Can I Use the SnapPad SnapJack SJ RV Scissor Jack Pads with My Scissor Jack Cross Brace Stabilizer?

Question

Question:

Will these snap pads work with the MORryde Scissor Jack Cross Brace Stabilizer for Trailers and RVs MR82AR, I know they will not work with the JT Strong Arms, but will they work with the MORryde Scissor Jack Cross Brace Stabilizer for Trailers and RVs MR82AR

asked by: Chris

0

Expert Reply:

Hello Chris,

Great question, in fact it was such a great question that I needed to reach out to my contact at SnapPad because I could not find that information anywhere.

He stated that the SnapJack SJ RV Scissor Jack Pads - Qty 4 # SN32FR will work with your MORryde Scissor Jack Cross Brace Stabilizer for Trailers and RVs # MR82AR, he did also state that you might need to use the new hardware or bolt with the Snapjack foot.

What kind of Travel Trailer or RV is this going on?

expert reply by: Kate F

0

Chris

3/14/2025

2021 GD Imagine 2800BH

Reply

Kate F.

3/16/2025

@Chris Hey Chris, I really like the Grand Designs! I hope you have many awesome adventures in it this year =)

Reply

Answer 1

Jeff, it’s more solid than you’d expect for a no-drill bracket. The #MR72ZV is sturdy and has a bit of weight, especially once the weight distribution hitch and bars are added. Nobody will be lifting that off the trailer's frame all in one go. If…

view full answer...

Answer 2

Shannon, I wouldn’t recommend that. This #MR72ZV bracket isn’t bolted through the frame, it’s just held in place by the weight of the bracket. A 1/2" set screw can be added if wanting a more secure fit. It works great for storing your spring…

view full answer...

Answer 3

That’s one of the big advantages of the MORryde WDH Storage Bracket #MR62ZV - you can leave it mounted while you’re on the road. It bolts permanently to the A-frame and won’t interfere with your hitch. Just remove the bars and shank and install on…

view full answer...

Answer 4

Hey Jonathan, I hope MORryde comes up with a 2-1/2 inch hitch version of the WD storage bracket part #MR72ZV that you referenced but it only will fit the shank of a 2 inch system.

view full answer...

Answer 5

Hey Richard, You will not want to use the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers #LC191025 and SnapPad SnapJack SJ RV Scissor Jack Pads #SN32FR together, no. They use different hardware so are not compatible, but both will do a…

view full answer...

Answer 6

TorkLift PowerArmor Locking Battery Box #TLA7712R is a universal fit type of item so it can fit just about anything. I looked at some pictures of the 2011 Lance 2185 and it appears that there is some space between the front of the body and the…

view full answer...

Answer 7

Hi Steve, great question! The bolt spread dimensions on scissor jacks aren’t universal, they can vary a bit depending on the brand and capacity. Most standard RV scissor jacks use a mounting plate that’s roughly 3-1/4" wide with bolt holes…

view full answer...

Answer 8

Hey Steve, the difference between the two kits is the stabilizer jacks each is designed to fit. I don't have a way to look up what system your Grand Design has so you would have to check that before ordering. The part #SN44VR fits Lippert PSX1…

view full answer...

Answer 9

I have searched your trailers specific information and I am unable to pin point exactly what size feet your Springdale trailer has on the jacks. Take a look at the image below and let me know if your trailers' jacks look like the jacks in this…

view full answer...

Answer 10

Hi Carl; the saddle attachment on the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR is 3-1/4" wide at the base of it before the sides flare out. What will you be using the jack for?

view full answer...

Answer 11

Hey David, thanks for the picture! I went down to the warehouse and measured the mounting bolt pattern on the etrailer Scissor Stabilizer Jack item #e36VV and their identical to the ones in your diagram. This jack is going to be a perfect replacement…

view full answer...

Answer 12

Both the K-Source towing mirrors, #KS81300, and the CIPA towing mirrors, #CM11300, do fit if your 2012 Toyota Tundra has electric and/or heated stock side mirrors. They will not fit Limited or Platinum models though. I agree that the K-Source mirrors…

view full answer...

Can I Use the SnapPad SnapJack SJ RV Scissor Jack Pads with My Scissor Jack Cross Brace Stabilizer?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching