Curt Multi-Ball Mount for 2" Hitches - Solid, Black Powder Coated Shank - Black Balls

See what our Experts say about this CURT Trailer Hitch Ball Mount

• Is Shank On Curt C45650 Multi-Ball Ball Mount Solid or Hollow
  The shank used on the Curt # C45650 mult-ball ball mount is a solid piece of bar stock, not a hollow tube. If you look at the hitch pin hole in the photo I've provided, you can see that the bar is solid.
  view full answer...
  
• Best Multi-Ball Ball Mount for a 2 Inch Reese Trailer Hitch on a 2013 Chevy Silverado
  If your 2013 Chevy Silverado does in fact have a 2 inch wide hitch opening then the Curt multi-ball mount # C45650 will fit. I have included a link to a video review of this ball mount for you. You also will want to consider the rise or drop needed to tow your trailer(s) level. I have included a link to an FAQ article that explains how to measure for rise and drop. I have also included a link to the right with all of the multi-ball ball mounts we carry.
  view full answer...
• Recommended Trailer Hitch Receiver For 2017 Chevrolet Express Van
  The Draw-Tite Trailer Hitch Receiver # DT45507 is basically the top of the line receiver for your 2017 Chevrolet Express Van. It is class 5 with a max towing capacity of 12,000lbs and 14,000lbs with weight distribution hitch. This also has a 2-1/2" receiver opening. If you are not going to be towing close to the weight rating of the Draw-Tite receiver then you could go with a class 4. For a class 4 receiver I recommend the Etrailer Trailer Hitch Receiver # e98861. This receiver has a max...
  view full answer...
• Ball Mount With No Rise or Drop for 2019 Toyota Tacoma With 2 Inch Hitch
  Since the Brophy Ball Mount # EA40 with a 3" rise is too much it sounds like you need a ball mount with no rise or drop. For that the best option is a fixed ball mount with the hitch balls attached, the Curt Multi-Ball Mount for 2" Hitches # C45650. This ball mount will have no drop or rise and give you a 1-7/8", 2" or 2-5/16" hitch ball. I have added a link to a video review for you to check out as well.
  view full answer...
• Compatibility of Curt Multi-Ball Mount # 45650 for Trailer with 2 Inch Coupler
  The Curt Multi-Ball Mount for 2" Hitches - Solid, Black Powder Coated Shank # C45650 has all three standard size hitch balls (including the 2 inch ball you need) welded to the shank. There is not a shank on the hitch ball on this ball mount, but that 2 inch ball is rated for 7,500 lbs towing and 750 lbs tongue weight. Your new Forest River No Boundaries trailer (NoBo) will not have any issues towing with that ball mount behind your 2013 Toyota Highlander with tow package. I can only...
  view full answer...
• Easy to Install Trailer Hitch for 2020 Chevy Express Cargo Van
  The etrailer Trailer Hitch Receiver # e98861 is the one I recommend for your 2020 Chevy Express cargo van. When it comes to installing this hitch, it really doesn't get much easier than this. All you'd need to do is raise it and line it up with the existing holes in the van's frame. From there, just install the hardware and torque to specs. As mentioned, this hitch utilizes the vehicle's factory frame holes so there is zero drilling required. I've attached an installation video for you...
  view full answer...
  
• Picking Out a Ball Mount for 2019 Silverado 1500 based On Hitch and Coupler Heights
  Since the coupler height picture you sent in isn't with the trailer level it's hard to say what rise or drop you'd need. Typically you take the distance from bottom of coupler lip to ground compared to distance from top of hitch opening down to ground. Using your two figures of 20 inch on the hitch and 23 on the coupler you'd need a rise of 3 inches. But without the trailer being level I can't really recommend that. Could you level the trailer and get me what the coupler distance is again?...
  view full answer...
  
• Multi-Ball Mount Recommendation for a 2007 Chrysler Town and Country
  As long as you have a 2 inch hitch installed on your 2007 Chrysler Town and Country like the Draw Tite 75305 then yes, the Multi-Ball Mount part # C45650 would fit and work well for you.
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?