1. Camper Jack
  2. Brophy
  3. Truck Bed Camper Jack
  4. Cable Jack
  5. 67 Inch Lift
Brophy Cable Camper Jacks - 67" Max Lift Height - 3,000 lbs - Qty 2

Brophy Cable Camper Jacks - 67" Max Lift Height - 3,000 lbs - Qty 2

Item # CJ74
lowest price pledge
Our Price: $499.58
Camper Jack
This item qualifies for Free Shipping
Shipping Weight: 95 lbs
Quantity: 
In Stock
Brophy Cable Camper Jacks - 67" Max Lift Height - 3,000 lbs - Qty 2 Cable Jack CJ74
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Easily load or unload your truck camper with this pair of sturdy cable jacks. Portable design does not require permanent installation. Simply place the lift brackets under your camper and crank to raise. Breaks down into 3 pieces for storage. Call 800-298-8924 to order Brophy camper jack part number CJ74 or order online at etrailer.com. Free expert support on all Brophy products. Guaranteed Lowest Price and Fastest Shipping for Brophy Cable Camper Jacks - 67" Max Lift Height - 3,000 lbs - Qty 2. Camper Jack reviews from real customers.
  • All Info
  • Reviews (25)
  • Q & A (20)
  • Videos (2)
  • Photos
  • Why etrailer?

Brophy Camper Jack - CJ74

  • Truck Bed Camper Jack
  • Cable Jack
  • Brophy
  • 67 Inch Lift

Easily load or unload your truck camper with this pair of sturdy cable jacks. Portable design does not require permanent installation. Simply place the lift brackets under your camper and crank to raise. Breaks down into 3 pieces for storage.


Features:

  • Cable jacks help you load and unload your truck bed camper
    • Also great for mounting and removing your truck topper or camper shell
  • Portable design - no need to permanently install unsightly electric jacks on your camper
    • Each jack disassembles into 3 pieces for easy storage
  • Extra-tall poles let you clear the bed rails on tall pickups
  • Hand winches let you easily raise and lower the jacks
    • Safety latches keep the cables from free-spooling
    • Plastic handle grips offer comfortable cranking
  • Aircraft-grade cables are strong and reliable
  • Sturdy tripod bases evenly distribute your camper's weight
    • Help to eliminate front-to-back and side-to-side motion
  • Large footplates help to prevent sinking and tilting
  • L-shaped lift brackets support the bottom and the sides of your camper
    • Simply place lift brackets under your camper and crank the winches to raise
  • Durable, corrosion-resistant construction
    • Tripod bases and lift brackets are black powder coated
    • Upright poles are galvanized
  • Made in the USA


Specs:

  • Quantity: 2 cable jacks
  • Lifting range: 17" - 67"
  • Overall height when assembled: 76"
  • Combined weight capacity: 3,000 lbs
  • Lift bracket dimensions (each): 26-1/2" long x 2" wide x 2" tall
  • Leg lengths:
    • Fixed: 17-1/2" from end to edge of pole opening
    • Collapsable: 15"
  • Footpad diameter: 4-3/4"
  • Winch gear ratio: 4:1
  • 1-Year limited warranty


Note: Always use these jacks in pairs on level ground. Not approved for commercial or rental use.


Lifting your truck camper on and off of your pickup truck is challenging if you don't have the right equipment. This pair of reliable cable jacks helps you load and unload your camper with ease. No permanent installation is required, so you won't have unsightly and expensive electric jacks hanging off of your camper. And because these jacks break down into 3 portable, easy-to-assemble pieces, you can take them everywhere the road takes you.


Ideal for Tall Pickup Trucks

Got a super tall or lifted pickup? No problem. The uppermost poles on these jacks are elongated so you can lift your camper up to 67" off the ground, which should be more than enough to clear the bed rails of even the loftiest truck on the road.


Simple Operation

Using these jacks is simple. Place 1 jack on each side of your camper and position the L-shaped lift brackets underneath the body of the camper. Then crank the hand winches to lift or lower each side of the camper evenly until the proper height for loading or unloading is achieved.


