etrailer Trailer Hitch Pin and Clip for 2" and 2-1/2" Hitches - 3-1/2" Span
(176 reviews)
Price: $11.92
etrailer Trailer Hitch Pin and Clip for 2" and 2-1/2" Hitches - 3-1/2" Span
Retail:$13.52
Our Price: $11.92
You Save: 12%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (176)
- Q & A (0)
- Videos (2)
- Photos
etrailer Hitch Pins and Clips
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- Standard Hitch Pin
- 5/8 Inch Diameter
- 3-1/2 Inch Long
- 3-1/2 Inch Span
- Bent Pin
- etrailer
Use this durable hitch pin to secure your ball mount or hitch-mounted accessory to your 2" or 2-1/2" hitch receiver. Includes retaining clip. Usable length is 3-1/2". Black e-coat resists corrosion.
Features:
- Hitch pin secures ball mount or other hitch-mounted accessory in your trailer hitch receiver
- Inlcuded clip inserts into end of pin to hold pin in place
- Carbon steel construction with black e-coat is durable and corrosion resistant
Specs:
- Application: 2" x 2" and 2-1/2" x 2-1/2" trailer hitch receivers
- Pin diameter: 5/8"
- Usable length (span): 3-1/2"
- Lifetime limited warranty
e45TR etrailer Trailer Hitch Pin and Clip for 2" and 2-1/2" Hitches - 3-1/2" Span
Replaces MaxxTow MT58FR (50191)
Item # e45TR
Video of etrailer Trailer Hitch Pin and Clip for 2" and 2-1/2" Hitches - 3-1/2" Span
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of etrailer Hitch Pins and Clips - for 2 Inch and 2.5 Inch Hitches - e45TR
Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at our trailer hitch receiver pin and clip. This is a durable 5/8 inch diameter carbon steel hitch pin that will secure your ball mount or hitch mounted accessory to your two inch or 2 1/2 inch hitch receiver. This does include the retaining clip here, so we can slide that in place to make sure that the pin is going to stay where we want it to be and it's not gonna wiggle its way out. Our usable length from where that clip is going to install to about where it's going to start bending up here is going to be 3 1/2 inches, which should accommodate all the two and 2 1/2 inch hitch receivers out there, but you do wanna make sure that your outer diameter of your hitch is going to allow for that clip to be put through there.
This does have a nice, black e-coat finish to it, both the pin and the clip. So, that's gonna help resist corrosion, help it to last a nice, long time. And it does have that durable carbon steel as I mentioned before, so it is going to be very sturdy for you. Comes with a lifetime limited warranty, so if you we're to have any problems, you're more than welcome to reach out to us here at etrailer.com. We're always happy to work with our customers, make sure you're getting a product that you're satisfied with and works well for you.
So, if you are wanting to have a hitch pin for your two inch or 2 1/2 inch hitch receiver, this is gonna be exactly what you need. That completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
etrailer Trailer Hitch Pin and Clip for 2" and 2-1/2" Hitches - 3-1/2" Span - e45TR
Average Customer Rating: 4.8 out of 5 stars (176 Customer Reviews)
Use this durable hitch pin to secure your ball mount or hitch-mounted accessory to your 2" or 2-1/2" hitch receiver. Includes retaining clip. Usable length is 3-1/2". Black e-coat resists corrosion.by: BillyMc05/27/2023
Seems to be well made. Like the plating or coating.
by: Boyd06/01/2021
I had a back ordered item that eventually came along with some other items I ordered at the same time. I’m not good about waiting but the wait was worth it as the entire order came a couple days ago and I immediately started using the items. Thanks for getting it right.
by: Julie 04/23/2023
Perfect for what is needed. Great customer service!
by: Michael 05/19/2023
Works great.
by: Brent 05/07/2023
Works good
by: Paul 12/09/2021
Good products
Paul
12/9/2022
Excellent product. Heavy duty and the adjustable holes work with all kinds of trailer set-ups.
by: Thomas 03/06/2023
Very prompt service and communication! Keep it up!
by: James S10/01/2020
Appears to be of high quality. I love how thick thw cotter pin is and how strong the product is. It appears both pieces will hold up well over time. lt is much better quality and much better built than even the one that came with my trailer hitch. I am very happy I decided to purchase this.
by: Dave06/17/2020
These hitch pins, like everything else I've bought at etrailer, is well made and sturdy. But what I believe is most commendable about the company is their superb customer service. You can get good products and fair prices from online retailers, but it is their attention to the customer's needs that sets them apart.
by: Richard 06/02/2021
Nice accessory to go with the new hitch I purchased from etrailer. The black Ecoating is awesome, not found on other similar pins.
by: Atanas09/20/2022
Easy to install!
by: Butch10/30/2020
Round black pin and keeper. Fits into the ball mount and came in the nice brown box that ball mount came in. Thanks etrailer
by: Tim 09/24/2021
Good hitch pin/clip. Does what it is supposed to do.
by: Dale 08/12/2021
Hitch Pin, not much more. Hoping the black finish will look nice after use.
by: James06/01/2022
Excellent quality and excellent customer service!
by: J-Unit07/11/2021
Piece of junk, black paint scrapes off immediately, cheap look and feel
by: David04/15/2020
etrailer never disappoints. They always have what I need in stock and ships quickly.
by: David05/04/2022
Product fine.. slow shipping
by: Lew04/01/2022
Follow directions. It is an easy install. Just takes time.
by: Susan 01/27/2022
I called in to make sure that I got correct every thing that I needed. Rodney was great and package arrive within 3 days
by: Tracie07/26/2021
Easy website to maneuver, prompted shipment, and excellent product! Thanks!
by: Eugene 05/20/2021
The pins are great.
by: Gary 09/02/2021
OK, not the one I looked at
by: Tom 07/02/2020
Exactly as described
25
173
Show More Reviews
See what our Experts say about this etrailer Hitch Pins and Clips
- Hitch Pin For 2 Inch Trailer Hitch on BMW X3The Curt Trailer Hitch Receiver # 13573 does not come with the hitch pin, that is sold separately. This is a 2 inch hitch, so all you need is the following: - Trailer Hitch Pin and Clip # e45TR
view full answer... - Does Erickson Big Bed Junior Hitch Mounted Load Extender # EM07605 Come with Needed Hitch PinsYes, the Erickson Big Bed Junior Hitch Mounted Load Extender # EM07605 comes with the hitch pins needed for adjusting the height of the horizontal bar, but not for securing it to the hitch. You would need a hitch pin and clip like part # e45TR.
view full answer... - University of Tennessee Hitch Cover For 2 Inch Trailer HitchYes, there is a University of Tennessee hitch cover that fits your 2 inch trailer hitch, and will accommodate the hitch pin hole that is 1-1/2 inches from the hitch opening. What you are looking for is the following: - Tennessee Chrome Logo Emblem 2" Hitch Cover # AMG100543 The hitch pin hole is 2 inches from the very back of the cover to the center of the hitch pin hole so the back won't be completely flush against the face of your hitch. To secure it to your hitch you will need Pin...
view full answer... - Replacement Hitch Pin And Clip For A 2"x2" Trailer Hitch On A 2022 Hyundai PalisadeFor your 2021 Subaru Ascent, with the etrailer Trailer Hitch Receiver # e35ZR, I recommend using the Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo Carriers # e99047. This is a locking hitch pin that can be keyed alike to match other etrailer branded locks, so you don't have to carry around a bunch of keys. A locking hitch pin is a much better option than a traditional pin and clip that increases security and theft prevention, however if you still wanted a traditional pin and...
view full answer... - Does Curt Winch Mount Plate Fit Curt Front Hitch For 2014 Honda RidgelineYes, the Curt winch mount plate does fit the Curt front mounted hitch for your 2014 Honda Ridgeline so you can use the two parts together, which are the following: - Curt Front Mount Trailer Hitch Receiver # 33328 - Curt Trailer Hitch Electric Winch Mount Plate # C31010 As for the plastic on your Ridgeline it does need to be temporarily removed, yes. The only other thing I wanted to add is that in order to mount the winch plate in the hitch you'll just need the Hitch Pin and Clip # e45TR.
view full answer... - Lift Height of Viking Solutions Rack Jack IIThe lift height is the entire 8 foot 7 inch height of the hitch mounted Viking Solutions Rack Jack II Hoist w/ Winch # 310-VRJ001. The only other thing you will need with this is a pin and clip to secure it to your hitch, the Hitch Pin and Clip # e45TR.
view full answer... - How To Adapt a Schwinn Bike Rack with a 1-1/4" Shank to a 2" Hitch ReceiverIt sounds like you have a 2" hitch and your Schwinn bike rack has a 1-1/4" shank. While the Replacement Aluminum Hitch Adapter Sleeve # SA3032 may work, it was designed for Saris bike racks that use a 1-1/4" to 2" adapter sleeve and would not have been tested with a Schwinn bike rack. I recommend that you use the Trailer Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver # e63YR which will reduce your hitch to 1-1/4" instead of adapting the shank on your Schwinn bike rack to the hitch....
view full answer... - What Size Hitch Pin Is Used To Secure Curt Euro Style Ball Mount? The Curt Class II Euro Style Drawbar # C45562 requires a 1/2" hitch pin like the one included with the Reducer # HT02. You will need a 5/8" Pin # e45TR to secure the reducer in your 2" receiver.
view full answer... - What Parts are Included with Erickson Hitch Mounted Load ExtenderThere are two main pieces, the L shaped piece and the T shaped piece. Both ends of the L fit into the T so that the cross bar can be positioned behind the truck or up higher level with the cab. The pins that hold the extender together are included, but you will need a hitch pin and clip like part # e45TR.
