See what our Experts say about this Optronics Accessories and Parts

• Availability of Single Wire Plug for Optronics Clearance Light MCL67ARB
  If you are looking for the center section of the bracket that is in the picture you submitted of the # MCL67ARB that you referenced the correct part number you need is the # A65P that you referenced.
  view full answer...
  
• Will ThinLine LED Side Marker Light Fit A A65PB Black Molded ABS Bracket?
  Yes, The ThinLine LED Clearance or Side Marker Light # MCL61RB will work with The Black Bracket # A65PB. The side marker light is 4 inches long by 1-1/4 inches tall by 1 inch thick. The light has a snap-in surface mount with the bracket # A65PB. The Single Wire Plug for Thin Line Series Trailer Clearance and Side Marker Lights # A65P will help with the grounding which is through the mounting hardware. The Amber version light # OPT66FR will work with the same bracket and single wire...
  view full answer...
• Which Mounting Bracket for Optronics MCL61ARB Light
  I have a solution for you, but the # MCL61ARB does not fit in the # A67BB bracket. The # MCL61ARB light that you're using requires the # A65B bracket for mounting. You may also need the Single Wire Plug for Thin Line Series Trailer Clearance and Side Marker Lights # A65P since this light grounds through the mounting hardware (if you have a single wire light).
  view full answer...
• Mounting Base and Wiring Harness for Optronics Clearance Light # MCL63CAB
  There are different bases you can use for clearance light # MCL63CAB. You can use base # A65B that you have referenced. For that particular base you would use wiring harness # A68P. We also have base # A65PB or # A66PB. With these you would use wiring harness # A65P with the single wire because the light will ground through the mounting studs of these bases.
  view full answer...
• What Bracket and Wire Plugs Fit The Thinline LED Trailer Clearance Light # OPT66FR?
  You will need the Bracket # A65B with either the 1-Wire # A65P or 2-Wire # A46PB for the Thinline LED Trailer Clearance Light # OPT66FR.
  view full answer...
• Availability Of 2-Wire Pigtail For Optronics MCL63CAB And MCL63CRB
  Hello Christian. The two wire plug part A68P is unfortunately no longer available. We do still have the single wire plug # A65P but this will not work when mounting the light to a non-metallic surface. Since the 2-wire plug is unavailable, your best option will be to go with a different light such as the Peterson Piranha LED # 169A for amber and # 169R for red. These are surface mount lights with a 2-wire design. The wires are attached to the light so no additional pigtail is needed.
  view full answer...
• Recommended Amber LED Light that Measures 4 Inches by 4-1/4 Inches
  Hey Michael. I have a P2 rated light that fits all your specifications but I do not have a PC rated one. It is the Thinline LED Trailer Clearance or Side Marker Light item # OPT66FR. This Amber lens LED light measures 4" x 4-1/4". It has a P2 rating so the light is going to spread out 45 degrees to each side of its centerline but not 90 like the PC rated lights. You will need the Bracket item # A65B with either the 1-Wire item # A65P or 2-Wire item # A46PB for mounting the Thinline LED...
  view full answer...