Trailer Hitch Ball Mount - One Ball

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

...Hey JC, thanks for reaching out! The B&W Tow & Stow 2-Ball Mount # BWTS20066BMP is definitely compatible with the MultiPro tailgate on your 2024 GMC Sierra 2500, but the only one available to fit...

Hello Paul, thanks for reaching out. The inside dimension of the Curt Heavy-Duty Dual Ball Attachment for Weight Distribution Shanks #C29NR is 2". It will work with any standard weight distribution shank. I edited a picture to illustrate.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Hey JD, The Weigh Safe Hitch w/ Built-In Scale for 2.5" Hitch #WS88RR uses hitch pic lock #WS54CR, which has a shear strength capacity of 45,000lbs according to Weigh Safe.

The Curt Rebellion XD part #C57UR measures 10 inches from the bottom of the shank that inserts into the hitch opening to the bottom of the ball mount. So you would lose 10 inches of ground clearance measured from bottom of your hitch.

...holding it to the shank but the balls are permanently mounted. The 2" ball has a 10,000 lbs weight capacity and the 2-5/16" ball a 14,000 lbs one. I have linked a review video below that will give you...

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

...How does the etrailer Adjustable 2-Ball Mount # e66PR compare to the BandW Tow and Stow 2-Ball Mount # BW29FR or BulletProof Hitches 2-Ball Mount # MD206? I need one for my Jeep gladiator...

Hey Bill! The Trimax Universal Anti-Rattle Clamp #TMX66SR will fit your receiver. It actually sits on the top of the shank of whatever you put in and then the lip pulls up on the bottom of the receiver tube. See the attached photo. That design…

Hey Carl! How much does the Weigh Safe weigh? With all of the parts put together the #WS88RR weighs 35-1/2 lbs. If you need anything else don't hesitate to reach out in the comments below.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

...Hey JC, thanks for reaching out! The B&W Tow & Stow 2-Ball Mount # BWTS20066BMP is definitely compatible with the MultiPro tailgate on your 2024 GMC Sierra 2500, but the only one available to fit...

Hello Paul, thanks for reaching out. The inside dimension of the Curt Heavy-Duty Dual Ball Attachment for Weight Distribution Shanks #C29NR is 2". It will work with any standard weight distribution shank. I edited a picture to illustrate.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Hey JD, The Weigh Safe Hitch w/ Built-In Scale for 2.5" Hitch #WS88RR uses hitch pic lock #WS54CR, which has a shear strength capacity of 45,000lbs according to Weigh Safe.

The Curt Rebellion XD part #C57UR measures 10 inches from the bottom of the shank that inserts into the hitch opening to the bottom of the ball mount. So you would lose 10 inches of ground clearance measured from bottom of your hitch.

...holding it to the shank but the balls are permanently mounted. The 2" ball has a 10,000 lbs weight capacity and the 2-5/16" ball a 14,000 lbs one. I have linked a review video below that will give you...

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

...How does the etrailer Adjustable 2-Ball Mount # e66PR compare to the BandW Tow and Stow 2-Ball Mount # BW29FR or BulletProof Hitches 2-Ball Mount # MD206? I need one for my Jeep gladiator...

Hey Bill! The Trimax Universal Anti-Rattle Clamp #TMX66SR will fit your receiver. It actually sits on the top of the shank of whatever you put in and then the lip pulls up on the bottom of the receiver tube. See the attached photo. That design…

Hey Carl! How much does the Weigh Safe weigh? With all of the parts put together the #WS88RR weighs 35-1/2 lbs. If you need anything else don't hesitate to reach out in the comments below.