Recommended Round Trailer Marker Lights to Fit in 2-3/4 Mounting Hole
Updated 10/19/2020 | Published 10/16/2020
Products Featured in This Question
Question:
I have a 2011 PJ Dumper trailer with 2.5in grommet mounted round marker lights, they need to be replaced. The openings in the steel on the trailer are 2.75in, all the 2.5in lights I find are for 3in openings. What do I do? Does someone make the 2.75in style?
asked by: Bradley J
Expert Reply:
The # MC56RB you were looking at is designed to fit in a 2-3/4" diameter hole and will have mounting holes 2-11/16" apart, so these will work for your 2011 PJ Dumper trailer. If you also need new pigtails for the wiring, you can use the # A86PB or the # A46PB (right angle pigtail).
I've linked some review videos of these parts for you to have a look at.
Product Page this Question was Asked From
Trailer Clearance or Side Marker Light - Submersible - Round - Red Lens - Black Flange
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Round
- Recessed Mount
- Submersible Lights
- Incandescent Light
- 2-1/2 Inch Diameter
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Is there a Replacement for Dexter Nev-R-Lube Hub 008-386-80
- Article: Trailer Wiring Diagrams
- Q&A: Red and Amber 2-1/2 Inch Round LED Trailer Lights with Grommet and Plug
- Q&A: Availability of Wall Sconce to Replace E110265
- Q&A: Should LED Trailer Lights be Mixed with Incandescent Trailer Lights
- Q&A: Replacement Rooftop AC Unit For A Dometic Duo-Therm 630035.331
- Q&A: Replacement Propane Gas Detector for an Atwood 31013 Propane Detector
- Q&A: Replacing 6-Way on Trailer With 7-Way Connector