It is recommended that 2 people operate the jacks simultaneously to make it easier to raise each side of the camper evenly. However, 1 person can do the job by alternately lifting or lowering each jack in small increments.



CJ74 C. R. Brophy Tripod Winch Jacks for Truck Campers and Camper Shells - 3,000 lbs - Qty 2





Video of Brophy Cable Camper Jacks - 67" Max Lift Height - 3,000 lbs - Qty 2

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Brophy Camper Jack - Truck Bed Camper Jack - CJ74 Review

Speaker 1: Today we're gonna be taking a look at the Brophy Cable Camper Jack Stand. These are gonna be two quantity, and they're gonna have a 67 total travel distance, they have a max capacity together of 3,000 lbs.Now these are gonna be a great item to help get your in-bed camper out of your truck bed, they can also be used for camper shelves, or truck toppers as well. Basically it's just gonna work so you see I've got one assembled here and the other one is gonna be disassembled, so you can see it a little bit better.But one bracket will go on one side of your camper, and then you just put the other one on the other side, and then crank it a little bit at a time to get it to the right height; if you're working by yourself you just wanna make sure that you go back and forth, so that you lift it evenly. It is always nice to have a second person to make that go a little faster, but you can do it by yourself just fine.Basically just operate it by the crank handle here . to lift it, or, if you flip the switch, that'll allow you to lower it as well. And it does have that safety switch to prevent it from just free-spooling.

You can lift that switch so whenever you're getting into place, you can adjust it as you need it, but as you're cranking it, you don't have to worry about it all just falling down or anything like that, it is gonna hold it in place nicely so you can get that cranked up and in the position that you need it.Now, it does disassemble into three pieces, so it can be more easily stored. As you see we have our bracket here, our lift bracket, we also have the stand, and this does collapse down, so one of the legs can swing out . to hold the weight of your camper, or it can swing back in to make it a little bit sleeker of a profile . as you can see like that.So it's a nice option, with the pole as well, you can just collapse that all down, put it somewhere, the pole is gonna be the longest thing of course, it's gonna be about 70 inches in total, and so you will just have to find a place in your camper, or your truck to house those things whenever you're not using it, but otherwise, you can load it up pretty easily and you're ready to go.Now that pole being so long is gonna be nice for those taller truck beds, as newer trucks nowadays, they have those higher sides, you need that extra height to get your camper in and out of your truck, so this is definitely gonna help with that, since it's gonna raise all the way up to that extended height. It does have that hand wench to let you easily raise and lower your jack, does have a plastic handle on that wench, to make it a little easier to grab so you're not just having to grab bare metal, as you can see there, it's just a nice plastic handle, sort of ergonomic shape.The cables are made of an aircraft-grade cable, and they're gonna be very strong and reliable, so you don't have to worry about those fraying or breaking over time.

And again it does have that tripod base to evenly distribute the weight of your camper and that's gonna eliminate any shifting or wobbling to the side.The bracket is gonna be L-shaped, so it's just gonna fit right up to your camper's edge there, as you can see, it's got that L-shape, and that's just gonna slide right underneath the edge of either side of your camper, to let you lift it or lower it as needed. The lift bracket and the stand are gonna be a black powder coat finish to reduce rust or corrosion. And the upright pole is galvanized again to resist corrosion as well.As far as a few measurements for this kit, the overall height when assembled altogether here is gonna be 76 inches, and the lift range is gonna be from 17 inches all the way up to 67 inches, so that's give you plenty of height to get that camper loaded or unloaded. It's also going to have that combined weight capacity of 3,000 lbs. The lift bracket itself from end-to-end, this L-portion here, that's gonna be 26 and a half inches, the upright portion, or the L-portion, that's gonna be two inches from top to bottom, and then two inches from the inside to outside.As far as the stand, from the sort of center pole opening to the outer edge on the fixed legs, that's gonna be 17 and a half inches, the diameter on all these little footplates is gonna be about five inches, and then the collapsible leg whenever you have it swung out at its furthest its gonna be about 15 inches there again from the edge of that center pole opening to the edge of the foot.The gear ratio on our wench is going to be four-to-one, so that's gonna help with lifting that camper up and down, and take a little bit of the brunt of that weight off of you.

