Recessed Clearance Lights and Wiring For a Dump Trunk Bump Bed

Updated 05/16/2022 | Published 05/15/2022

Products Featured in This Question

Optronics LED Clearance or Side Marker Light w/ Reflex Reflector - Submersible - 8 Diodes - Red Lens

(4189)

$8.44

16-14 Gauge Butt Connector - 5 Pack

(31)

$4.30

16 Gauge, 4 Conductor Bonded Parallel Wire - Per Foot

(237)

$2.87

2" Round Grommet - Flush Mount - Open Back

(283)

$3.55

Rubber Grommet for 2-1/2" Round Trailer Lights - Recessed Mount - Open Back

(83)

$6.93

2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 18" Lead

(74)

$3.47

Optronics LED Trailer Clearance or Side Marker Light - Submersible - 3 Diodes - Round - Red Lens

(2854)

$6.94

Question:

hello, I am needing a wiring harness for clearance lights on a dump trunk. There are three 2.5" clearance lights on the rear that snake up to two 2" clearance lights on either side of the dump bed. I am having trouble finding exactly what I am looking for.

asked by: Nick B

Expert Reply:

It sounds like you have three of the Optronics 2-1/2" LED Clearance Lights # MCL59RB held in place with the Rubber Grommet # A57GB and two of the Optronics 2" LED Trailer Clearance Lights # MCL55RB with the 2" Grommet # A54GB. If this is what you have all the lights use the 2-Wire Pigtail # A86PB and can be wired in using whatever length of wire is needed. We do have the Bonded 4 Wire # 16-4B-1 sold per foot that you can break into 2 wire strips for each side and connect using Butt Connectors # 05731-5.

If you have something else or had something else in mind please let me know and I will help you find the correct parts.