Diameter of Tripod Base for Brophy Cable Camper Jacks

Question

Question:

What diameter jack leg will the below tripod base accept Replacement Tripod Base for Brophy Cable Camper Jacks Item # 1106

asked by: Jack D

0

Expert Reply:

I measured the inside diameter of the Replacement Tripod Base for Brophy Cable Camper Jacks # 1106 and found it was 2 inches.

This base is a replacement for the Brophy Cable Camper Jacks - 57" Max Lift Height # CJ41 and 67" Max Lift Height # CJ74.

expert reply by: Kyle S

0

Answer 1

Hey Grace, thanks for reaching out! The Brophy Camper Jacks #CJ31 has a 1,000 lb weight capacity for the pair, they can easily handle a cap that weighs around 200 lbs. The main thing you'll want to check is that there is enough room for the jack…

view full answer...

Answer 2

The diameter of the pole that will fit into the Replacement Tripod Base for Brophy Cable Camper Jack - Qty 1 #1003, is 1-1/2 inches. So, it appears this will work for your application.

view full answer...

Answer 3

We have excellent options for replacing your truck bed camper jacks but we do not have a way to get the gears you'd need for the jacks that you currently have. Based on that you'd want the Brophy Cable Camper Jacks #CJ31 which has a 1,000 lb…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 6

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 7

Thanks for your question, Steve. Installing the Timbren Rear Suspension Enhancement System #T76FR wouldn’t eliminate the need for a weight distribution system if your setup calls for one, they actually serve two different purposes. A weight…

view full answer...

Answer 8

Hey Barry, we have the Curt tow bar lighting kit part #C96JR that is a confirmed fit for your 20221 Jeep Gladiator and is a simple plug in type install like what you are looking for. Then for a charge line to make sure your Gladiator battery is…

view full answer...

Answer 9

The tires you have on your trailer now have a radial ply construction which is great for long highway hauls but if you plan to go off-roading then you are going to want to switch to a bias ply construction which will still wok just fine on the…

view full answer...

Answer 10

Out of the two Curt Trailer hitches, I recommend The Curt Trailer Hitch #C74DR. I like this hitch over the other Curt hitch because it has a more traditional installation and will attach to the frame of your 2023 Jeep Gladiator Rubicon when the Curt…

view full answer...

Answer 11

Hey Mark! The capacity of the TRED GT Camper Leveler with 2 Wheel Chocks and 4 Jack Pads #RR74AP is 5,000 kg so just over 11,000 lbs. That rating is per pair. What will you be using the levelers for?

view full answer...

Answer 12

Hi Blaise, If you’re looking for a better tire for highway travel, I’d go with a radial trailer tire rather than a bias tire. Radial trailer tires generally provide a smoother ride and longer lifespan for highway use. The Taskmaster 5.30R12 Radial…

view full answer...

Diameter of Tripod Base for Brophy Cable Camper Jacks

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching