See what our Experts say about this Yakima Accessories and Parts

• Replacement Tongue To Adapt Yakima HoldUp Bike Rack To 2 Inch Receiver Compatible
  For your Yakima HoldUp 2 Bike Rack for 1-1/4" Hitches - Platform Style - Tilting # Y02445, the Replacement 2" Hitch Adapter for Yakima Carriers # Y8890174 will not work according to my contact at Yakima and it is no longer available. Instead you would need the Replacement Tongue for Yakima HoldUp Bike Racks # 8880580 which will also allow you the ability to expand the rack using the Plus 2 2-Bike Add-On for Yakima HoldUp for 2" Hitches # Y02446 if you desire.
  view full answer...
• Quality Hitch Bike Rack Recommendation for 4 New Mountain Bikes with Disc Brakes
  Another 4 bike rack I would have you consider is the Yakima HoldUp, item # Y02443, along with the Plus 2 Adapter for HoldUp 2 Bike Carrier, 2 inch Hitches, item # Y02446. This rack is a wheel mount style for ease of loading and unloading the bikes and secures the bikes, keeping them from contacting each other or the back of the vehicle. This style is also a good choice for mountain bikes with suspensions because it is it does not compress the frame of the bike and wear the shocks.
  view full answer...
• Replacement Bike Tray Assembly for Yakima HoldUp Bike Racks
  The model number for a Yakima HoldUp bike rack like item # Y02443 will be on the rear side of the front cradle facing away from the vehicle as shown in the picture below. If you have a black Yakima HoldUp bike rack or the 2-bike add on item # Y02446 you'll need one of the following wheel assemblies to replace an arm. The arms are not sold separately. These will not work on the HoldUp Evos. Replacement Rear Wheel Assembly for Yakima HoldUp Bike Carriers item # 8890281 Replacement Front...
  view full answer...
• Does Yakima Holdup 2 Bike Hitch Add On Fit Older Version of Yakima Holdup
  Yes, I confirmed with Yakima that the expansion kit part # Y02446 does fit your earlier version of the Holdup # 02433.
  view full answer...
• Parts Needed to Use the Yakima HoldUp 2 Bike Rack for 2" Hitches with a 1-1/4" Hitch
  To convert your Yakima HoldUp 2 Bike Rack for 2" Hitches # Y02443 so that it will fit a 1-1/4" hitch receiver you need the Replacement Tongue # 8880581 along with the Hardware Kit # Y90195. Please note that when using this smaller tongue you cannot utilize the 2-Bike Add-On # Y02446. You will only be able to carry 2 bikes with the 1-1/4" tongue.
  view full answer...
• Replacement Mounting Bolt Kit for Yakima HoldUp Plus 2 Bike Carrier Y02446
  Yes, you can use Replacement Mounting Hardware part # Y8880128 to secure your Hold Up Plus 2 extension # Y02446 to your existing HoldUp platform carrier.
  view full answer...
• Comparing the Yakima HoldUp 2 and the Kuat Sherpa 2.0
  Between the Yakima HoldUp 2, part # Y02443 and the Sherpa 2.0, part # SH22G, I personally like both, however, they are built around different bikes and uses. The Yakima HoldUp is a better rack if you have kids bikes, heavier bikes, or could possibly need a 4 bike carrier in the future. The rack is expandable to carry a total of 4 bikes with part # Y02446, or the two out of the base model. The HoldUp is also able to carry bikes with 14 to 29 inch wheels, covering a wide grouping of family...
  view full answer...
• Can the Thule Apex XT Bike Rack Carry a 50 lb E-Bike
  While the Thule Apex XT 5 Bike Rack # TH9026XT does have a weight capacity of 150 lbs, this is for when it is fully loaded to 4 or 5 bikes (30 lbs - 35 lbs per bike). The individual cradles won't be able to handle a 50 lb bike so we'll need to find an alternative to transport your E-Bike. An alternative option from Yakima is the HoldUp 2 Bike Rack # Y02443 which can carry up to 2 bikes weighing 60 lbs each. If you need to carry more bikes the you can then use the Plus 2 2-Bike Add-On #...
  view full answer...
