouri05/14/2014

I have not hoo me ed it up to a trailer yet, but the product is exactly as advertised. I utilized the convenient video provided by and had it put in properly in no time. The only thing I would suggest is that the manufacturer provide more than one battery connection loop and more than one wire quick connect. The ones provided slipped off and I had to run up to the store to get more which required me to put the project, tail lights etc., back on the car so I could drive safely. Even with this hick up I still had it fully installed with in 2 hours. 130717

- 118534

by: Mick S06/01/2015

The product arrived faster than promised and exactly as it was described on their web page. After installing the wiring I have to say that the instruction videos are very accurate. It helped me a lot to complete the installation. It is really easy if you follow the instructions. I have a Chrysler Town and Country and since this wiring set is designed to be installed independently from the vehicle system my mini van electronics are working perfectly. I tried the connection already and it is working fine. I am very happy with this product. 199649

- 118534

by: David K11/21/2011

Great instructions with the kit. The green lead to the passenger side could be longer though -- the shortest route is a bit tight around corners. 27261


I too found the green lead short, when following the package directions, and installing the module behind the left taillight, instead of below the taillight, as the installation video shows. It took me an hour to get more wire, splice it, solder it, and install it. Please change the packaging instructions so others do not do what I did. Otherwise, install was quick I used more larger zip ties.

-- comment by: Phil J - 11/08/2013


- 118534

by: John04/08/2013

Install was pretty simple, took about an hour. This kit was thought out and tested, this was obvious when you find that all of the wire lengths are perfect. One piece of advice, when removing the connector from the light assembly, slide red piece up, then press the black piece that was under the red slide, once you figure this out it slides apart easily. I am not a big fan of butt connectors, typically I solder wires together. I did use the butt connectors, but, I will probably go back and solder them together. 74753

- 118534

by: Charles08/28/2016

I purchased the Tekonsha wiring harness from E-Trailer after a bad experience with a "multifit" harness from a local auto parts store. The Tekonsha harness installed easily and worked properly without any modifications. The directions show install of the square module behind the taillight, I found the wiring is long enough to locate this module on the interior of the vehicle out of the elements, just above the power liftgate controller which is behind the jack on the drivers side. I recommend this product. 288506


This has been a great product and served my family well. We do not tow everyday with this vehicle but it is comforting to know that the vehicle side of the trailer lighting connection is squared away. etrailer consistently has delivered quality product at competitive prices, I am a repeat customer.

Charles - 10/27/2017


- 118534

by: Jay Love09/06/2011

Instructions are very clear. Everything is exactly the right length; for my Grand Caravan there is about 12 inches of lead from the bumper to the trailer hook up. Perfect! I chose to run the black power lead inside the car, up the driver's side, instead of underneath as shown in the instructions. I ran the wire through new holes I poked in the taillight wire gromet and then through the hood latch gromet, upper left side in front of driver's feet. Easy to install and works great!!! Thank you 23609

- 118534

by: Ed P.06/03/2017

Received wiring harness and hitch receiver in a timely manner. All parts were neatly packaged. Both products appear to be good quality material. The online video was an excellent step-by-step tool to help me install both harness and hitch receiver. I had actually watched it before ordering. My neighbor had recommended etrailer to me. Your company immediately let me know that you had received my order and let me know when it was sent (with a tracking number). This is very professional. Thank you, 388190

- 118534

by: Bill D.09/15/2016

Delivery was quick, shipment undamaged. I griped because I didn't get instructions, but there was a very good on-line instruction video. Hitch went on exactly as advertised and fit perfectly. Seems to be plenty stout. Pretty easy to install, really, though two people are needed to lift it into place and hold it until a couple of bolts get put in. THEN, when we tried to put the hitch bar into the receiver, we found the instructions, which were inside the receiver. So my gripe was unfounded. 295120


Everything is still trouble-free. No problems.

Bill D - 10/19/2017


- 118534

by: Jim M.04/23/2013

This wiring harness worked perfect. I read a review which stated the green wire wasn't long enough. Mine was. I routed & hooked up the green wire BEFORE mounting the control module & before I wire tied the harness to anything. This method provides all the slack you need for a perfect install. I recieved an email with tracking info and the items were in my hands a couple of days ahead of schedule. The people are knowledgeable, friendly & effecient. I will definitely do business with them again. 77535

- 118534

by: Josh M05/17/2017

Overall it is a greatproduct. There was enough wire to run to both sides, and mount everything on the inside (through the knockout inside the tire changing tool compartment) There was not nearly enough zip ties to make it from the back to the battery in the front and I would recommend some wire loom to cover the wire as it is pretty exposed underneath the van. Works perfectly and took around 4 hours install (including the hitch-and running to the parts store for more wire loom) 381517

- 118534

by: Ron A09/13/2012

OOPS! I guess I reviewed the wiring harness with my hitch review. The harness was also easy to install, just as your video showed. I read some reviews that said the green wire going to the right tail-light was too short. It wasn't. One has to adhere the box under the left tail-light, and then the wire has an inch or two to spare. It would be hard to send a photo of the wiring, as I did with the hitch review. Good price, short delivery, easy installation. Couldn't be more satisfied. 54613

- 118534

by: John R.05/05/2013

This was very easy to install. The wire to the passenger side just barely long enough to reach, so plan your positioning well. I haven't tried it on a trailer yet, but I expect it will work perfectly as all my vehicle lights do. Overall I'm very pleased with my purchase and the hidden hitch trailer hitch was very easy to install just as the videos illustrated. I I talked the hitch and harness in less than an hour with even jacking up the vehicle. 79069

- 118534

by: L.O.F.T. GOLF07/12/2012

I'm not really sure about this one! The last T-One wiring kit we ordered a couple months ago was a whole bunch less complicated than this one is. There seems to be as much wiring in the package as is on the vehicle, but I understand. The newest vehicle is a '12 with LED lights, etc. I installed the hitch but will wait for my wife's assistance to do the wiring! I'm sure it's not that difficult but, as a man, I am NOT allowed to read directions! 47698

- 118534

by: L. Elliott04/09/2017

This controller kit was a replacement for a different brand controller that lasted less than one year! Install on this unit was quick as I already had the power wire from the battery set to go. What I liked about this product was that the green wire that runs to the right tail light was actually long enough to reach with plenty of room to spare. Older controllers always included a green wire that was way too tight. This one has it right. 364979

- 118534

by: David C.06/16/2013

The wiring harness was good. Had doubts after I read the other reviews that complained about the green wire being short. I did not have that problem. My problem was finding a good path for the wire going to the battery.. The double sticky patch on the black box really sticks.. just touched it to the car body and it was permanent. Drove across town to try it on the trailer and found out I forgot the fuse! Glad I found this site.. 84876

- 118534

by: Steve06/21/2017

Hitch was great when the in fast. Did it by myself. I think it took me longer to find and get jack, Jack stand and tools together. I got the wire harness also. It was pretty easy also. I did not have any problems with the green wire being short, as I read on some other reviews. One thing I would change, make the power wire to the battery red and or get a red wire protector. So overall everything went smooth and the price is right. 397308

- 118534

by: Charles04/02/2017

Perfect fit! Install was easy with ramps to get the van off the ground and some larger zip ties. THE PROBLEM OF THE GREEN WIRE BEING TOO SHORT HAS APPARENTLY BEEN FIXED. I had plenty of slack for my 2016 Grand Caravan. Just make sure to connect to both tail lights before securing the module. I used some 1/4 inch split loom tubing to protect the green wire from possible debris. Followed etrailer's youtube video for the most part. 361717

- 118534

by: Galen09/15/2016

This is the second model of these I have installed on a 2011 Dodge Grand Caravan since the Curt brand failed (low voltage output on the running lights) shortly after a year. The green wire to the right light assembly is longer on this model with plenty of slack, and the control unit is smaller allowing it to be installed in the light housing. Works like a champ and was installed in less than 45 minutes. Hope it lasts. 294926

- 118534

by: Joe G.12/16/2014

The kit was flawless and easy to use....except for one important problem----- the green wire leading to the connection on the passenger-side tail light was too short. I had to splice another section of wire into the green wire to give it enough length to fit. Service was great, the rest of the product worked as advertised--- but if it doesn't have enough's a problem. Hopefully this will be addressed. 165656

- 118534

by: Randy D.06/07/2015

I was amazed at how quickly my order arrived. A++ on customer service there! Wow! Pricing was the best I'd found anywhere. Somewhere between $80 and $125 less than other sources for the same - or similar items. The hitch install was a breeze and despite my having to un-fish and re-fish a bolt (user error here, I used the wrong bolt hole) it was back on the road in about an hour. The fitment was amazing as well. 201425

- 118534

by: Jacob K.05/16/2017

Bought this 1 year ago and have been completely satisfied with the product. Installation wasn't too difficult, but not a 10min job either. Instructions were detailed and very helpful making for a smooth DIY project. I would highly recommend any product from etrailer. The quality of the products they sell, their customer service, and helpful installation videos all help them stand out in the aftermarket world. 381276

- 118534

by: Mitch V.06/19/2017

I am not someone who looks forward to working on his car, so I was a little worried about being able to install this myself, but the video showed everything step by step. Everything just plugged right into the existing wiring except the wire that ran from the tail light to the battery, and the video showed exactly where the battery wire should be run. In the end it was much easier than I thought it would be. 396184

- 118534

by: Mike Z07/12/2016

I purchased the wire harness and followed the you tube video for instructions. Installation was easy and the product has worked flawlessly for a year now. I also purchase the Curt trailer hitch receiver at the same time. Instructions were easy to follow and the product is still performing very well. The only thing I don't like about the hitch on my mini van is that it makes a lot of noise. 270900

- 118534

by: Matthew W08/13/2014

Bought product with a curt hitch for my Jetta sedan. Like the hitch, it was delivered in 4 days, no problem. Went on like in the video. It took me 2.5 hours to install. The hard part (time consuming) was routing the power cable from the rear of the car to the battery. Otherwise, very easy to install. I have not ja d a chance to test the rig but so far there are no problems. Excellent product! 146684

- 118534

by: Double R 09/24/2017

Super fast shipping. Made the deal for a 2017 Dodge Caravan on Wednesday around 11am,to pickup on Friday at 10am. When home and ordered trailer hitch and wiring harness about Wednesday at 1pm. Pickup van on Friday, home by noon, hitch and harness were on the driveway waiting on us. I' ll be real happy if this system works as good as the sane system I installed on my 2016 Dodge Caravan. 435994

- 118534

by: Good harness06/03/2016

The only reason I am giving this a 4 is because i had to run a cable all the way to the battery. But I think that's a VW problem not the wiring harness. It was super easy to install other then that. Just unplug the connectors that go to your tail lights and plug in the new harness and your good to go. Works great too, no problems with lights for the trailer after a full year of using it. 256278

- 118534

by: John A07/14/2014

Good product, great service! This is my 2nd purchase made here. I traded my Kia Sedona in for a Dodge Grand Caravan; therefore, the repeat. The Hidden Hitch hugs the rear seat fold-in so well that there should be no contact with the exhaust at all. I have yet to use it with trailer, but do not expect any problems. I buzzed out the electrical and all was working. Sorry, no picture yet. 141304

- 118534

by: Cameron W.07/10/2014

The wiring harness was fairly simple to install, but the instructions were vague in spots and didn't have the correct information for our van on some of the steps. I've done these before, so I knew what to do in general. All the parts needed were in the kit and the wires were long enough and the plug-n-play connectors worked well. Wouldn't want to wire up a new vehicle any other way! 140627

- 118534

by: Dan P04/16/2015

The wiring kit was everything it was advertised as. My only complaint is the nut used to secure the wire to the battery terminal was not included. My order took a while to ship until I emailed to ask about it, then it shipped immediately. I have ordered from etrailer multiple times and always been very pleased with their shipping and customer service, so I consider this an anomaly. 185458

- 118534

by: Rodney F.06/24/2017

The wiring harness is an excellent, direct fit for my 2017 Dodge Grand Caravan. The process was pretty straight forward, but it is tedious and took far longer than installing the hitch. The butt connectors are now heat-shrink, and offer good protection against the elements. Overall, this was a good purchase, but be prepared to spend time routing the power wire to the battery. 398676

- 118534

by: LJ06/28/2017

Trailer hitch and wiring came sooner than thought. Received on a Wednesday afternoon and by early evening my son and I had it installed and ready to tow. The instructions were very good for both hitch and wiring. Will recommend to anyone looking for do it yourself project to use Why pay the price to have it put on when you can do it yourself. Thanks etrailer 399806

- 118534

by: Greg s07/23/2016

The harness fit the application like described. I would like to see a better way to attach the box to the vehicle. There is a provision on the box for a steel mounting tab but no tab supplied from the manufacturer. Instead they use double sided tape which does not seem like a very permanent solution. For the cost of this harness I would have expected a little higher quality. 275315

Show More Reviews

Ask the Experts about this Tekonsha Custom Fit Vehicle Wiring
Do you have a question about this Custom Fit Vehicle Wiring?