view full answer... - Hitch Adapter With Rise for Kuat PivotIf you're having clearance issues with the Kuat Pivot PV20B your best bet is to use the Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers # D210. This will give you about 4 extra inches of height from your current receiver and the receiver has a 350 lb tongue weight whereas most adapters will reduce the tongue weight of your hitch by 50 percent. You will need pin and clip # PC3 to keep the mount in your receiver.
view full answer... - Sway Control For Hitch Not Rated For Use With Weight DistributionGood question, and the hitch on your Audi is not rated for use with weight distribution, so what I recommend instead is a friction sway control set up. This will provide you with better control over your trailer to give you a much more controlled, steady, and comfortable towing experience. The way it works is the ball plate from the kit attaches to your trailer frame, and the other end attaches to a tab on a ball mount, like in the accompanying photo. Just keep in mind this will only...
view full answer...
- Pintle Hook For Towing Trailer With Lunette RingThere is not an adapter so you'll just need a pintle hook for your hitch to attach to your trailer's lunette ring. Depending on what size hitch you have there are a pair of options: - 2" Hitch: Curt Pintle Hook # C48004 - 2-1/2" Hitch: Curt Pintle Hook # C48010 Both of these will need to be secured to your hitch with either Pin and Clip # e45TR or Hitch Lock # e98881.
view full answer... - How To Carry 2 Kayaks on a Chevy ColoradoSure - we have just want you want haul two kayaks on a Chevrolet Colorado using a "T" bar in the rear receiver! Check out the Darby # DTA944-968-924 Extend-A-Truck kayak carrier. I have included a link below and a video. This would be great for kayaks, or to move a long extension ladder. It is also versatile to create a bed extension as well. I have included a video review link below. You need a standard hitch pin and clip like the etrailer # e45TR or a locking pin like the etrailer...
view full answer... - Trailer Hitch Receiver For 2020 Chevy Bolt EV For 125 lbs of AccessoriesYes, there is a single trailer hitch receiver that fits your 2020 Chevy Bolt EV that has the necessary tongue weight capacity to carry 125 lbs of accessories. The hitch is from EcoHitch, and is the following part number: - EcoHitch Hidden Trailer Hitch Receiver # 306-X7359 The EcoHitch # 306-X7359 has a 300 lb tongue weight capacity, and is the only hitch that fits your Bolt which has a capacity of over 100 lbs, which is why it's the only option for the amount of weight you are looking...
view full answer... - Truck Bed Extender With at Least 63 Inches of HeightThere is one option for a truck bed extender that meets your 63 inch height requirement, from Erickson: - Erickson Big Bed Load Extender # EM07600-07601 The # EM07600-07601 reaches a maximum of 64 inches in height, so you'll be level and can haul your canoe. The only thing you'll need is a pin and clip or lock to secure the extender to your hitch, either Pin & Clip # e45TR or Anti-Rattle Trailer Hitch Receiver Lock # 63232.
view full answer... - Ball Mount For Curt Hitch C13264 on Toyota TacomaThere isn't a specific ball mount required for the Curt Trailer Hitch # C13264 on your Toyota Tacoma. The correct one will depend on the rise or drop you need: - 1" Rise, 2" Drop: Draw-Tite Ball Mount for 2" Hitches # 4284 - 3" Rise, 4" Drop: Draw-Tite Ball Mount for 2" Hitches # 4285 Along with the ball mount you will also need a hitch lock or pin and clip to secure it to your hitch, and a hitch ball with the correct diameter shank. For that you can use the following: - Pin and Clip...
view full answer... - Extended Ball Mount Options For 2 Inch Hitch For ClearanceThere are a couple options for extended ball mounts that fit 2 inch hitches and have extra length for clearance. You didn't mention the rise or drop you need so I'll give you a couple choices so you can find the right one: - 1" Rise, 2" Drop - 14" Long: Brophy Ball Mount # EA20 - 3" Rise, 4" Drop - 14-5/8" Long: Brophy Ball Mount # EA40 Apart from being extra long, both ball mounts are aluminum so they won't corrode, and have an 8,000 lb towing/800 lb tongue weight rating. For a hitch...
view full answer... - Ball Mount For Curt Hitch on 2019 Honda Odyssey For 4x8 U-Haul TrailerWe can definitely help you get exactly what you need to tow a 4 x 8 U-Haul trailer with your 2019 Honda Odyssey and the Curt Hitch # C64NR. According to U-Haul, their coupler height is 18 inches, and when we installed this Curt hitch on a 2019 Odyssey we found that the distance from the ground to the top of the receiver was 14-1/2 inches. So you'll need a ball mount with approximately 3-1/2 inches of rise, though you can go within an inch or so either way without any issue. There is an...
view full answer...
Do you have a question about this Hitch Pins and Clip?
Info for this part was:
Edited by:
Lindsey S
Video Edited:
Jacob T
Video by:
Dustin K
Written by:
Mike S
Installed by:
Michael B
Installed by:
Bradley B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Boyd
6/2/2022
Much easier to use than the standard ones. No more knuckle bruises.