See what our Experts say about this CURT Trailer Hitch Ball Mount

• Recommended Hitch for a 2024 Subaru Crosstrek Wilderness
  It sure does! The etrailer Hitch item # e98912 has been confirmed to fit the 2024 Subaru Crosstrek Wilderness.This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525 lbs maximum tongue weight. I really like the etrailer hitch item # e98912 because the crosstube mounts behind your rear bumper leaving only the 2" receiver exposed. This not only looks better but it helps with ground...
  view full answer...
• Trailer Hitch Receiver and 4-Way Vehicle Wiring Harness For a 2024 Kia Niro
  We have the Curt Trailer Hitch Receiver # C77NR which is custom fit for your 2024 Kia Niro. This will give you a 2" receiver opening for a large selection of Ball Mounts # C45534 and hitch mounted accessories like a Bike Rack # NV22G. The Curt Powered Tail Light Converter # C59236 will provide you with a 4-way flat trailer connector. This is the connector most commonly found on small trailers. It will also allow for Auxiliary Lights # C53201 should your hitch mounted accessory impair...
  view full answer...
• What Hitch Do You Recommend for a 2024 Toyota RAV4?
  To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item # e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600 lbs maximum tongue weight. I really like the etrailer hitch item # e23ZR because it installs behind your rear bumper and the crossbar is completely hidden. I have linked an installation video below to show you how to get this hitch set up. If...
  view full answer...
• Does the Curt Hitch C46DR Fit a 2024 Nissan Pathfinder?
  Yes, it does! The Curt Hitch item # C46DR has been confirmed to fit the 2024 Nissan Pathfinder. This hitch is custom fit and bolts to your Nissan with included hardware. It is a class III hitch with a 2" receiver, that has a 6,000 lbs towing capacity, and a 900 lbs maximum tongue weight. I really like the Curt item # C46DR because of the way it installs. The crosstube is completely concealed by the rear bumper of your Pathfinder. This leaves only the 2" receiver visible which not only...
  view full answer...
• Recommended Hitch for a 2024 Volvo XC60 Recharge
  Yes, it does! The Curt Hitch item # C92WR has been confirmed to fit the 2024 Volvo XC60 Recharge. This hitch is custom fit and bolts to your Volvo with included hardware. It is a class III hitch with a 2" receiver so it will work with almost every bike rack on the market. I really like the Curt Hitch item # C92WR because the crosstube mounts behind your rear bumper cover leaving only the 2" receiver visible. This not only helps with ground clearance but it also looks better. I have...
  view full answer...
  
• Will Draw-Tite Hitch Work With 20 Inch Spare on 2021 Jeep Grand Cherokee L Summit
  Hi Joe; just like the Curt # C96NR, the Draw-Tite Max-Frame Trailer Hitch Receiver # DT42GR does not allow for a 20" spare tire. However, we do have the Blue Ox Trailer Hitch Receiver # BLU46HR. I just reached out to Blue Ox and they said it will accommodate the larger spare. This fits the 2021-2025 Jeep Grand Cherokee L so you can install it on your 2021 Summit L. Are you going to use the hitch for towing? If so, you will also need the Curt T-Connector Vehicle Wiring Harness # C27BR....
  view full answer...
• Recommended Hitch for a 2024 Acura RDX
  Yes, we do! To add a hitch to your 2024 Acura RDX, I recommend the etrailer item # e72AR. This hitch is custom fit and bolts to your Acura with included hardware. This is a class III hitch with a 2" receiver that has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight. I really like the etrailer Hitch item # e72AR because the crosstube installs behind your rear bumper leaving only the 2" receiver visible. This not only looks better but also helps with ground clearance. If...
  view full answer...
• Recommended Hitch for a 2024 Jeep Grand Cherokee 4xe
  Yes, there is. To add a hitch to a 2024 Jeep Grand Cherokee 4xe you will want the Curt Trailer item # C96NR. This hitch is custom fit and bolts to your Jeep with included hardware. This is a class III hitch with a 2" receiver. It has a 7,500 lbs towing capacity and a 750 lbs maximum tongue weight. I have attached a couple of pictures below along with an installation video to help you get this hitch set up and show you what it looks like once installed. If you are planning on towing you...
  view full answer...
  
• 2022 Acura MDX Hitch Receiver and Spare Tire Space
  I will be happy to clear up the confusion for you. The Curt Trailer Hitch Receiver item # C22HR you referenced and the Draw-Tite Max-Frame Trailer Hitch Receiver item # DT42MR will only accommodate the 18" spare on your 2022 Acura MDX. These are the only two hitches available for your 2022 MDX and both have the same dimensions and limitations when it comes to room for your spare tire. The spare tire mounted on the 20" wheel will not fit. Both of these hitches are custom fit and bolt directly...
  view full answer...
  
• Best Hitch for a 2021 Toyota Highlander XSE
  Yes, I can! Our fitguide gets confusing like that so I'll be happy to clarify for you. All four hitches you were looking at fit both the XSE and non-XSE models of the 2021 Toyota Highlander. The best one is going to be the TowSmart Trailer Hitch item # TS56VR. This hitch has been confirmed to fit the 2021 Toyota Highlander XSE. It is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver that has a 5,000 lbs towing capacity and a 500 lbs...
  view full answer...
• How to Add 7-Way Wiring on a 2021 Ford Bronco
  To add a 7-Way to your 2021 Ford Bronco you will need a 4-Way kit like the recommended T-One # TK99VR and then the Universal Wiring Kit # ETBC7. The T-One plugs in behind the tail lights of your Bronco and gives you the standard light functions while the ETBC7 comes with everything you need for a fully functional 7-Way. Usually we only see 7-Ways with OEM connections for trucks so your anything smaller than a truck you usually have to install a 4-Way and then an additional kit like what...
  view full answer...
• Recommended Trailer Hitch For A 2025 Honda Pilot Elite
  Hello Hoan, thanks for reaching out. I double checked with the manufacturer, and they confirmed that yes, the etrailer Class 3 Hitch # e27KR will indeed fit the 2025 Honda Pilot Elite. It will be a no drill install and you will not need to cut any of the underbody panels. Keep in mind that the hitch will fit with a mini spare tire stowed under the vehicle but does not fit with a full-size spare. Also, the receiver can interfere with the hands-free liftgate sensor. In most cases, the sensor...
  view full answer...
• Recommended Hitch for a 2024 Audi Q5 Plug-In Hybrid
  Yes, it does! The etrailer Hitch item # e94CR has been confirmed to fit all models of the 2024 Audi Q5 including the plug-in hybrid model. This hitch is custom fit and bolts to your Audi with included hardware. It is a class III hitch with a 2" receiver. I really like the etrailer item # e94CR because the crosstube mounts behind your rear bumper cover leaving only the 2" receiver visible. This not only looks better but also helps with ground clearance. I have linked an installation...
  view full answer...
• Recommended Wiring Harness for a 2025 Volvo XC60 Plus
  Unless you enjoy cutting and splicing wires, I strongly recommend going with the Curt T-Connector Vehicle Wiring Harness item # C84RJ over the item # C59236. The Curt item # C84RJ is custom-fit and plugs into your Volvo's wiring harness in your rear cargo area. The Curt item # C59236 is a universal harness that splices in manual to the tail light wiring. The Curt Hitch item # C92WR, you referenced, is confirmed to fit the 2025 Volvo XC60 Plus. It is a class III hitch with a 2" receiver...
  view full answer...
• Recommended Hitch for a 2024 Toyota Grand Highlander
  Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item # C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. I really like this hitch because the entire crosstube mounts behind the rear bumper. This leaves only the 2" receiver exposed which not only looks better but helps with ground clearance....
  view full answer...
  
• Recommended Hitch for a 2023 Honda Passport
  The best hitch for your 2023 Honda Passport is going to be the Curt Hitch item # C13421. This hitch is custom fit and bolts to your Honda with included hardware. I really like the Curt hitch because it tucks up underneath your rear bumper cover nicely leaving only the 2" x 2" receiver visible. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity, and a 750 lbs maximum tongue weight. I have linked a couple of pictures below along with an installation video so...
  view full answer...
  
• What is the Best Hitch for a 2024 Toyota Sienna?
  The best hitch for a 2024 Toyota Sienna is the Curt item # C22UR. This hitch is custom fit and bolts to your Toyota with included hardware. It is a class III hitch with a 2" receiver that has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight that can be increased to 5,000 lbs and 500 lbs when used with a weight distribution system. The reason the Curt item # C22UR is the best hitch for your Sienna is not only its high towing capacity but the position of the receiver. The...
  view full answer...
  
• Recommended 7-Way Connector and Brake Controller for a 2023 Kia Sorento w/ the Factory Tow Package
  Yes, you can Michael. The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package item # C68JR is exactly what you need to use the Curt Echo Wireless Brake Controller item # C51180. It will provide all the power you need to operate your trailer's brakes. No, additionally wiring is necessary. I have linked an installation video below that will show you how to get the Curt item # C68JR installed. I recommend using the No-Drill Mount for Electrical Mounting Bracket - long item...
  view full answer...
• Recommended Trailer Wiring for a 2019 Ford Edge
  Hey Patrick! There are two options to add wiring to your 2019 Ford Edge depending on what model you have and both are custom fit. I have listed them below: Titanium and ST - Curt T-Connector Vehicle Wiring Harness item # C73FR SEL or SE - Curt T-Connector Vehicle Wiring Harness item # C89FR These custom-fit T-connectors plug into your Edge's wiring harness, which is located behind the tail lights. I have linked a couple of installation videos below to show you how to get them set up. The...
  view full answer...
• Recommended 7-Way Connector and Brake Controller for a 2019 Toyota Highlander
  Hey Nancy, thanks for the information. I have all the parts you'll need but there's no way to install a 7-way connector or a brake controller in your 2019 Toyota Highlander without cutting and splicing wires. I do have a way that will allow you to keep your 4-way connector though. To add a 7-way connector, you'll need the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your...
  view full answer...
• Recommended Hitch for a 2024 Kia Soul
  To add a hitch to your 2024 Kia Soul, I recommend the Draw-Tite item # DT25GR. This hitch is custom fit and bolts to your Kia with included hardware. It does not fit the 1.6L turbo model. This is a class III hitch with a 2" receiver. It has a 2,000 lbs towing capacity and a 300 lbs maximum tongue weight. I really like the Draw-Tite hitch item # DT25GR because the crosstube mounts behind your rear bumper leaving only the 2" receiver exposed. This not only looks better but it helps with...
  view full answer...
  
• Does the Curt Hitch C13409 Block the Liftgate Sensor on a 2025 Subaru Forester?
  Hey Will thanks for the question! The Curt Hitch item # C13409 is compatible with the automatic tailgate switch on your 2025 Subaru Forester. You'll lose some of the sensors range around the 2" receiver but you're not going to want to be kicking in that area anyways once you get it installed. What do you plan on using your hitch for? If you are planning on towing you will also need a wiring harness item # C56040 and a ball mount kit item # C45534. I recommend using the No-Drill Mount...
  view full answer...
• Recommended Hitch for a 2018 Mercedes GLE 350
  Curt doesn't make hitches with detachable receivers. The only one they offer that fits your 2018 GLE 350 that does not require trimming is their item # C13294 you were looking at. The Curt Hitch item # C13294 is custom fit and bolts to your Mercedes with included hardware. It is a class III hitch with a 2" receiver. It has a 7,500 lbs towing capacity and a 750 lbs maximum tongue weight. I really like the Curt item # C13294 because it installs behind your rear bumper cover leaving only...
  view full answer...
• Does the Curt Hitch 13493 Fit a 2024 Ford Bronco?
  Yes, it does. The Curt Hitch 13493 or our part number item # C76WR is confirmed to fit the 2024 Ford Bronco. This hitch is custom fit and bolts to your Bronco with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and 350 lbs maximum tongue weight. I really like this hitch because of how easy it is to install it. You only have to install four bolts to your rear bumper to get this hitch set up. I have linked an installation video below along...
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?