And that's gonna do it for our look at the Brophy Cable Camper Jacks with a 67 max lift height, 3,000 combined lift capacity, and a inaudible 00:05:39 quantity of two.


Customer Reviews

Brophy Cable Camper Jacks - 67" Max Lift Height - 3,000 lbs - Qty 2 - CJ74

Average Customer Rating:  4.6 out of 5 stars   (25 Customer Reviews)

Easily load or unload your truck camper with this pair of sturdy cable jacks. Portable design does not require permanent installation. Simply place the lift brackets under your camper and crank to raise. Breaks down into 3 pieces for storage.

- CJ74
by:

Unfortunately, we rectified the issue without the use of the jacks. But from setup & initial inspection, I feel they are more than adequate to do the job they are designed for. 635338



- CJ74
by:

I have a unique situation that made it hard to take my camper off of my truck. First, I have a 1936 Ford with a custom flat bed. Second, I built a camper (what I call a dog house) to fit the flat bed. I needed something that could handle the flexibility and these worked great. I can either remove the camper from the bed, or the bed and camper from the truck. Used them twice so far, but I'm glad I bought them. 417158



- CJ74
by:

Apppreciate the quick order process and delivery. The jacks worked like a champ. Thank you. 570936



- CJ74
by:

Received jacks about 4 days after ordering & they work perfectly for my slide in camper very secure 380257



- CJ74
by:

The jacks worked perfect! Etrailer was super fast at getting them shipped, took about five minutes to put together, I was able to remove the camper by myself, just have to go a little bit at a time. Very happy with this purchase. 442567



- CJ74
by:

Finally got them setup and pulled the camper. They were delivered earlier than expected. They are well constructed and easy to use. etrailer promptly handled my concerns with some address issues . Jeri went above and beyond. I will use and recommend this company. 449820


Comments
They performed excellently. I used them 4 times with no issues. Definitely getting my moneys worth. I should mention that one of the welds on on leg of one of the bases broke. Thankfully I was only putting them in garage.. I havent met any welders in our new town so cant use them anymore Its not very often a business cares enough to contact their customers. I am pleasantly surprised that you checked up. Regards,
Thomas - 11/07/2018

45498

- CJ74
by:

this was exactly what I needed to take my pop-up camper on n off my truck. Works exactly as intended so I reckon Im now a Happy Camper! Thanks 713057



- CJ74
by:

worked great for my slide in camper.... fast delivery very happy 711084



- CJ74
by:

Got what I ask for, price was reasonable, got it right on time, thanks Tim, job well done. 675366



- CJ74
by:

Just received the two jacks. They arrived quickly. Although there was a bent part, the top of the vertical tower where the roller is. It’s okay I had to bend it back out. Maybe should’ve had a little more padding due to our mail services rough handling. Haven’t used them yet but I’m thinking I’m going to have to get extensions wielded to compromise for the width of my truck tires that stick out 3” from the side of the truck. I wish you could have those already available for this situation. But first impressions, they look strong and all is functional so far. 674940



- CJ74
by:

It’s a quality product, that did exactly what I needed it to do. Reason for 4 stars is because the packaging was poor. The poles were fine, but there wasn’t any padding/packing; which resulted in the card board box being full of holes, and several areas that are painted black, to be rubber/scraped off. 669215



- CJ74
by:

didn't take long to get in the mail i will not have to them no more and they very hard to find at rental yards the price was good and i got free shipping these are made very well and lifts my truck camper very eazy i will be buying other products this outfit and it looks like i can find some of the oddball stuff i need for my camper at good prices and fast service Thanks Bill 646859



- CJ74
by:

I won’t be using the cable jacks till the middle of May. Customer service was excellent. It was at our place in a few days. I’ve been out of town so I’ll set them up soon. They’re to take a fiberglass canopy off our Dodge truck. Doug 634533



- CJ74
by:

I am very pleased with the product. The price was very good. I thought it was going to be a lot higher. Also delivery was very fast. I ordered it on Monday and I had it on Wednesday. I am sure I will do business with etrailer again. Thank you. 620109



- CJ74
by:

I'm using them for my camper shell. And I leave the shell sapped to it for storing it. Works real good. 607686



- CJ74
by:

Amazing, worked better than the rental units I used to use; high quality construction sturdy and easy to assemble, 100% satisfied. 606148



- CJ74
by:

I sold and maintained R.V.'s for many years and had experience with the Brophy Jacks so I knew exactly what I was looking for when I ordered these. These jacks are easy and safe to use if instructions are followed. I have a small camper that had hydraulic jacks. These were always in the way when using my vehicle in the bush and in tight spots. Now I use the Brophy Jacks to load/unload my camper and then to load/unload the truck canopy. When working, we made a "Bed Rail" dolly. We could load a camper onto this dolly and move it anywhere on the lot that we wanted as the jacks will go close to the ground. A well made and useful product. I have a jacked up Tundra so the extra length is helpful. Thank you. 582037


Comments
excellent as expected. no faults
Leslie S - 11/15/2019

63356

- CJ74
by:

Great product and delivered when promised. Lifted my camper shell off my 2005 F350 which had an 8 foot bed with no problem. I could have done it alone but had another person help to speed things up. 563144



- CJ74
by:

The teeth on the gears didn't last 2 months. Material they were made of our to soft. I had to replace both cranks. 562894



- CJ74
by:

This product is just what I expected. In fact it's a bit better because one of the legs folds for better storage. I used it to take the canopy off of my Ford F-250 so weight was not a problem. I was concerned it would not lift high enough to get it off and drop low enough to place on a plywood base with 6" wheels I made for the canopy. It worked just fine. It was very stable when up and easy to lower. The only negatives I have is the cost (a bit high) and a bolt was missing that keeps the cable from coming off the roller in the pole but this did not affect the operation. 485831



- CJ74
by:

The jacks work great for me. Fast delivery too. 457969



- CJ74
by:

Some of my parts were missing. Thanks to a website that gives s phone number for customer support I called and they sent the missing parts to me the next morning. etrailer will get more business from me that's for sure. Thanks for being the kind of company that has people that are helpful. 429543



- CJ74
by:

Well we just got them (very fast delivery) and haven't used them yet. We did get them put together and they seem very sturdy. We will try them out this weekend. 380847



- CJ74
by:

These worked perfectly to get the camper off my truck and hold it as storage. Also want to give a shout out to etrailer.com. Shipping was free and got to me super fast! Really helped. 280573



- CJ74
by:

The Jacks look well made, but UPS were rough on the shipping box, and the pipes broke threw the side of the box and were lost. Now UPS is going to pick up the box and what was left in it, You're sending me another set, wonder what UPS will do to it. Some day I would like to put my camper on. Have a Nice Day!!!! 274119


25
25

Ask the Experts about this Brophy Camper Jack

  • Manual Jacks to Lift a 2008 Bronco Polarino Truck Bed Camper
    Brophy Cable Camper Jacks - 67" Max Lift Height - 3,000 lbs - Qty 2 Item # CJ74 will work great with your 1,600 pound truck bed camper. Just make sure that the 67 inch maximum lift height is enough to get the camper into the truck bed. The brackets that lift the camper are 21-1/2 inches long so when properly placed at the center of gravity on the camper it will be balanced. It is recommended to have 2 people when operating the jacks so they lift evenly. For tie downs we have custom...
    view full answer...
  • Recommended Replacement Jacks for 2005 Lance 1191 Truck Camper
    I am not sure what model Atwood Jacks you currently have on your 2005 Lance 1191 Truck Camper, but I do have a replacement option that should work well. I recommend looking at the Brophy Cable Camper Jacks # CJ74. These have a combined weight capacity of 3,000 pounds but only require the use of 2 cable jacks. The lifting range on this system is 17 inches to 67 inches and they are operated by a hand winch. The price information will be listed on the product page. I have also attached...
    view full answer...
  • Will The Brophy Cable Camper Jacks Work With A Dually Truck?
    The Brophy Cable Camper Jacks - 67" Max Lift Height - 3,000 lbs - Qty 2 # CJ74 don't really stick out . They hold the camper pretty much flush with the edge of the camper. I went into our warehouse to measure for you and the 2x2 inch l bracket that holds the edge of your camper is 4-1/4 inches from the support pole. The outermost edge of that bracket is 6-1/2 inches from the pole. The issue you may face is that the tripod foot support is directly in line with that l bracket. It doesn't...
    view full answer...
  • Recommended Replacement Jacks For Lance 815 Truck Camper
    I recommend looking at the Brophy Cable Camper Jacks Item # CJ74. These are universal jacks that are sold in pairs. They have a combined maximum weight capacity of 3,000 lbs and a lifting range from 17 inches to 67 inches. The Brophy jacks have an overall height when assembled of 76 inches and are operated by a hand winch. I have attached a link to additional information.
    view full answer...
  • Truck Bed Camper Shell Jack Recommendation
    We have manual truck bed camper jacks like the Brophy kit part # CJ74 which will work great, but we do not have any electric ones at this time. These have a combined weight capacity of 3,000 lbs and a lift range of 17 to 67 inches.
    view full answer...
  • Troubleshooting Rear Wheel Clearance Issue with Brophy Cable Camper Jacks
    You should be able to change the orientation of the Brophy Cable Camper Jacks # CJ74 so that the legs pointing towards the cab of your pickup and the other legs will sit under your pickup bed a little to help stabilize your camper. I have attached a picture to show what I am talking about. If you have the legs that point towards your tailgate clearing the tires then odds are you need to swap what sides they are on. If you did already try this let me know and I can help you further.
    view full answer...
  • Recommended Truck Bed Camper Jack for 2011 Ram
    If you are looking for truck bed camper jacks for your 2011 Ram, I recommend looking at the Brophy Cable Camper Jacks # CJ74. These will allow you to easily load or unload your truck camper with just a pair of portable jack assemblies. They have a lifting range of 17 to 67 inches and a combined weight capacity of 3,000 pounds. The overall height when assembled is 76 inches. I have attached a link that will take you to our available selection of truck camper jacks that you can also look...
    view full answer...
  • Replacement Jacks For A Lance 815 Truck Bed Camper
    I do have options available for you however, we only offer universal jacks sold in pairs not single replacement jacks for your Lance 815 truck bed camper. If the universal jacks are something you would like to consider, I recommend using the Brophy Cable Camper Jacks part # CJ74. The Brophy jack have a maximum weight capacity of 3,000 lbs. and can lift the camper from 17"-67". They stand 76" tall and are a non-permanent removable option.
    view full answer...
  • What is the Height Range of the Brophy Cable Camper Jack Set CJ74
    The height range possible with the Brophy Cable Camper Jack Set # CJ74 tops out at 67-inches maximum down to a minimum of 17-inches, giving it a 50-inch operating range. The kit offers a 3000-lb total weight capacity and a 4-to-1 winch gear ratio. For safety always use the jacks on level ground.
    view full answer...
  • Using CR Brophy CJ74 Camper Jacks to Lift Heavy Camper Shell
    As long as the camper shell weighs less than the 3,000 lb capacity of the # CJ74 Camper jacks, you should only need one set. The lift bracket itself is 26-1/2 inches long, so be sure to place the brackets at the center of gravity of the camper shell so it'll be balanced once it's up on the jacks. If the camper shell is heavier, using 2 stes would be recommended.
    view full answer...
  • Can In-Bed Camper Jacks be Used to Lift Off Truck Camper Shell
    The L-Bracket on the Brophy Cable Camper Jacks # CJ74 would need to slide under your camper shell on either side and then you would use the winches to help raise the camper shell off of your Ford F-350. You can use 2x4s if you want to but really the camper jacks can handle the weight so it really boils down to finding a way to stabilize your camper shell. Since these camper jacks were designed to be used for an in-bed truck camper I'm not sure if I have any pointers for your application...
    view full answer...
  • Recommended Truck Bed Camper Jacks for a 1996 Northern Lite Camper
    The only truck bed camper jacks we offer are the Brophy Cable Camper Jacks. As long as the loaded weight of your truck bed camper does not exceed 3,000 lbs then I recommend part # CJ41 for 57" of lift or part # CJ74 for 67" of lift. These jacks will do an excellent job of helping to load and unload your camper into the truck bed. They do not permanently install on the camper which makes for a very clean look and they can also be broken down into three pieces for easy storage.
    view full answer...
  • Jack Needed to Support Slide Out on 2018 Passport 2810BH with No Rails Under Slide Out
    Since you don't have the rails under your slide out the typical slide out supports like part # UF19-960003 wont' work but we do have another possible solution for you. Brophy has some camper jacks that are meant to be used for supporting a truck bed camper but when I spoke with my contact at Brophy she said you could use them for your slide out too. These come in varying weight capacities and max heights so you would just need to choose one that fits your application. Please note...
    view full answer...
  • Dimensions Of Replacement Handle for Brophy Cable Camper Jack
    The Replacement Handle for Brophy Cable Camper Jack part # 1007 is 1/2" long by 3/8" wide. The overall length of the handle is 9-1/4" long and the straight portion of the handle is 6-3/4". It is designed to replace the Brophy cable camper jacks part # CJ31 part # CJ41 and part # CJ74. However, I have attached a diagram for you to compare this handle to your handle. This is the only camper jack handle that we carry that is this design.
    view full answer...
  • 57 or 67 Inch Tall Brophey Camper Jack Recommendation
    If it were me I would go with the taller 67 inch Brophy jacks part # CJ74. Having more height than needed would be better than not having quite enough. Plus your truck does sit taller than most similar sized trucks so the extra height would be beneficial.
    view full answer...
  • Troubleshooting Happijac Camper Jacks Making Clicking Noise and Not Raising or Lowering
    The clicking you described hearing on your Happijack 4150 System along with the fact that they aren't raising or lowering the camper might actually be the result of a weak power source. I first recommend simply checking to make sure that the battery being used is fully charged and that all your wiring is still secure. Check for any pinched or exposed areas of wire that need to be replaced and verify that your ground is securely attached to a clean bare metal surface. If everything looks...
    view full answer...
  • Replacement for Older Happijac Truck Bed Camper Jack
    Thanks for the photo and that model of Happijac is nearing a quarter-century old as of this writing and there are no longer replacement parts available for it. The best option we can offer are new camper jacks, the Brophy Cable Camper Jacks and you will select the right one based on the weight capacity and maximum lift height you need. - 1,000 lbs: Brophy Cable Camper Jacks - 57" Max Lift Height # CJ31 - 1,500 lbs: Brophy Cable Camper Jack - 67" Max Lift Height # CJ74H - 3,000 lbs:...
    view full answer...
  • Comparing Brophy CX74 and CJ74 Camper jacks
    While the pipe diameters are the same the rest of the Brophy Cable Camper Jacks # CX74 and # CJ74 are different. The tripod bases have different bracing and the winch mount that has the angle iron section welded to it has different bracing as well.That's why the CJ74 has a 3,000 lb capacity and the CX74 has a 4,000 lb capacity.
    view full answer...
  • Diameter of Tripod Base for Brophy Cable Camper Jacks
    I measured the inside diameter of the Replacement Tripod Base for Brophy Cable Camper Jacks # 1106 and found it was 2 inches. This base is a replacement for the Brophy Cable Camper Jacks - 57" Max Lift Height # CJ41 and 67" Max Lift Height # CJ74.
    view full answer...
  • Truck Camper Jack Availability
    For truck bed campers we have jacks like the Brophy Camper Jack part # CJ74 which can do up to 67 inches of lift and 3,000 lbs but we do not have any powered option.
    view full answer...

Do you have a question about this Camper Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality camper jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Edited by:
Lindsey S
Installed by:
Kathleen M
Installed by:
Randy B
Video Edited:
Dustin K
Written by:
Chelsea B
Updated by:
Sarah W
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.