• Will Black Yakima HoldUp Extension Fit Older Gray Yakima HoldUp Bike Rack
  The HoldUp has 3 generations. The first 2 were gray. I checked with Yakima and the extension, # Y02446, for the current generation black HoldUp is retro-compatible with the HoldUp (2009) 8002433 model. This is the version that only fits 2 inch hitches.
  view full answer...
• Comparing the Yakima HoldUp 2 Part # Y02443 with the Kuat Transfer 2
  For your 2017 Lexus NX, the best bike rack for you is going to depend on the type of bikes you have and how often you plan to carry them. Both the Kuat Transfer 2 part # KU74FR and the Yakima HoldUp 2 part # Y02443 are excellent bike racks that will work well for you. However, I recommend the Yakima HoldUp as it has a bit more features that will work with your bikes and vehicle better than the Kuat Transfer will. For starters, the HoldUp can carry bikes weighing up to 60 lbs each whereas...
  view full answer...
• Recommended Add-On Kit For Yakima HoldUp 2 Bike Rack
  In order to add an extension to be able to carry an additional 2 bikes on a Yakima HoldUp bike carrier like part # Y02443, you would need a bit more than just part # Y8890279 and the wheel trays. You would need the upright masts needed to secure the bike frame to the extension, so I recommend part # Y02446 to make sure you have all the components needed to be able to carry 2 more bikes.
  view full answer...
• Maximum Tongue Weight Capacity of 2019 Honda Odyssey With Trailer Hitch for Bike Rack
  The tongue weight capacity - or the most a bike rack and loaded bikes can carry - is going to depend on the specific trailer hitch. For your 2019 Honda Odyssey the best hitch to use for a bike rack is the etrailer.com Trailer Hitch Receiver # E98855 which has a tongue weight capacity of 525 lbs. The etrailer hitch # E98855 is the best option to use a bike rack because it offers the best bumper clearance with a distance of just three inches from the hitch pin hole to the bumper, as you...
  view full answer...
  
• Bike Add On Adapter For Yakima HoldUp 2 Bike Rack To Convert to 4 Bikes
  If you would like to add a 2 bike adapter to the Yakima HoldUp 2 Bike Rack for 2" Hitches - Platform Style - Tilting part # Y02443 you will need the adapter part # Y02446. The Plus 2 adapter converts your 2 bike Yakima HoldUp to a 4-bike carrier.
  view full answer...
• Converting Yakima HoldUp 2 Bike Rack for 1-1/4 Inch Receiver for Use with 2 Inch Receiver
  I have a perfect solution for you. To convert your Yakima HoldUp 2 Bike Rack # Y02445 for use with the 2 inch receiver on your new vehicle, you can simply replace the tongue with the Yakima # 8880580. This is compatible with the 1-1/4 inch models to convert it for use with 2 inch receivers and is completely safe to use. It includes the updated latching spring pin. The Plus 2 2-Bike Add-On # Y02446 that allows the carrier to hold up to 4 bikes is not compatible with the # Y02445 for 1-1/4...
  view full answer...
• Does Saris Freedom Bike Rack Have 2-Bike Add-On Extension?
  The Saris Freedom Bike Rack comes as a 2-Bike rack # SA4412B or a 4-Bike Rack # SA4414B. Saris designed it as one or the other and not as add-on extensions. If you want a 2+2 style bike rack, we do have some other options. The Yakima HoldUp # Y02443 is a similar style bike rack and can be extended to carry 4 bikes with the # Y02446 Add-On. This will allow you to carry bikes weighing up to 60lbs each, but you will be limited to 200lbs overall bike weight. I included videos of the Yakima...
  view full answer...
• Comparing the Yakima HoldUp, Kuat NV 2.0 and Thule T2 Classic Platform-Style Bike Racks
  I've linked you to product demonstration videos of all three bike racks. The best of the three racks will depend on the features you're interested in and which features you find most important. First some similarities. All three racks are capable of folding up against the rear of the vehicle when the bikes are removed, and all three can tilt rearward with the bikes in place, allowing easier access to the rear trunk or liftgate of the vehicle. All three racks include hitch locks of some...
  view full answer...
