Recommended Hitch and Trailer Wiring for a 2026 Mazda CX-90 PHEV
Updated 10/01/2026 | Published 04/25/2026
Products Featured in This Question
Question:
I have a mazda 2026 cx90-phev. What is the correct trailer hitch for this model? It looks like you dont have one listed unless I the standard cx-90, does the phev require a different hitch
asked by: Angus G
Expert Reply:
Hey Angus. The correct hitch for your 2026 Mazda CX-90 PHEV is the Curt item # C74MJ. I checked with Curt and this hitch actually fits all models of the 2026 CX-90 including your PHEV.
The Curt item # C74MJ is a class III hitch with a 2" receiver that comes with all hardware necessary for installation. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. The PHEV models have a lower 3,500 lbs and 350 lbs towing and tongue weight capacity so you will be limited to that.
If you plan on towing a trailer or adding lights to a bike rack or cargo carrier, here are some other parts I recommend:
4-Way Trailer Wiring - Curt T-Connector Vehicle Wiring Harness item # C34FR32HY
Mounting Brackets - Mounting Bracket for 4-Pole Flat Trailer Connector item # C42CR and item # C83DR
Ball Mount - Trailer Valet Ball Mount w/ 2" Ball item # TV97ZR
Locking Hitch Pin - etrailer Trailer Hitch Receiver Lock for 2" Hitches item # e98880
Anti-Rattle Hitch Collar - etrailer item # e38FV
What do you plan on using your new hitch for?
You can add this information, along with any other questions you have, where it says Add Comment.
(click to enlarge)
Product Page this Question was Asked From
CURT Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 5500 lbs WD GTW
- 2 Inch Hitch
- 550 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Trailer Hitch
- Shop: CURT Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Trailer Wiring
- Q&A: Length of Parking Brake Kit Cable
- Video: Review of CURT Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C34FR32HY
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Search Results: hitch cargo carrier
- Search Results: thule pulse
- Search Results: tekonsha
- Search Results: bearing buddies
- Video: Installing the Curt Trailer Hitch Receiver on a 2025 Mazda CX-70
- Video: Curt Class III Trailer Hitch Complete Installation - 2025 Mazda CX-90
- Search Results: parking brake cable
- Search Results: spindle nut
- Search Results: equalizer
- Shop: Parking Brake Kit for 10", 12", or 13" Drum Brake Kits - 136" Long Cable
- Shop: Replacement Spring for Ram Sleeve Lock Couplers - 7,000 lbs and 12,500 lbs
- Q&A: Trailer Hitch For 2025 Mazda CX-90 PHEV
- Q&A: Recommended Hitch and Trailer Wiring for a 2026 Mazda CX-90 Plug-In Hybrid
- Q&A: Ground Wire Location on Trailer For Pollak 6-Pole Connector
- Shop: D Washer for EZ Lube Spindles
- Shop: Bent Roller Ramp Door Hinge Pin - 10" Long - 3/4" Diameter
- Q&A: Does Installing Hitch and Trailer Wiring on 2024 Mazda CX-90 Require Trip to the Dealer
- Video: Curt Mounting Bracket for 4-Pole Flat Trailer Connector Review
- Shop: Roof Rack
- Shop: Brake Controller
- Q&A: Will The Curt Trailer Hitch C74MJ Affect The Foot Sensor On A 2024 Mazda CX-90?
- Q&A: Recommended Hitch and Wiring Harness for a 2025 Mazda CX-90
- Video: Installing the Curt Trailer Hitch Receiver on a 2024 Ford Bronco
Alex
4/29/2026
Hello, I recently purchased the trailer hitch for my 2025 Mazda cx70 premium S. Install was very straight forward. I found the video and instructions very informative and easy to follow. Hitch fits perfectly, took me about two hours total, not including the wiring harness. Take your time, go step by step, and make sure to properly torque the bolts. Top notch hitch, two thumbs up ????