Tie Down Straps

Hey William, If you have a Torklift tie down setup for your camper you would want to use turnbuckles that have springs built in like the Torklift Basic SpringLoad part #TLS9000 that you referenced on all four corners. What tie downs do you have?

Hi Clint, welcome back The HappiJac Original Turnbuckles for Camper Tie-Downs - Stainless Steel - Qty 4 #LC182898 are likely what you are looking for and will be a good in between option (they are actually pretty nice and should last a good long…

Hey Claude, there isn't a replacement grease cap made for the part #RG04-230 but there's also no reason you couldn't use this cap with a grease setup. It would work just fine for that application.

Hey Neal! You can use the standard 5/8" Hitch Pin and Clip #e47RV for quicker installation and removal, or the Locking Hitch Pin #e98882 if you want to keep the carrier secured to the vehicle. Either way, you will lose the built-in anti-rattle…

Hey Doyle, welcome back! The push-button mechanism on the Benton MoveHitch Cargo Carrier #B86VR and #B38VR (with cargo net) is very reliable and has been thoroughly tested. It is actually one of the best features of the MoveHitch since it makes it…

Hi! The usable space on the Benton MoveHitch Cargo Carrier, Part #B38VR, measures 24 inches deep by 60 inches wide with 3 inch tall side rails. That gives you a nice, roomy platform for things like coolers, generators, camping gear, totes, or other…

Yes, you can use the factory trailer connector on your 2015 Nissan Titan to power the third brake light on your Leer camper shell. That said, they don't make a plug and play harness for this so you will need to do some wiring but no splicing into…

Hey Roger, I was able to pull up the dimensions of the battery you have now and found that the Bright Way replacement battery part #3801250 is exact same dimensions and is also a 5 amp hour battery so it would work great for you.

Hi Brian, If your 2023 Toyota 4Runner doesn't have a tow package but has the 4-way and 7-way connector on the back, you should have a wiring harness run to the 4/7-way. They don't include the custom harness or brake controller to connect to…

The mounting bolts that come with the CargoBuckle G3 Retractable Ratchet Tie-Down Straps #IMF18800 are 3/8" diameter x 1-3/4" long. I have attached a review video of these straps for you to check out as well.

Great question Jake, The Pace Edwards JackRabbit part part #311-M-JRFA05A28 will not work with your System One Contractor Rig ladder rack, but the Pace Edwards Full-Metal JackRabbit with Explorer Series rails part #311-FEFA05A28 is the version I…

Hello Dennis, That is definitely something you will want to check with your setup. The B&W Continuum #BW78FR will sit about 9 inches below your trailer frame once installed, so you will want to measure from the ground to the bottom of the frame…

Hey William, If you have a Torklift tie down setup for your camper you would want to use turnbuckles that have springs built in like the Torklift Basic SpringLoad part #TLS9000 that you referenced on all four corners. What tie downs do you have?

Hi Clint, welcome back The HappiJac Original Turnbuckles for Camper Tie-Downs - Stainless Steel - Qty 4 #LC182898 are likely what you are looking for and will be a good in between option (they are actually pretty nice and should last a good long…

Hey Claude, there isn't a replacement grease cap made for the part #RG04-230 but there's also no reason you couldn't use this cap with a grease setup. It would work just fine for that application.

Hey Neal! You can use the standard 5/8" Hitch Pin and Clip #e47RV for quicker installation and removal, or the Locking Hitch Pin #e98882 if you want to keep the carrier secured to the vehicle. Either way, you will lose the built-in anti-rattle…

Hey Doyle, welcome back! The push-button mechanism on the Benton MoveHitch Cargo Carrier #B86VR and #B38VR (with cargo net) is very reliable and has been thoroughly tested. It is actually one of the best features of the MoveHitch since it makes it…

Hi! The usable space on the Benton MoveHitch Cargo Carrier, Part #B38VR, measures 24 inches deep by 60 inches wide with 3 inch tall side rails. That gives you a nice, roomy platform for things like coolers, generators, camping gear, totes, or other…

Yes, you can use the factory trailer connector on your 2015 Nissan Titan to power the third brake light on your Leer camper shell. That said, they don't make a plug and play harness for this so you will need to do some wiring but no splicing into…

Hey Roger, I was able to pull up the dimensions of the battery you have now and found that the Bright Way replacement battery part #3801250 is exact same dimensions and is also a 5 amp hour battery so it would work great for you.

Hi Brian, If your 2023 Toyota 4Runner doesn't have a tow package but has the 4-way and 7-way connector on the back, you should have a wiring harness run to the 4/7-way. They don't include the custom harness or brake controller to connect to…

The mounting bolts that come with the CargoBuckle G3 Retractable Ratchet Tie-Down Straps #IMF18800 are 3/8" diameter x 1-3/4" long. I have attached a review video of these straps for you to check out as well.

Great question Jake, The Pace Edwards JackRabbit part part #311-M-JRFA05A28 will not work with your System One Contractor Rig ladder rack, but the Pace Edwards Full-Metal JackRabbit with Explorer Series rails part #311-FEFA05A28 is the version I…

Hello Dennis, That is definitely something you will want to check with your setup. The B&W Continuum #BW78FR will sit about 9 inches below your trailer frame once installed, so you will want to measure from the ground to the bottom of the frame…