• Where Does the Black Screw of Part # Y8880153 Install of on the Yakima Plus 2 # Y02446
  The hole that your install the screw into from the Replacement Pull Pin for Yakima HoldUp Plus 2 # Y8880153 is on the front driver side end (side closest to the vehicle) of the Plus 2 # Y02446 part of the HoldUp # Y02443. I confirmed the location with my contact at Yakima. i have also attached a picture that shows the location that I am talking about.
  view full answer...
  
• Will the Yakima Hold Up 2 Bike Add-On Work On Older Gray Model
  Yes, I spoke with Yakima and the Plus 2 2-Bike Add-On for Yakima HoldUp part # Y02446 work on all Yakima HoldUp's even the earlier gray models.
  view full answer...
• Will Swagman XTC4 4-Bike Carrier # S64665 Allow Rear Hatch Access on a 2013 Toyota 4 Runner
  The Swagman XTC4 4-Bike Carrier for 2-inch hitches, part # S64665, does have tilting upright masts to allow hatch access when not loaded with bikes but the main horizontal structure can drop only to a level position (as with bikes loaded and going down the road). It does not tilt down below the level position. With your four bikes loaded you will not be able to open your rear hatch. A better option for rear hatch access is the Yakima HoldUp 2-bike carrier # Y02443 partnered with the matching...
  view full answer...
• Yakima HoldUp Plus Two Extension Part # Y02446
  The Yakima HoldUp Plus 2 is intended to be used with the Yakima HoldUp 2 Bike rack, part # Y02443. It slides into the end of the bike rack, and is held in place by a retaining pin. The wheels of the bike rest in the wheel hoops, and the padded ratcheting hook secures the bike from the top of the wheel. I will provide a link to the instructions for the HoldUp. You can find the links below. I have also linked you to some product demonstration videos you might find helpful.
  view full answer...
• Can I Add Two Additional Bikes To My Yakima Platform Bike Rack
  If you have the Yakima HoldUp Bike Rack part # Y02443 or the Yakima HoldUp EVO Bike Rack part # Y02479 then yes, you can use the 2-Bike Add-On for Yakima HoldUp part # Y02446 or the 2-Bike Add-On for Yakima HoldUp EVO part # Y02482 to carry an additional two bikes assuming you have the capacity on your hitch. These are the only two Yakima bike racks that have this capability.
  view full answer...
• What is the Difference Between the 2 Yakima HoldUp Trailer Hitch Mount Bike Racks
  The Yakima HoldUp comes in 2 versions: one only fits 1-1/4 inch trailer hitch receivers, # Y02445, and the other only fits 2 inch trailer hitch receivers, # Y02443. Also, on the 2 inch version you have the option to add an additional 2-bike extension, # Y02446. You cannot add the extension to the 1-1/4 inch version. Other than that they are exactly the same. I have included video review links for both versions for you. If you do not know the size hitch receiver you have, measure the width...
  view full answer...
• Can Yakima Plus 2 2-Bike Add-On be Used with Replacement Spine to Make a HoldUp Rack
  Since the front/rear trays that come on the Yakima HoldUp 4 Bike Rack # Y02443-2 are the same for both the regular rack and the Plus 2 2-Bike Add-On # Y02446 I see absolutely no reason why you can't simply install the trays onto the Replacement Spine # 8890277 to have a 2nd HoldUp bike rack. Please note that if you want to use these bike racks apart from each other you'll need a second hitch bolt and clip # Y8890200. If you want to upgrade the bike rack to include a lock on the hitch pin...
  view full answer...
• Comparing the Thule T2 and Yakima HoldUp Trailer Hitch Mount Bike Racks for a 2011 Mazda CX-9
  Bike racks are not vehicle specific there are just some that vehicle owners purchase more often for certain vehicles than others. Since you have a 2 inch trailer hitch on your 2011 Mazda CX-9, you can use the Yakima HoldUp, # Y02443. The Thule T2, # TH83GC will also fit. I have linked video reviews of both racks for you. The Holdup has a capacity of 60 pounds per bike and the T2 has a 50 pound per bike capacity. The HoldUp will accept 14 to 29 inch bike wheels. The T2 will accept 20 to...
  view full answer...

Do you have a question about this Accessories and Part?