Meyer Blaster 350S Motorized Professional Salt Spreader w/ Vibrator - Tailgate - 6.5 Cu Ft

See what our Experts say about this Meyer Salt Spreaders

• What Is Max Load Rating Of Meyer Blaster Salt Spreaders ME48FR And ME98FR ?
  Excellent concern, Steve. The Meyer Blaster Salt Spreader for 2" receivers # ME98FR is rated for about 350 lbs load capacity, while the Blaster # ME48FR is built for heavier work and is rated for 750 lbs. That means # ME48FR is more suitable for intensive commercial or large-property use, while # ME98FR fits a strong 1/2-ton setup for residential or light commercial jobs. What’s the tongue load rating of your hitch and how much salt do you expect to carry at once? We can check whether...
  view full answer...
• Will Meyer Blaster 350S Motorized Professional Salt Spreader ME98FR Work For Traction Sand?
  Hey Chris, thanks for reaching out. Living up in Alaska, you know better than anyone that sand can turn into concrete the moment it gets a little moisture and cold in it. The Meyer Blaster 350S Motorized Professional Salt Spreader # ME98FR is exactly what you want for pulling traction sand straight from a pile. It’s built with a heavy-duty vibrator to shake down that stubborn, wet material so it doesn’t bridge or clump up on you, and the brush auger does a great job chewing through the...
  view full answer...
• Which Tailgate 2" Receiver Mounted Salt Spreader Is Going To Work With Wet Sand / Salt Mixes ?
  Michelle, great question - the Base Line 240 # ME86FR and 400 # ME26FR handle dry or slightly damp rock salt and calcium blends well, but they’re not ideal for heavy, wet sand or thick mixes. That’s where the Blaster units # ME98FR and # ME48FR shine: their brush-style auger and built-in vibrator keep sticky materials moving instead of bridging in the throat. If you’re running mostly dry bagged mix, the Base Line will serve you fine if you’re loading bulk material from a pile, I’d lean...
  view full answer...
• Do Meyer Tailgate And Hitch Mount Salt Spreaders Come With Vibrators To Prevent Clogging?
  Jorge - you heard right. The Blaster lineup # ME98FR and # ME48FR includes a built-in vibrator to keep material flowing, especially when the salt or ice melt tends to cake or bridge. In wet or semi-frozen material, that vibrator helps prevent clogging in the throat or auger. The Base Line series #ME86FR and # ME26FR rely on a coarse auger and consistent motor drive, though their controller does include a vibrate mode if you add the optional vibrator kit later. The Blasters do come with...
  view full answer...
• Which Tailgate Spreader Is Best For 2" Receiver On 2019 Toyota Tacoma?
  Hey Ryan, great question. All five of those Meyer tailgate spreaders # ME86FR, # ME26FR, # ME98FR, # ME48FR are designed to mount into a Class III 2" × 2" receiver rated for at least 500 lbs of tongue weight, so your Tacoma’s hitch fits the standard requirement. That said, the Blaster 350S # ME98FR is the largest model suited for mid-size or half-ton trucks like yours. The Blaster 750RS # ME48FR is much heavier and should only be used on a 3/4-ton or larger full-size pickup, per Meyer’s...
  view full answer...
• How Does The Controller And Settings Differ Between Meyer Base Line And Blaster Salt Spreaders?
  Hey Brenda, for Base Line models like 6.3 Cu Ft # ME26FR and 3.7 Cu Ft # ME86FR, you get an in-cab touchpad controller with “fast, slow, vibrate” modes so you can tweak output without stopping (vibrator is not included with base line models). The Blaster models like 6.5 Cu Ft # ME98FR and 12.8 Cu Ft # ME48FR offer advanced controls, including a vibrator, blast mode (a surge of power) and automatic spinner shut off when braking, so you avoid waste at intersections. See photo on this page...
  view full answer...
• Does the Meyer Blaster 750RS Motorized Professional Salt Spreader Work w/ Calcium and Sand?
  Hey Robert. The Meyer Blaster 750RS Motorized Professional Salt Spreader item # ME48FR is exactly what you need for calcium and sand. It's got a brush-style auger and built-in vibrator that keeps materials moving instead of clogging up in the throat. Sorry but we do not sell the 36407 motor guard. What kind of truck do you have? You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.
  view full answer...
• Can I Use Different Size Pellets, Flakes, Or Fine Salt In Meyers Hitch Mounted Salt Spreaders?
  Yes Carla, but with caution. Meyer recommends free-flowing, dry materials for all models. On the Blaster models # ME98FR and # ME48FR, you do have accessory options: a hopper screen # ME29FR for 2" x 2", or # ME56FR for 1/2 " x 1/2" and a fine salt auger kit # ME38FR or fine-material brush auger kit # ME49FR to help handle smaller granules. Which product do you plan to spread - rock salt, flake, magnesium, or something custom? I can help you choose the right screen or auger to match.
  view full answer...
• Which Meyer Hitch-Mounted Salt Spreader Is Best For Sidewalks And Small Parking Lots?
  Denise, both could work, but here’s the simple split: -The Base Line 400 # ME26FR is lighter, easier to remove, and great for dry bagged salt on small lots or sidewalks. It sounds like this would be perfect for you. -The Blaster 350S # ME98FR adds more control and that built-in vibrator, which helps with bulk salt or mixed material. If you mostly stick to short routes and dry salt, the Base Line is perfect. For heavier commercial use or wetter conditions, the Blaster earns its keep. What...
  view full answer...
• Which Meyer Tailgate Salt Spreader Has A Better Brush Auger To Keep Salt Spreading Evenly?
  Hey Ed! Yes, the Meyer Base Liner salt spreader # ME86FR includes a coarse brush auger to prevent material from flowing prematurely into the throat, which helps reduce clogging. The Blaster models # ME98FR and # ME48FR take that further: they use a brush-style auger plus a vibrator to actively prevent bridging or packing, especially with denser blends. That combination tends to make the Blaster line better for tougher conditions where material wants to clump. Do you have more coarse...
  view full answer...
• Can I Tow Small Utility Trailer Behind Truck And Mount Meyers Salt Spreader To Truck Receiver?
  Laura, that’s a great question - and one a lot of folks overlook. The Meyer Blaster spreaders # ME48FR and # ME98FR fully occupy your 2" receiver and extend out past the bumper, so you won’t be able to tow a trailer while the spreader is installed. The hitch ball or coupler would be completely blocked. If you need to switch between towing and spreading, most users remove the spreader assembly when they need the receiver for their trailer. For smaller or lighter setups, the Base Line units...
  view full answer...
• Looking For Tailgate Mounted Salt Spreader For 2025 Ford F-250
  Hello Victor, thanks for reaching out. We do have tailgate mounted salt spreaders for the 2025 Ford F-250, but I am not seeing we have anything that matches all of your specifications. The closest I am seeing is the following: - Meyer Blaster 350S Motorized Professional Salt Spreader w/ Vibrator - Tailgate - 6.5 Cu Ft # ME98FR This has 6.5 cu ft capacity and it comes with tie downs. It has a built in vibrator and brush augur. No work lights or strobe lights though. None of our spreaders...
  view full answer...
• How Do I Wire Up The Meyer Blaster 350S To My Pickup's Battery?
  Cheryl, everything’s included. The # ME98FR harness plugs into the spreader, runs up to the battery, and ties one small lead to a keyed ignition source. It’s fused at 20 amps and pulls about 15–20 amps when both the motor and vibrator run. No other kits or relays are needed. Do you already have a pass-through in the firewall, or will you drill one for the controller lead?
  view full answer...
• What Is The Advantage Of Blaster 750RS Salt Spreader Compared To Smaller 350S For 2" Hitch?
  Colin, both Blasters share the same controller, built-in vibrator, and spread pattern - up to about 20 feet wide depending on your spinner speed and material. The difference comes down to capacity and duty cycle: the # ME48FR (750RS) holds almost twice as much material - 12.8 cu ft vs 6.5 cu ft - and is built for 3/4 ton or larger trucks that can handle the added weight. That means longer runs and fewer refills if you’re treating big lots. The # ME98FR (350S) gives you the same control...
  view full answer...
• Can Meyer Salt Spreader Be Added To Kubota L3901 Tractor With 3 Point Hitch?
  Brent, great question. You can absolutely run either the # ME98FR or # ME48FR on a compact tractor, but you’ll need Meyer’s separate 3-Point Hitch 2-Inch Receiver Spreader Mount part 36500 to make it work. It’s designed for a Category 1 3-point hitch and gives you the 2 inch receiver opening that these Blasters need. We don’t currently carry that mount, but Meyer lists it on their site. Do you already have rear remotes or a 12-volt feed for accessories on your Kubota? That’ll make wiring...
  view full answer...

Do you have a question about this Salt Spreader?