Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Getting your camper on and off the truck doesn’t have to be a struggle. This cable jack raises up to 57" using a hand-cranked winch with a 3:1 gear ratio, giving you steady lift control for up to 1,000 lbs. The aircraft-grade cable and safety latch keep everything secure while you work, so every lift feels smooth and reliable.
No need to bolt anything down or live with bulky gear hanging off your camper. This jack’s three-piece design sets up quickly and breaks down just as fast for storage. When you’re done, simply disassemble it and tuck it away. It’s a clean, portable solution that’s ready to go whenever you are.
Nothing’s worse than a shaky setup when you’re loading or unloading. The sturdy tripod base spreads out the weight of your camper evenly, while the large footplate helps prevent sinking or tilting on soft ground. Together they give you a solid, balanced lift every time.
This jack is made for real-world use. The upright pole is galvanized for corrosion resistance, and the tripod base and lift bracket are both black powder coated. That combination holds up against dirt, moisture, and road grime so you can count on it season after season.
The L-shaped lift bracket supports both the bottom and sides of your camper for better stability while raising or lowering. Two jacks used together keep the lift even from side to side, and one person can easily operate them in small increments if needed. Simple, steady, and dependable for every setup.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Brophy Cable Camper Jack. This is a single jack that's going to help you load and unload your truck bed camper. Now, when you're using jacks, you're always gonna need to use them in a pair. So, this is great option if you're needing to replace one of the two original, or if you're wanting to add a third jack, just for some extra stability.
But this cannot be used on its own, so you will need at least one other one as well. This does have a weight capacity of 1000 pounds. And that is of course, when you're using it with a pair. So, it won't have that full weight capacity itself. But, once you have it paired up with another one, you'll be able to lift and hold 1000 pounds.
It's got a lifting range of 17 inches up to 57 inches. I'm about six foot three. So if that gives you an idea of where this is gonna stand. It does have this extra tall pole that's going to help clear your truck beds on your pickup. So, it's going to make it very easy for you to get that truck bed camper out, no matter how tall those bed rails are.
The overall height when assembled is about 63 inches. Gives you an idea there, of the height you're working with. This is a portable design. So, it can be disassembled into three different pieces. You've got your foot piece here, your upright pole, and then your bracket here, your lift bracket.
So those three can be disassembled for storage or transport. So, instead of having to permanently install a jack on your camper, this will allow you to only use it when you need it. But only have it there when you need it. So this L shape the bracket here is what's going to support your camper. So, you'll sit the bottom inside of your camper here, in this L shape bracket. This is 21 and a half inches long, two inches wide, and two inches tall. So, very easy to put in place under your camper. That's gonna support that weight. Then the hand winch here. It's going to allow you to easily lower or, raise the jack. It's got a gear ratio of three to one. So, it's pretty quick. Of course, I don't have any weight on here, but this is going to very easily allow you to raise and lower your camper. Once you have it off your truck, you can lower it down, lift it back up when you're ready to get your truck back under it. Now, this does have the safety latch, that's gonna keep the cable from free spooling. And then the plastic handle here is going to make it very easy to keep your grip, as you're rotating that around. The tripod base is going to give us some extra width here. So it's going to just evenly distribute the camper's weight. Help eliminate that front to back and side to side motion. You can see we have the large foot plates there, that are gonna help prevent this from sinking and tilting. But of course, you always wanna make sure that you're gonna be using this on level ground. This does have a durable, corrosion resistant construction. The tripod base and the lift bracket both have a black powder coat finish to them to help resist rust and corrosion. Our upright pole is galvanized. And our cable is an aircraft grade cable, so it is gonna be very strong and durable. This jack is made here in the USA, so you can trust it's gonna be made to the quality standards we've come to know and trust for products that are made here in the US. So if you are looking to replace your original, one of your original jacks, or like I said, adding on a third one, this is gonna be a great option for you. So, that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Ratings & Reviews
Nick S.
12/29/2025
That is great to hear, looks nice on the setup. What kind of truck are you using that camper with?
Brian
8/5/2023
After a year of use the jacks are absolutely perfect for lifting my 1968 Alaskan NCO Camper. Easy to use and easy to set up. Etrailer is the best source for camper needs hands down.
Gwendolyn Y.
7/21/2025
Your truck camper looks great, Bryan! How long did it take for you to build it?
Victoria H.
2/20/2025
Thank you for including all of the photos, Dan! You made it look easy! I once had to help remove the camper shell off my step-dads pick up, and it took four of us to complete the job. Are you permanently removing the shell, or just for the season?
Tom
2/17/2023
One year later and the jacks are still great. Easily lifts the camper. Easy to store between uses. Other options I looked at back when I bought these were much more expensive and I am very happy I got these.
Melissa A.
11/21/2023
The Camper stands I purchased a year ago have been fantastic! They are holding up very well in the multiple times Ive used them. Quality product! I recommend to others to purchase.. I do offer that these stands are best implemented with 2 people for accurate balance and lifting.. :
Victoria H.
3/27/2025
Hi Milo, this doesn't sound like a good experience at all. Please let me try to help take care of this for you. There is a 1 year limited warranty on this. I'll make sure the information you'll need is sent to you.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Lazer S.
12/2/2025
Glad it's working well for you, Tony! Hopefully they didn't hurt your beer and pizza fund too much! : P Are going to be doing any restoration top your camper? Has a pretty cool vintage patina as it is, but always curious when I see older stuff like this. Also, is that a C10 or C20?