Does the Curt Hitch C46DR Fit a 2024 Nissan Pathfinder?

Question

Question:

Does the hitch linked below fit the 2024 Nissan Pathfinder? Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # C46DR

asked by: Mike K

0

Expert Reply:

Yes, it does! The Curt Hitch item # C46DR has been confirmed to fit the 2024 Nissan Pathfinder. This hitch is custom fit and bolts to your Nissan with included hardware. It is a class III hitch with a 2" receiver, that has a 6,000 lbs towing capacity, and a 900 lbs maximum tongue weight.

I really like the Curt item # C46DR because of the way it installs. The crosstube is completely concealed by the rear bumper of your Pathfinder. This leaves only the 2" receiver visible which not only works better but helps with ground clearance.

If you are planning on towing you will also need a wiring harness item # TK58VR and a ball mount kit item # C45534.

expert reply by: Jerred H

0

Uncle D.

4/16/2025

I bought this very hitch and the holes are 1/2 " out of whack. I`m 73 yrs old and not going to F--- around with this boat anchor. 2024 Pathfinder

Jerred H.

4/16/2025

@UncleD I don't blame you. Sorry to hear that. Hope you can return it and get your money back from where ever you got it from. We can take care of you though. For a 2024 Nissan Pathfinder, I recommend the Draw-TIte item # DT67GR. This is a class IV hitch with a 2" receiver. It has a 6,000 lbs towing capacity and a 900 lbs maximum tongue weight. It's quite a bit sturdier than the Curt item # C46DR. I've linked an installation video below along with the instructions so you can see how to get it set up. Where'd you purchase your hitch from?

Helpful Links

tv-install-draw-tite-trailer-hitch-2022-nissan-pathfinder-dt67gr.aspx

Answer 1

Hey Kerry, When we installed the Curt Trailer Hitch Receiver #C46DR on a 2022 Nissan Pathfinder we found that it measured 13" from the ground to the top inside of the receiver (see attached photo). This means the bottom of the receiver will be…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

Hello Ric, Thanks for writing in. The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C46DR is a great fit for your 2026 Nissan Pathfinder, and it will work just fine with the spare tire mounted underneath the vehicle. For…

view full answer...

Answer 8

Congrats on the new SUV Jeff! To tow a trailer with your new 2026 Nissan Pathfinder, you'll need the following parts: Hitch - etrailer Trailer Hitch item #e36ZV 4-Way Connector - Curt T-Connector Vehicle Wiring Harness item #C95ZV 7-Way Connector…

view full answer...

Answer 9

Thanks for reaching out, Dennis. Yes, if you purchase the Yakima LockNLoad Platform Roof Tray #Y05044 along with the Crossbar Clamps for Yakima LockNLoad Platform Rack #Y05039, you'll receive all of the hardware needed to assemble the tray and…

view full answer...

Answer 10

Hey Gina, thanks for reaching out. Yes, the Air Lift 1000 Air Helper Springs #AL63WQ will fit your 2025 Nissan Pathfinder Rock Creek. They're designed to install inside the factory rear coil springs and are a great option for helping reduce…

view full answer...

Answer 11

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 12

Hey Jeffrey, so we have just what you are looking for with the Prodigy P3 part #90195. This controller has an EOH setting to allow it to be used with the type of brakes your trailer will have and is widely considered to be the best controller on the…

view full answer...

Does the Curt Hitch C46DR Fit a 2024 Nissan Pathfinder?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching