Will the Miro-Flex, 2 Inch Round, LED Trailer Light, # MCL50RB, Fit an Enclosed Snowmobile Trailer

Updated 02/02/2012 | Published 02/01/2012

Products Featured in This Question

Miro-Flex LED Clearance or Side Marker Light w/ Reflector - Submersible - 9 Diodes - Red Lens

(854)

$9.11

2" Round Grommet - Flush Mount - Open Back

(301)

$3.99

2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 18" Lead

(75)

$3.74

Optronics LED Trailer Clearance or Side Marker Light - Submersible - 3 Diodes - Round - Red Lens

(3099)

$7.19

Question:

I am rewiring an enclosed snowmobile trailer. I currently have regular 2 inch round lights that are 11/16 inches deep. I would like to switch these to the miro-flex 2 inch round 9 led light. MCL50AB. This light is 1 3/16 inches deep. I assume this problem can be corrected with the correct rubber gromit but i may be wrong. I would prefer to keep the lights as flush mounted as possible. Any help is greatly appreciated

asked by: Mike K

Expert Reply:

If adding the Optronics light, # MCL50RB, you will need about 2 inches of space behind your existing light for it to fit. The reason is the Optronics light is deeper including the pigtail mounting surface and the pigtail, # A86PB. If you have at least 2 inches of clearance, then this light will fit in your existing 2 inch diameter hole with grommet # A54GB.

Light # MCL55RB is not quite as deep at 1 inch overall, so that is another option for you.

expert reply by: Michael H