See what our Experts say about this Draw-Tite Trailer Hitch Ball Mount

• Trailer Hitch, Wiring Harness and Ball Mount Recommendation for 2019 Toyota Prius
  The trailer hitch I highly recommend for your 2019 Toyota Prius is the Draw-Tite # 24966 because it has a concealed crosstube and is a bolt-on installation that will not require drilling into your vehicle's frame to install. This Class I, 1-1/4 inch trailer hitch is almost entirely hidden behind your bumper, as you can see by the accompanying photo, allowing your Prius to maintain a clean look. The hitch, which comes with a lifetime warranty, has a black powder coat finish to protect it...
  view full answer...
  
• Replacement Hardware for Draw-Tite Trailer Hitch Receiver to Move From 2016 to 2017 Ford Fusion
  To order the exact original hardware that was included with the Draw-Tite # 24897 use part # RHK. Choose "Draw-Tite" from the drop down and then enter the part number into the box. All of our prices are on the product pages and I've also linked an install video for you on a 2016 Fusion.
  view full answer...
• Hitch Recommendation for 2003 Honda Accord EX 4-Door Sedan for Use with Out-Sider ASL-250 Lift
  All of the hitch receivers offered for your 2003 Honda Accord are the 1-1/4-inch size and rated as Class I hitches. Class I hitches are considered suitable for light-duty use, such as with 2-bike racks, small cargo baskets and for light towing applications. The 142-lb Out-Sider ASL-250 Platform Lift is intended for use with 2-inch Class II or Class III receivers and so is not compatible with the 1-1/4-inch Class I hitches available for your Accord. You cannot use a hitch adapter in your...
  view full answer...
• Trailer Hitch and Wiring Recommendation for 2019 Infiniti Q50 Sport
  Hey Alexis, we have the Draw Tite hitch part # 24931 which is a fit for your 2019 Infiniti Q50 Redsport and would work great. Then for trailer wiring you'd want the Curt # C56248. For a ball mount you would want the part # 3592 and then for a hitch ball part # 19256 and you'd be set.
  view full answer...
• 1-1/4 Inch EcoHitch InvisiHitch for 2015 Subaru Impreza
  We do indeed offer the EcoHitch X7212, which we offer as part # EH22RR which is compatible with the 5 door wagon Impreza models with a single exhaust and the knockout panel on the rear bumper face. If you'll be using the hitch for light duty towing, you'll also need a trailer wiring harness like # 118573, a ball mount like # 3592 and # 19256 for a 1-7/8 or # 19258 for a 2 inch trailer ball.
  view full answer...
• 2018 Prius Prime Trailer Hitch Recommendation
  For your 2018 Toyota Prius Prime we have the Draw Tite hitch part # 24966 as a confirmed fit. The hitch by itself has a capacity of 2,000 lbs trailer weight. You'd need to check the owners manual of your vehicle and be sure to stay under the capacity listed there for towing too. For trailer wiring you'd then want the part # C56371 which is a confirmed fit. I attached an install video for this for you to check out as well. For a ball mount then you'd need the part # 3592 and hitch ball...
  view full answer...
  
• What is a Drawbar and Why Would I Need One?
  The hitch drawbar or ball mount is the part that slides into the hitch receiver that has the trailer ball bolted to it. You'll need the ball mount if you plan on towing, but if you're only using the hitch as a mount for a hitch mounted accessory like a bike rack or cargo carrier, you won't need it. If you need a ball mount that's compatible with the Curt Class I hitch, part # C11256, I'd recommend # 3592. For 1-7/8 inch trailer ball, use # 19260 or # 63845 for a 2 inch ball. For a trailer...
  view full answer...
• Trailer Hitch Installation Instructions for a 2002 Saturn SL Sedan
  I have included a link to the instructions for trailer hitch # C11181 for you to view. On a 2002 Saturn SL sedan there are 7 steps which you will see in the instructions, and I have listed here: 1a.) If vehicle is equipped with tie-down brackets and/or existing weldnuts, remove the brackets from inboard side of the frame rail by removing three M12 bolts, each side. Return tie-down brackets and bolts to vehicle owner for reinstallation if hitch is removed. 1b.) If vehicle is not equipped...
  view full answer...
• Recommended Towing Package for a 2007 Honda Accord
  For your 2007 Honda Accord, I recommend taking a look at the Draw-Tite Sportframe Trailer Hitch Receiver part # 24787. This hitch has a Class I rating with a 1-1/4" receiver tube opening. The maximum gross trailer weight (GTW) and tongue weight (TW) this hitch can handle is 2,000 lbs and 200 lbs respectively. This is the only trailer hitch receiver that we have confirmed to fit your vehicle that does not require drilling for installation and is completely bolt-on. I have also attached an...
  view full answer...
• 2007 Honda Accord V6 Sedan Towing Capacity and Hitch Recommendation
  To answer the most basic part of this question first, you are correct that only Class I hitches with 1-1/4" receivers are available for your 2007 Honda Accord, but if your weight estimates are correct, they will be sufficient to handle this job. I did some research and according to the owner's manual of the 2007 Honda Accord, it has a 1000-lbs towing capacity; it also looks like your Yamaha YZF R1 has a wet weight of around 450-lbs. As long as your total weight of trailer and bike stay...
  view full answer...
  
• Recommendation For Trailer Hitch For 2002 Honda Accord 2-Door Coupe
  Yes, I have a hitch for you! I recommend the Curt Trailer Hitch Receiver, Item # C11290, that is a confirmed fit for your 2002 Honda Accord Coupe. It is a Class I, 1-1/4 Inch light duty hitch that lets you tow a trailer, carry a bike rack, or carry a cargo carrier. It has a maximum capacity of 2,000-lbs and a maximum tongue weight of 200-lbs. It bolts on and is very durable. This hitch is a confirmed fit but keep in mind that your Honda has a maximum towing capacity of 1,000-lbs so...
  view full answer...
• Why Does The Ball Mount Not Slide All The Way In My Draw-Tite Class I 1-1/4 Inch Hitch # 24787
  The Draw-Tite Class I 1-1/4 Inch Hitch, part # 24787, is a Class I hitch. All of the hitches available for your 2007 Honda Accord are Class I hitches. The Class I hitch has a 2,000 lbs. towing capacity and a 200 lbs. tongue weight capacity. Sounds like the ball mount you are using is a Class II ball mount. The Class II ball mount is rated for 3,500 lbs. towing capacity and 350 lbs. tongue weight. It is designed to NOT fit a Class I hitch to keep somebody from overloading the Class I hitch....
  view full answer...
• Can 2018 Honda Accord Tow Small Motorcycle Trailer
  We do have hitches that fit your 2018 Honda Accord Sport so with one installed like the Draw Tite part # 24972 you could tow a small trailer like you mentioned. You'd also need trailer wiring like the # C56402 and a ball mount # 3592.
  view full answer...
• Class II Ball Mounts and Bike Racks Will Not Fit a Class I Trailer Hitch on a Mazda 5
  The trailer hitch you have, # 24874, is a Class I trailer hitch. The accessories you are trying to use must be Class II accessories and will not fit. That tab inside the shank is a safety stop. It is there to prevent you from overloading the Class I hitch which could damage it or the vehicle. We started pointing this out on all of the Class I trailer hitch product pages, see picture, after numerous comments from customers having the same problem. The correct ball mount for this hitch and...
  view full answer...
  
• Trailer Hitch Receiver and Wiring Harness For a 2019 Infiniti Q50 Red Sport
  According to Draw-Tite their Sportframe Trailer Hitch Receiver # 24931 fits all models including the Red Sport trim on your 2019 Infiniti Q50. Draw-Tite recommends using the Ball Mount # 3592 with a 1-7/8" # 19257 or 2" # C40018 hitch ball. You will be able to hold the ball mount using a Pin and Clip # F-4 or you can secure it with the trailer using the Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set # 3794DAT. The Curt T-Connector Vehicle Wiring Harness # C56248 will provide...
  view full answer...
• Recommended Trailer Hitch for 2013 Dodge Dart Rallye
  From my research I found that the towing capacity for your 2013 Dodge Dart Rallye has a maximum towing capacity of 1,000 lbs. This would be the weight of any trailer you attach added to the weight of the cargo on the trailer. The hitch I recommend is the Curt Trailer hitch, part # C11281. This is a Class l hitch and has a 1-1/4 inch receiver opening. The ball mount I recommend is the Draw-Tite Ball Mount, part # 3592. This fits 1-1/4 inch receivers and uses hitch balls with a 3/4...
  view full answer...
• Can a 2015 Nissan Versa Carry a Wheelchair and Lift on a Trailer Hitch
  You can use a cargo carrier in a hitch on your 2015 Nissan Versa. However, all of the trailer hitches for the vehicle, such as # C11256, are Class I hitches which have a low tongue weight capacity (200 pounds) and not very many options for carriers. Wheelchair lifts are often heavy and add to that the weight of the wheelchair itself and it can easily exceed the tongue weight capacity of the hitch if you can find one that is compatible with a Class I hitch. It is possible though to use...
  view full answer...
• Can a 2014 Hyundai Accent Tow a Trailer?
  The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24884 is a fit for your 2014 Hyundai Accent. You are correct that cars aren't really designed for heavy hauling, so you do need to stay within the capacities of your owner's manual and the products themselves. The 3 bolts you referenced are grade 5 and will secure the hitch at the rated capacities without issue. This hitch is rated for 200 lbs tongue weight and up to 2,000 lbs towing but the manufacturer...
  view full answer...
  
• What is Towing Capacity of 2000 Ford Mustang V6
  I looked up the towing capacity of your 2000 Ford Mustang V6 and it appears to have a 1,000 lb towing capacity. So the Curt Trailer Hitch # C11041 could work but you'd need to get your 1,100 lb trailer setup lower by at least 100 lbs to be safe. For easy to install trailer wiring you'd just need the part # C55326, for a ball mount # 3592, and for hitch balls you'd want # 19258 for a 2 inch ball or part # 19256 for a 1-7/8 inch ball.
  view full answer...
• Why do Some Ball Mounts Have a Drop and Rise and Others Only have a Rise
  Some ball mounts, generally Class I and Class II ball mounts, are designed by the manufacturer for use in the rise position only. These ball mount designs are intended for use with vehicles that require a rise only and would be too low to the ground to ever need a lower ball mount. Ball mounts listed with a rise only should not be used in the lowered position because the manufacturer has not tested them for use in that position. Some Class I and Class II ball mounts, like item # 3592,...
  view full answer...
• Can a 2009 Lincoln MKZ Pull a Pop-Up Camper
  In order to tow a trailer with a 2009 Lincoln MKZ you'll need a trailer hitch, trailer wiring harness, and ball mount/hitch ball. I will attach a list below with each of these options. In regards to capacity and compatibility, you'll have to refer to your copy of the owner's manual for this which should be located in the glove box. We cannot recommend deviating from the manufactures instructions. Curt Trailer Hitch Receiver part # C11329 Hopkins Plug-In Simple Vehicle Wiring Harness with...
  view full answer...
• Ball Mount Recommendation for Use with Curt Hitch on 2003 Chevy Malibu
  With Class II hitches, Curt recommends part # 24656 for your 2003 Chevy Malibu you have to go with the ball mount that the manufacturer recommends otherwise the warranty of the hitch is voided. The Class II hitches aren't rated for very much weight so when you go with a different drop or length the leverage put on the hitch is different and the manufacturers are very cautious. For this hitch the recommended ball mount is the part # 3592 which then for a hitch ball you'd want the # 19258...
  view full answer...
• Can a 2006 Ford Mustang GT Tow a Small Trailer and MX Bike with Curt Hitch C11312
  The Curt hitch # C11312 is a fit for a 2006 Mustang if it is a V6 model. If you have a V6, it is possible as long as the total weight and tongue weight of the loaded trailer you plan on towing is less than the weight capacities for the Curt hitch part # C11312 and the towing capacities listed in the owner's manual for your 2006 Ford Mustang GT you would be fine. The weight capacities for the hitch you have installed on your vehicle is 2,000 lbs total trailer weight and 200 lbs tongue...
  view full answer...
• How to Transport Dirt Bike With 2012 Mazda 5
  The only way for you to carry a dirt bike with your 2012 Mazda 5 is with a small trailer. The reason for that is the only hitch available for this vehicle is a Class 1 hitch, and these have 1-1/4 inch receivers and there are no dirt bike or motorcycle carriers that are compatible with that size hitch or have the weight capacity you need. If you do decide to do this you will need a hitch, wiring and ball mount, and the correct parts for your 2012 Mazda 5 are the following: - Draw-Tite...
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?