  • Is a Brake Controller Needed to Activate Electric Brakes on Pop-Up Camper
  • Electric brakes on a trailer do require a brake controller be installed in the tow vehicle to activate them. Among the most popular and reliable units we offer is the Tekonsha Prodigy P2, part # 90885. This brake controller is easy to set up and operate and offers 3 boost levels, battery protection and continuous diagnostics. It is among the highest-rated controllers used by our customers. Installation of this unit will require a brake controller installation kit, part # ETBC7 that you...
    view full answer...

  • Towing Setup Recommendations for a 2014 Dodge Grand Caravan SE
  • The final authority on the tow capacity is the owner's manual. If your owners manual says 3,600 weight carrying and 5,000 lbs weight distribution then that is the actual capacity your vehicle has. The Draw-Tite part # 75579 that you referenced would be an excellent hitch that has similar capacities. I attached an install video for this hitch for you to check out as well. Now a weight distribution system is a hitch that distributes some of the tongue weight on the hitch to the front...
    view full answer...

  • Recommended Trailer Wiring for a 2015 Dodge Grand Caravan
  • The wiring options for your 2015 Dodge Grand Caravan all install the same way and provide you with a 4-Way flat connector for your basic lighting functions on your trailer. The only exception is the Tekonsha part # 22121 which provides a 7-Way and the ability to add a brake controller. Since your trailer doesn't have brakes it would be better to stick with a 4-Way. Out of the available options, I recommend going with the Tekonsha T-One # 118534. We have found that Tekonsha is the most...
    view full answer...

  • Differences Between the Class III Hitches For the 2012 Dodge Grand Caravan
  • There are two Class III hitches available for the 2012 Dodge Grand Caravan. The Draw-Tite Class III 2-Inch Hitch, part # 75579, and the Curt Class III 2-Inch Hitch, part # 13364. Both of the hitches use a square tube design and will install in the same location on the vehicle. So they will all look the same on the rear of your Grand Caravan. The difference between the Curt hitch, # 13364, and the Draw-Tite Trailer Hitch, # 75579, is the mounting bracket on the passenger side. The...
    view full answer...

  • Tail Light Fuse Blows on Chrysler Town and Country with Tow Ready T-One Harness Installed
  • I'm sure you are already aware of this, but the M17 fuse is the fuse for your left tail light and license plate light. Since the fuse keeps blowing when the Tow Ready T-One Wiring Harness, # 118534, is installed and it does not blow when the harness is removed, then that is a pretty good indication that the harness is the problem and it should be replaced. There is a good chance that the converter box shorted out causing the fuse to blow. A new wiring harness will most likely fix the...
    view full answer...

  • Installing a Brake Controller on a 2013 Chrysler Town and Country
  • There will have to bee some cutting and splicing to install a brake controller on your 2013 Chrysler Town and Country. Chrysler did not add a factory brake controller harness to the Town and Country, so the brake controller will need to be hardwired. The good news is that you will likely only have to splice one wire into your vehicle wiring. To install a brake controller like the Curt TriFlex, # C51140, that you referenced, you will want the Curt Universal Brake Controller Wiring Adapter,...
    view full answer...

  • How Long Does it Take to Professionally Install Trailer Wiring on a 2012 Dodge Grand Caravan
  • Installation of wiring harness # 118534 on any given vehicle depends on how the power wire is routed from the back of the vehicle to the front of the vehicle. It does take some time. If the tech just zip ties the wire to the bottom of the vehicle then it should not take very long at all, definitely not 3 hours. But if he takes care in where the wire gets ran to protect it I could see it taking that long. Also, there could be unforeseen complications that extend the installation time....
    view full answer...

