Crossbar Stabilizer For Scissor Jacks on Forest River Camper

Question

Question:

Does anyone make scissor jack stabilizer cross bar to eliminate movement for a 2022 Forest River EPro 19FD. I have 55” spacing from center to center on the scissor jack.

asked by: Brian C

0

Expert Reply:

Hey Brian,

There is an option for a crossbar stabilizer that you can use for the stabilizer jacks on your Forest River camper with the MORryde Scissor Jack Cross Brace Stabilizer for Trailers and RVs # MR82AR.

This will work with your 55 inch spacing for added stability. I've added a link below to a video review of the # MR82AR for you to check out as well.

expert reply by: Kyle S

0

Brian

10/25/2024

This looks like the one I recently purchased and does not fit my trailer. According to Morryde’s website, they only make one version for travel trailers.

Kyle S.

10/25/2024

@Brian Interesting that it didn't fit, and while there is another option, it isn't a crossbar. If that's okay you can go with the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers # LC191025. This works in much the same way but bolts onto your frame and then attaches to your scissor jacks. So it'll give you added stability, just in a different configuration than a crossbar type stabilizer.

Helpful Links

tv-review-lippert-jt-strong-arm-jack-stabilizer-kit-lc191025.aspx

Answer 1

Yes, you would want to purchase 2 of the MORryde Scissor Jack Cross Brace Stabilizer for Trailers and RVs #MR82AR if you're wanting to install on both sets of stabilizers on your 2021 Grand Design Imagine.

view full answer...

Answer 2

The difference between the MORryde Scissor Jack Cross Brace Stabilizer for Trailers and RVs #MR82AR, and the JT's Strong Arm Jack Stabilizer Kit #LC191023 is while both limit side to side movement of your 30' travel trailer, only the JT will…

view full answer...

Answer 3

If the scissor jacks on your 2023 Grand Design Solitude 380FL 5th Wheel are oriented with the open ends facing the front and back of the trailer (as seen in the picture below) then you'll be able to use the MORryde Scissor Jack Cross Brace…

view full answer...

Answer 4

Tri Pods do give you a major boost in stabilization, but a system like the JT Strong Arm Stabilizer Kit #LC191025 will be much more stabilizing. Why? Well you are taking your current jack and adding two separate components, creating a larger spread…

view full answer...

Answer 5

For your Grand Design Reflection 312BHTS I recommend the Ultra-Fab Slide-Out Supports #UF19-960002. Since your Reflection has the 2 opposing slides that carry the weight of most the kitchen and the seating areas the trailer is virtually teetering on…

view full answer...

Answer 6

Yes, you can add two stabilizer jacks to the long tail portion of your Sabra to help stabilize it along with your Lippert Ground Control part #LC675817. I recommend the pair of 2 Ultra-Fab Scissor Jacks part #UF48-979031 to add to the rear of the…

view full answer...

Answer 7

These manual scissors jacks are for stabilization and not for leveling, so if you want to level out your Class C Winnebago Vita motorhome then you will need leveling blocks, the Ultra-Fab Leveling Blocks for Trailers and RVs #UF48-979051. Then for…

view full answer...

Answer 8

The capacity for scissor jacks is a static capacity which means that it can support up to that amount of weight but can not lift that amount. For a 7,000 lb trailer the Ultra Fab Scisso jacks #UF48-979031 that you referenced would work just fine. I…

view full answer...

Answer 9

In order to further stabilize your Jayco travel trailer, I recommend additional jacks and wheel chocks. The best way to minimize swaying and rocking would be to have a total of four stabilizer jacks, one for each corner of the trailer. If you do not…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Crossbar Stabilizer For Scissor Jacks on Forest River Camper

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching