bing tracking image
  1. Accessories and Parts
  2. Optronics
  3. Trailer Lights
  4. Wiring
  5. Plugs and Pigtails
  6. Two Wire
Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead
Optronics

Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead

Part Number: A46PB
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$4.69
Retail:$7.43
You Save: 37%
Accessories and Parts
Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead Wiring A46PB
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
2-Wire pigtail has a male plug on one end that pairs with the female connection on your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for side marker, clearance, and utility lights. 1-800-940-8924 to order Optronics accessories and parts part number A46PB or order online at etrailer.com. Free expert support on all Optronics products. Great prices and Fastest Shipping for Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (691)
  • Q & A (0)
  • Photos

Optronics Accessories and Parts - A46PB

  • Trailer Lights
  • Wiring
  • Plugs and Pigtails
  • Optronics
  • Two Wire
  • 6 Inch Long
  • Right Angle Pigtail

2-Wire pigtail has a male plug on one end that pairs with the female connection on your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for side marker, clearance, and utility lights.


Features:

  • Pigtail with 2-prong plug allows you to wire your Optronics light to your trailer
    • Designed specifically for use with Optronics side marker, clearance, and utility lights
  • Right-angle design of plug allows wiring to run down from the light rather than straight out of the back
  • Male-pin, 2-prong PL-10 molded plastic plug connects to back of trailer light
  • 2-Wire pigtail
    • White wire for ground
    • Black wire for power
  • Wire length: 6"


diagram of pigtail

Pigtail is a direct replacement for:

  • Uni Bond # PT6020
  • Wesbar # 108662
  • Truck Lite # 94902
  • Grote # 67050
  • Peterson #142-49
  • Bargman # 40-00-002


A46PB Optronics PL-10 Right Angle 2-Wire Pigtail for Trailer Marker/Clearance and Utility Lights

Alternate part number: A-46PB


California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.8

691 reviews
2-Wire pigtail has a male plug on one end that pairs with the female connection on your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for side marker, clearance, and utility lights.

by:

Good Price, fast shipping



by:

They work



by:

Looks Good



by:

great



by:

Direct replacement



by:

Very good service. QUICK!



by:

wire harnesshigh quality



by:

Just what i needed. Your Store is now on my favorites list.



by:

Products delivered as depicted at great price and prompt shipping.



by:

The connector was just what I needed and the shipping was fast and reasonable.



by:

Products were as advertised and, as usual, with etrailer orders, delivery was prompt.



by:

The wires are really straight and shiny. The connecter has that new connector feel and glossiness. The ring connector is solidly crimped. Truly an excellent piece of wiring.



by:

As described, excellent customer serviceand all my parts arrived in 2 days. Etrailer.com will get all my future business.



by:

Great product overview after asking online, ordered, quick order acknowledgement and shipping info; received in 2 days and fits exactly like it was supposed to. Will order again from this firm, if necessary, in the future.



by:

Replacing the wiring on my trailer so I am replacing the plugs to the marker lights and tail lights too so there is no problems. Well made, fast shipping so I will buy from E-trailer again.



by:

Perfect replacement for the wire that ended up on the side of the road! The broken fender and light made it and this wire was the exact replacement I needed to reuse the old light.



by:

Great product for my boat trailer marker light. Product shipped quickly, as usual, from etrailer. I have never been disappointed with any product or service from this company. Another 5 star review!!

Donald profile picture

Donald

8/1/2025

It’s been a year and my marker lights are still shining bright and working like a champ! The LED’s in these markers are incredibly bright!! Excellent product!



by:

Here is the light I bought from etrailer.buyers work lights and optronic marker lights. Very nice Very bright.



by:

I ordered a Optronics trailer tag light which I received promptly, but It didn't have the electrical plug. This was my fault for not reading the description. The plug is sold separately. I ordered the plug and got it in three days. It fits perfect. I have not used it yet, as I have not finished my trailer.



by:

Perfect fit and fast shipping



by:

Fit the Optronics trailer lights, like they were made for it



by:

It would have been nice if, when they went with this new connection that there you’d provide a spacer sa standoff for the fixture. I have the “old design light and only a3/8” access hole through the trailer frame for the wires.



by:

I did not give all 3 item a 5 star rating. I only gave the right angle two conducter wire a 5 star rating. The recessed lights are ok, but one of the rubber grommets did not fit correctly. That was disappointing



by:

This did not fit the reverse light side of the light like it said on website you need to use 2 3pin pigtails.

Brian profile picture

Brian

7/5/2025

Ok



by:

Great Service and Selection for all things Winnebago.
Many thanks to David Straw for his professionalism and helping me find the correct part for my 20 year old motor home.

Doug profile picture

Doug

2/7/2025

Still Working perfectly

Jon G. profile picture
Etrailer Expert

Jon G.

2/8/2025

@Doug Great to hear!

25
691
Show More Reviews

See what our Experts say about this Optronics Accessories and Parts

  • Does Optronics Clearance Light A91RB with Base A91BOB Have Clearance for 90 Degree Mount
    Hey Jim, yes the Mounting Bracket # A91BOB with the clearance light part # A91RB would allow a right angle pigtail like the part # A46PB to fit and have enough clearance.
    view full answer...
  • Replacement Lens Availability for Reflect-O-Lite SAE-P-P1-68
    Unfortunately we do not have any replacement lenses for your Reflect-O-Lite lights. There may be some out there somewhere but the only solution we have for you would be to replace all of your lights. If you end up wanting to do this I can help you with replacement lights but it may be worth seeing if somewhere else has replacement lenses.
    view full answer...
    Image 1 for
  • Spacing Between Two Electric Connectors On Thinline LED Clearance and Side Marker Light AL91RB
    Hello Jeff, thanks for reaching out. The two electric connectors on the Thinline LED Clearance and Side Marker Light # AL91RB are indeed 1/2" apart on center. This will work with really any standard 2-prong plug. They would all use that standard 1/2" pin spacing. For example, the Right Angle 2-Wire Pigtail for Optronics Trailer Lights # A46PB will go with it.
    view full answer...
  • Replacement Grommet for Optronics
    Hey Jay! I am definitely going to need you to send me those pictures to the email address you receive this response from. Meanwhile I have listed some of the parts I think you described below along with that grommet you need: Grommet for Optronics A91, AL82, AL90, AL91, or AL191 Series Trailer Lights - Black PVC item # A91GB Replacement Pigtail - 3-Wire - 90 Degree item # 40-00-004 Right Angle 2-Wire Pigtail for Optronics Trailer Lights item # A46PB What kind of trailer do you have?
    view full answer...
  • Two Prong Connector To Use with TecNiq Side Marker with Reflector # TN53TR
    Hey Wade, the 2 wire connector you need to use with the TecNiq trailer taillights part # TN53TR is the part # A46PB.
    view full answer...
  • What Size Hole is Needed to Mount Optronics 2-1/2 Inch Side Marker Light with Reflector and Grommet
    The Optronics Sealed 2-1/2 Inch Round Trailer Clearance, Side Marker Light # MC57AB along with the Round Grommet - Floush Mount # A55GB will require you to cut a 3 inch diameter mounting hole. You will also need the Right Angle 2-Wire Pigtail Plug # A46PB to pair with the female connection on the Optronics light. I have attached video reviews of these products for you to look at.
    view full answer...
  • Surface Mounting Bracket For Custer LED Side Marker/Clearance Light CPL26-A
    Hi Adam! We do have another option that will fit the exact same way, but I am sad to say the Custer bracket is no longer available. The Custer LED Side Marker or Clearance Trailer Light # CPL26-A snaps into the Optronics bracket # A91CB perfectly (almost too perfectly as it took a slot screwdriver and some patience to get it out when I test fit them together). Unfortunately, it does only come in silvery chrome finished plastic, but it could very easily be rattle canned to whatever color...
    view full answer...
  • Availability Of White Replacement Fender For 2003 Shoreland'r Trailer W/ ST205/75R15 Tires
    I sure can! Based on the picture you provided the correct replacement fender for your trailer is going to be the Plastic, Single-Axle Trailer Fender w/ Top and Side Steps - White - 13" to 15" # PF11X35W which will work perfectly with the ST205/75R15 tires on your 2003 Shoreland'r Trailer and closely resembles your current fender. You will also need mounting brackets # PF1135-BKT-2 to mount the fender to your trailer. In regards to the clearance lights I will need to know the length...
    view full answer...