  • Difference Between Tow Ready Wiring Harness # 118534 and Curt T-Connector Wiring Harness, # C56150
  • The Tekonsha T-One Vehicle Wiring Harness, # 118534, and the Curt T-Connector Vehicle Harness, # C56331, both serve the same functions but are just made by two different companies. Either harness is compatible with your 2011 Chrysler Town and Country but my personal recommendation would be to purchase the Tow Ready brand. This harness provides a higher maximum amperage per circuit. I have attached videos which demonstrate the installation process of both harnesses for you.
    view full answer...

  • Trailer Hitch and Towing Capacity for a 2014 Dodge Grand Caravan
  • I pulled up the owners manual for your 2014 Dodge Grand Caravan and it looks like the trailer towing capacity is 3,600 lbs if you have only 2 passengers, 3,350 lbs for if you have 3 to 5 passengers, and 3,000 lbs if you have 6 to 7 passengers. For a trailer hitch that would have more than enough capacity for your vehicle Draw-Tite Hitch part # 75579 has been confirmed as a fit and would work well. I attached an install video for you to check out as well. If you wanted to do some towing...
    view full answer...

  • Installing 7-Way Trailer Connector and Brake Controller in 2014 Dodge Grand Caravan
  • To install a 7-way trailer connector on your van, you'd first install a functional 4-pole connector, like part # 118534. Once that's installed, you can install a 7-way by plugging the # 37185 adapter into the 4-pole. Once the white wire is grounded, the lighting functions on your 7-way will all be functional. If your trailer has electric brakes, and you want them operable you'll need to install a brake controller. For a basic but easy to use controller, I'd recommend the Tekonsha Primus,...
    view full answer...

  • Recommended Towing And Suspension Enhancement For 2016 Dodge Grand Caravan
  • With a new vehicle you are doing the right thing in setting up everything to safely tow your boat. I can help you out with that. First I recommend the Draw-Tite Max-Frame Trailer Hitch, part # 75579. This is a Class lll hitch and it has a 2-inch receiver opening. Since you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also...
    view full answer...

  • Does the Computer Have to be Flashed on a 2012 Chrysler Town and Country to Install Trailer Wiring
  • Both wiring harnesses for the 2012 Chrysler Town and Country, see link, are T-connectors but also need power from the vehicle battery in order to power the trailer lights. The T-connections provide the signals that tell the converter what to do. This method protects the electrical system on your van. Because these harnesses require a battery connection, you will need to disconnect the negative cable when wiring in the harness. Having the battery disconnected will essentially re-set the...
    view full answer...

  • Will Draw-Tite Hitch 75579 Fit a 2015 Dodge Grand Caravan with Stow-n-Go Seating?
  • Yes, the Draw-Tite Hitch # 75579 does fit 2015 Dodge Grand Caravans with Stow-n-Go seating. I've attached a video of this hitch being installed on a 2015 Caravan with Stow-n-Go seats which should be helpful. You can see in the video how the exhaust is lowered to give better access for mounting the hitch. The mounting holes should be 52 3/4" apart on this hitch. If yours is not measuring that distance, it could be that the hitch was slightly flexed in shipping. I've attached an article...
    view full answer...

  • Which Trailer Wiring Harness for 2016 Dodge Grand Caravan
  • A vehicle can have a separate or a combined taillight system. A separate system would use a different bulb for the brake lamps and the turn signals. Usually the turn signal bulb or lens over the bulb would be amber in color. Some vehicles use a combined system, which use the same bulb for brake lamps and turn signals. Your Grand Caravan has a combined wiring system, so either the Curt # C56331 or the Tow Ready # 118534 would work well for you.
    view full answer...

  • Hitch Recommendation for a 2014 Chrysler Town and Country that Doesn't Require Fascia Trimming
  • Draw-Tite trailer hitch # 75579 will fit all models of the 2014 Chrysler Town and Country. There should be no bumper fascia trimming required. The only trimming mentioned in the instructions, linked to the right, is possibly on a mudflap. I have also included a link to a video showing a typical installation for you. The Curt Hitch part # 13364 that you referenced would most likely require you to trim the fascia so I would not recommend it for you. If you plan on doing some towing...
    view full answer...

  • Troubleshooting Curt 3 Wire to 2 Wire Converter
  • It sounds like the converter box on the wiring harness might have a short. I recommend checking the signals going into and coming out of the converter box. You will want to use a circuit tester, like # 40376, to test these wires. If the signals going in does not match the signals going out, your converter box has a short and you will want to replace your wiring harness. If you need to replace the wiring harness, I recommend the Tow Ready T-One Wiring Harness # 118534. This wiring harness...
    view full answer...

