See what our Experts say about this Trailer Valet Trailer Hitch Ball Mount

• Recommended Hitch and Trailer Wiring for a 2026 Mazda CX-90 Plug-In Hybrid
  It sure does Steve, and congrats on your new SUV. The Curt Hitch item # C74MJ does indeed fit the Plug-In Hybrid model of the 2026 Mazda CX-90. The Curt item # C74MJ is a class III hitch with a 2" receiver that comes with all necessary installation hardware. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. I really like the Curt Hitch item # C74MJ because of how it installs. The entire crosstube is hidden behind your rear bumper leaving only the 2" receiver visible....
  view full answer...
• Recommended Hitch for a 2026 Honda CR-V Trail Sport Hybrid
  It sure does Richard. The Curt Hitch item # C13397 does indeed fit the 2026 Honda CR-V Trail Sport Hybrid. This custom fit class III hitch has a 2" receiver and comes with all the installation hardware you'll need to get it installed. The Curt Hitch item # C13397 has a 3,500 lbs towing capacity and a maximum tongue weight of 525 lbs so it'll work great for towing a small trailer or hauling accessories like a bike rack or cargo carrier. I attached a couple of pictures below, and linked...
  view full answer...
• Recommended Hitch and Wiring Harness for a 2026 Kia Sorento EX Hybrid
  I sure can Jesse. The Curt Hitch item # C37RV and the Curt Wiring Harness item # C34FR73HY are indeed confirmed to fit your 2026 Kia Sorento EX Hybrid. The Curt Hitch item # C37RV is a custom fit class III hitch with a 2" receiver. It comes with all hardware necessary to complete the installation. The Curt Wiring Harness item # C34FR73HY will plug directly into the factory wiring harness behind your Kia's rear tail lights. It will provide you with a 4-way connector capable of operating...
  view full answer...
• Recommended Hitch for a 2025 Subaru Crosstrek Premium
  Welcome back David! The Curt Hitch item # C22MJ is the correct one for your 2025 Subaru Crosstrek Premium. We use different part numbers for inventory purposes. The Curt Hitch item # C54GJ you referenced is designed for the 2025 Crosstrek Wilderness models only. The Curt Hitch item # C22MJ is a custom fit class III hitch with a 2" receiver. It's designed to fit all models of the 2025 Subaru Crosstrek except the Wilderness ones so it will fit perfectly on your Crosstrek Premium. This hitch...
  view full answer...
• Recommended Hitch and Trailer Wiring for a 2026 Mazda CX-90 PHEV
  Hey Angus. The correct hitch for your 2026 Mazda CX-90 PHEV is the Curt item # C74MJ. I checked with Curt and this hitch actually fits all models of the 2026 CX-90 including your PHEV. The Curt item # C74MJ is a class III hitch with a 2" receiver that comes with all hardware necessary for installation. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. The PHEV models have a lower 3,500 lbs and 350 lbs towing and tongue weight capacity so you will be limited to that....
  view full answer...
• Recommended Hitch and Trailer Wiring for a 2026 Mazda CX-70
  Congrats on the new SUV Jacob! The correct hitch and trailer wiring for your new 2026 Mazda CX-70 are the Curt item # C74MJ and item # C34FR32HY. The Curt item # C74MJ is a class III hitch with a 2" receiver that comes with all hardware necessary for installation. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. It fits all models of the 2026 CX-70 including the hybrid and PHEV. The Curt item # C34FR32HY wiring harness will add a 4-way connector to your Mazda that...
  view full answer...
• Recommended 4-Way Trailer Wiring and Hitch for a 2017 Buick Envision
  Hey Bob congrats on your wife getting a new SUV! The Curt T-Connector Vehicle Wiring Harness item # C56364 is the correct one for a 2017 Buick Envision. It will provide you with a 4-way connector capable of operating a trailer or accessories lighting functions. The Curt item # C56364 will plug directly into a factory port behind your driver's side rear tire. It'll be located up near the frame. This kit also comes with two relays that activate the factory port to power the 4-way connector....
  view full answer...
• Recommended 2" Ball Mount to Clear the Spare Tire on a Jeep Wrangler
  Welcome back Phillip, and thanks for the information! I've got two ball mounts that are close to 12" from the hitch pin hole to the center of the hitch ball but I don't have one that is exactly 12". I have listed them below: 13" Long - Curt Class III Drawbar item # C45270 and the Curt item # C54CR 2" hitch ball. 11-3/8" Long - B&W Heavy-Duty Ball Mount item # BWBMHD30013 and the Curt item # A-90 2" hitch ball. Both of these ball mounts fit a 2" hitch receiver and have a 4" drop so...
  view full answer...
• Recommended Hitch for a 2021 Nissan Rogue
  Welcome back Ed. Our etrailer Hitch item # e93ZR weighs 31 lbs. Our etrailer Hitch item # e93ZR is custom fit for the 2021 Nissan Rogue. This is a class III hitch with a 2" receiver that has a 3,500 lbs towing capacity and a maximum tongue weight of 525 lbs. You're really going to like our etrailer Hitch item # e93ZR because of how it looks once installed. The entire crosstube is hidden behind the rear bumper cover leaving only the 2" receiver and safety chain holders visible. This not...
  view full answer...
• Does Trailer Valet Ball Mount Come Assembled
  Hey Pete! The Trailer Valet Ball Mount w/ 2" Ball # TV37ZR does come pre-assembled and ready to go. Some of our pictures are like that to show the the different components but it will arrive pre-torqued so you don't have to worry about hitch ball installation. The same is true for the 4" drop model # TV97ZR. I also recommend adding an anti-rattle to your setup like # e38FV, along with a locking hitch pin # e98882 if you want to keep it secure. What kind of trailer are you towing?
  view full answer...
• Recommended Hitch for a 2025 Mazda CX-50
  Congrats on the new SUV Rene! For your 2025 Mazda CX-50, I recommend our etrailer Hitch item # e55XV. The only differences in the Curt Hitch item # C33MJ and our etrailer item # e55XV are the paint finish and the cost. Both hitches are custom fit for your 2025 Mazda CX-50 and both are made by Curt. I prefer our etrailer item # e55XV hitch because that matte finish offers better scratch protection and it blends in better beneath the trim when installed. The Curt Hitch item # C33MJ has...
  view full answer...
• Does the Trailer Mate Hitch Fit a 2020 Toyota Highlander Hybrid?
  It sure does Kat! The Trailer Mate Hitch item # TMT67FR does indeed fit the 2020 Toyota Highlander Hybrid. The hybrid model comes with a 18" donut for a spare so there's no compatibility issues with this hitch. The Trailer Mate Hitch item # TMT67FR is a custom fit class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a maximum tongue weight of 500 lbs so it'll work great to tow a trailer or haul around accessories like a bike rack or cargo carrier. I really like...
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?