To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Get consistent traction and a smooth ride when driving in snow and on light ice. Lightweight chains are quick and easy to install. Built-in tensioner lets you easily tighten chain without tools.
Features:
Specs:
Note: To determine whether you can use snow chains on your vehicle, or if chains might affect your ABS/EPS functionality, consult your owner's manual.
The Konig XD-16 Pro tire chains are great all-purpose, winter weather chains. If you live in an area where you're likely to get periodic snow and ice, these Konig chains are perfect because they're durable and easy to mount. If you're more likely to see seriously icy conditions, you may want a chain with V-bar links that can really bite into the ice to give you maximum traction.
These chains are among the easiest and fastest to install because they have built-in tensioners that you can just pull taut to adjust the fit. These tensioners allow the chains to fit your tires, no matter the profile or wear pattern. And because the tensioners are built-in, you never have to worry about losing them like you might with other chains on the market.
If you know your tire size, you may think you won't need to test fit your new chains. But there are a lot of variables that can affect whether chains will fit your specific tires, including your tire type, the amount of air pressure in the tire, the amount of tread wear, and the tire manufacturer. You'll also need to know how much clearance is in your wheel well, which you can determine by measuring from your tire tread to the sidewall of the wheel well.
We recommend that you order chains as early in the season as possible to give yourself plenty of time to test fit the chains and reorder if needed. This way, you won't be stuck out in the cold later with snow chains that don't fit.
You can test fit these chains in your garage or driveway, but you'll want to wait until there's snow on the ground to actually drive with them. Likewise, if you're out in the snow and come across bare pavement, you'll want to pull over and remove the chains. Even these low-profile chains can cause damage to the bare pavement, your garage floor, or your vehicle if they break from the wear of riding on a harsh surface.
Installing these chains is incredibly simple.
1. Lay out the chains on the ground to make sure there are no twists or kinks in them.
2. Slide the chain behind the tire and connect the ends of the blue cable, which will sit behind the tire.
3. Around front, connect the red hook to the red link.
4. At the bottom of the tire, feed the tensioning chain through the large clip and tug it until it's tight.
5. Feed the tensioning chain through as many red clips along the side chain as you can, leaving room to still be able to stretch the hook across the tire. Attach the hook to the side chain directly across from the last clip you ran the tensioner through. The hook should face away from your tire.
6. Drive forward around 325' (about the length of a football field) and stop. Check the chains and tighten them as needed.
Quick Tips:
To choose the right snow chain, you must match your tire size. Those measurements can be found on the side of your tire.
185/60-15
These chains fit the following tire sizes:
Comes in a small storage case.
Do you have a question about this Tire Chain?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.