  • How Does Curt Trailer Hitch 13364 Install on a 2014 Dodge Grand Caravan and is Trimming Required
  • Curt trailer hitch # 13364 has 2 bolt holes on the passenger side of the vehicle because the forward most bolt on the vehicle is there holding on the vehicle bumper and Curt decided this location was not necessary to safely secure the hitch to the vehicle. It looks like all of the hitches use just 2 fasteners on the passengers side. Trimming might be required on the Town and Country vans according to the instructions, linked for reference, but the 2014 Dodge Grand Caravan is not mentioned....
    view full answer...

  • Installing a Brake Controller on a 2016 Chrysler Town and Country Van
  • The 2016 Chrysler Town and Country did not come with a factory installed tow package and a 7-way trailer connector. You will have to hardwire in a 7-way and the all the wiring so you can install your controller. None of the wiring is pre-installed on this model vehicle. The first thing you will need to do is wire in a 4-way flat trailer plug if you have not already done so. You will need a wiring harness, I recommend the Tekonsha T-One harness, # 118534. This harness is custom-fit to...
    view full answer...

  • Drivers Side Tail Light Fuse Blows Again on Chrysler Town and Country with Curt Wiring Harness
  • The chance of receiving two faulty converter boxes is very low and we have not had any recurring complaints on trailer wiring harnesses for the Chrysler Town and Country or Dodge Grand Caravan minivans. A blown tail light fuse could indicate that the converter box has shorted out allowing power to back feed onto the tail light circuit. The main causes that we find for faulty converter boxes are short circuits on the trailer, excessive power draw, and faulty installations. Before installing...
    view full answer...

  • Towing Capacity, Trailer Hitch, Wiring, and Transmission Cooler for a 2015 Chrysler Town and Country
  • The towing capacity of your 2015 Chrysler Town and Country is going to depend on a few factors. Take a look at the picture I have included from the owner's manual. It illustrates the capacity of the vehicle in certain scenarios. At most the van can tow 3,600 pounds. I do recommend a transmission cooler because when towing or even when just carrying a lot of weight in the van, it puts additional strain on the transmission. A supplemental cooler will help to lower the fluid temperature...
    view full answer...

  • Prodigy Brake Controller Installation in 2017 Dodge Grand Caravan
  • Brake controller installation in your 2017 Dodge Grand Caravan will be a hard-wired application. Even though the van may have the current tow package, exactly what that term means will vary from auto maker to auto maker, from vehicle model to vehicle model and even among different production years. There is no standard definition of what a "tow package" means. In some cases it means an engine with greater displacement, in others it could mean a beefier transmission, or an extra large...
    view full answer...

  • Trailer Hitch and Wiring Recommendations for 2013 Dodge Grand Caravan with Stow and Go Seats
  • For your 2013 Dodge Grand Caravan with Stow and Go seats I recommend Curt trailer hitch # 13364. This is a 2 inch hitch rated for 400 pounds tongue weight and 4,000 pounds gross trailer weight. I have included a link to a video showing an example installation for you. If you plan on doing some towing I recommend etrailer ball mount kit # EBMK4. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip, and a storage bag. And for...
    view full answer...

  • Tow Package Recommendation for a 2012 Dodge Caravan
  • Transmission coolers are often not totally required, but they do help prolong the life of the transmission. It's your call, but it's a cheap investment to help prolong the life the transmission. For a transmission cooler I would recommend the Derale Transmission Cooler part # D13502. For a hitch I would recommend the Draw-Tite Class III receiver, part # 75579. You will also need a trailer wiring harness, part # 118534 to provide a 4-pole trailer connector. If the camper uses a 7-way...
    view full answer...

  • Can I Disconnect Power from Curt T-Connector Part C56331 When Not Towing For Long Periods
  • The correct Curt trailer wiring harness for your 2013 Dodge Grand Caravan is part # C56331. This does include a mains fuse holder for controlling 12V power to the taillight converter box. If you wish you may remove this fuse to cut-off power input to the converter box. However, do be careful to avoid losing the fuse (or keep some spares in the glove box, which is a good idea in any case). Do please note that when the converter output is not connected to a trailer via the 4-pole, no...
    view full answer...

  • Brake Controller Installation on 2012 Dodge Grand Caravan
  • The # 3021-P is a fit for 2010-2012 Dodge Ram trucks. Your Grand Caravan wasn't equipped with the plug under the dash for installing a brake controller, so you'll need to hardwire your controller. Have no fear, we have the resources to help you complete the installation, including a how-to article and an install video that will walk you through the process. First, you'll want to choose a brake controller. I'd recommend the Tekonsha Prodigy P2, part # 90885. The P2 is extremely easy to...
    view full answer...

  • How Far Will Hitch Pin Hole of Curt Hitch # C12264 Be Recessed Under Bumper of 2014 Grand Caravan
  • When we installed the Curt # 13364 on a 2014 Grand Caravan, we found that the receiver was recessed under the vehicle so that there was four inches between the hitch pin hole and the furthest rearward point of the back bumper. According to Curt, the receiver tube on the Curt Class II # C12264 is of the same length as the 13364, so it should also be recessed by 4 inches. If you'll be using the hitch for towing, you'll also need a trailer wiring harness, part # 118534, a ball mount,...
    view full answer...

  • Trailer Lights Stay On when Connected to 2015 Dodge Grand Caravan with Curt Wiring Harness
  • If you are using Curt trailer wiring harness # C56331 on your 2015 Dodge Grand Caravan then those harnesses do allow power to the 4-Way even with the vehicle off. On a trailer that has LED lights the lights will be on brighter than if it had incandescent lights. You would want to disconnect the trailer when parked. I do not believe that you have a bad ground or a faulty converter box. This is a common characteristic of Curt powered wiring harnesses. The comparable Tow Ready harness...
    view full answer...

  • What do I Need to Tow a Small Trailer Behind a 2015 Dodge Grand Caravan
  • You are going to need a few items to tow a small trailer behind your 2015 Dodge Grand Caravan. If you do not already have a hitch on your vehicle, you will need one to attach the trailer to your vehicle. I recommend 2" Curt Hitch Receiver Class III # 13364 for your Grand Caravan. It is confirmed to fit your vehicle by Curt and we have test fitted the product on a 2015 Dodge Grand Caravan. I have attached a photo of this hitch on your vehicle for you to look at. This hitch uses a bolt-on...
    view full answer...

  • Recommended Trailer Hitch For 2012 Chrysler Town And Country
  • We do offer some Class lll hitches for a 2012 Chrysler Town and Country. I did some research on your van and found that the trailer towing weight for your Town And Country is 3,600 lbs, and is 3,500 lbs if you have the Stow-N-Go seating. The trailer hitch I recommend is the Curt Trailer Hitch, part # 13364. This is a Class lll hitch and has a 2 inch receiver opening. You will want to consider where the receiver end is under your van when you want to install any accessories like...
    view full answer...

  • Recommended Parts for Towing a Popup Camper with a 2015 Dodge Grand Caravan
  • I can help get a towing setup for you to be able to haul a popup trailer with your 2015 Dodge Grand Caravan. I went ahead and found the custom fit parts for your 2015 Dodge Caravan and listed them below. The GTW (Gross Trailer Weight) will depend on your vehicle and the number of passengers and whether or not you have the fold-in-floor seating. I linked an image from your owners manual showing the ratings. One of the custom fit 2 inch hitches for your vehicle is the Draw-Tite #...
    view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?

  • Why

    At we guarantee:

  • Highest quality custom fit vehicle wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Test Fit:
Joe V
Photos by:
Theodore B
Expert Research:
Jackie C
Expert Research:
Michael L
Video Edited:
Zack K
Video by:
Andrew K
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Test Fit:
Rick A
Expert Research:
John H
Video by:
Patrick B
Expert Research:
Brandon M
Video by:
Andrew L
Expert Research:
Adam R
Video Edited:
Kathleen M
Video Edited:
Mike H
Updated by:
Laura H
Video Edited:
Dustin K
Test Fit:
Shane T
Expert Research:
Jeffrey L
Test Fit:
Randy B
Video Edited:
Chris R
Updated by:
Sarah W
Test Fit:
Brent H

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

About Us
photos and videos

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.


Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.