    Image 1 for Image 2 for
  • LED Clearance Light Recommendation for Sundowner Horse Trailer
    What you have on your horse trailer is a pretty common clearance light that we do offer in red and amber as an LED. For the red you'd want the part # AL91RB and for amber part # AL91AB. You'll also need the grommet part # A91GB and the right angle pigtail part # A46PB and you'd be set.
    view full answer...
    Image 1 for
  • Replacement Taillights, Wiring and 7-Way Connector for Car Hauler
    To fit the round 4-1/2 inch holes on your trailer for the rear brake lights you could use the # STL42RB as this will fit in that hole. For a pigtail harness you would also need # A45PB. For the side clearance lights you would need to enlarge the holes to 3 inch in diameter, use the # A55GB as a grommet and then use # MCL59AB for the lights and # A46PB as a wiring harness. For a replacement 7-way with 8 feet of wire for running new wire everywhere you would want the part # H20046. You...
    view full answer...
    Image 1 for
  • Replacement Amber Clearance Light for Dutchman Kodiak
    The lenses on clearance lights are not generally removable as they are often "sonically sealed" such as the Optronics Trailer Clearance or Side Marker Light # MC57AB; this means they are submersible. Instead of buying a light and taking the lens off I strongly recommend an LED Trailer Clearance or Side Marker Light w/ Reflex Reflector # MCL59AB for your Dutchman trailer because an LED is a far better, much longer lasting option. You only need to make sure your existing lights have the...
    view full answer...
    Image 1 for
  • Replacement Trailer Clearance Light for PM150
    The most similar trailer clearance lights we offer to replace the PM150 lights you have now would be the Thinline LED light part # AL91RB. For a replacement harness that would plug into this you'd need the part # A46PB and then for a grmmet part # A91GB for a flush mount or part # A91BOB for a bracket for surface mount.
    view full answer...
    Image 1 for
  • Replacement Clear Marker Light For a Glo-Brite 9500c-88
    While we do not carry the Glo-Brite 9500c-88 you currently have, we do have a light that will work as a replacement for you. From the information I could find on your Glo-Brite 9500c-88, it measures 2" in diameter. For the clear light, you would want the Optronics Miro-Flex LED Utility Light # UCL50CB. This light measures 2" in diameter and should fit in your current grommet. You would also need the 2-Wire Pigtail for Optronics Trailer Lights # A46PB. If you want to replace the grommet...
    view full answer...
  • Replacement Clearance Taillight Solution for EZ Loader 250-032130
    I looked up your EZ Loader part number and it appears to be the same design as the part # AL91AB which for the matching grommet you'd then need the part # A91GB. You'll also need the wiring harness # A46PB.
    view full answer...
  • Recommended Round Trailer Marker Lights to Fit in 2-3/4 Mounting Hole
    The # MC56RB you were looking at is designed to fit in a 2-3/4" diameter hole and will have mounting holes 2-11/16" apart, so these will work for your 2011 PJ Dumper trailer. If you also need new pigtails for the wiring, you can use the # A86PB or the # A46PB (right angle pigtail). I've linked some review videos of these parts for you to have a look at.
    view full answer...
  • Replacement Alternative for the Globrite Part 9500-88-BLU
    I do have options for you but we do not carry the Globrite part 9500-88-BLU. However, based on my research this light has a clear lens with an LED bulb and measures to be 2" in diameter x 1" deep. For a replacement, I recommend using the LED Trailer Clearance/Side Marker Light part # MCL55ACB for amber or part # MCL55RCB for red. This light has a clear lens with LED bulbs and dimension of 2" in diameter x 1" deep. In order to install this light you will need to use the pigtail part #...
    view full answer...
  • Trailer Clearance Light Recommendation to Fit 2-3/4 inch Diameter Hole
    For a grommet that fits the diameter hole of 2-3/4 inches we have the part # A57GB which fits lights that are 2-1/2 inches in diameter like the Miro-Flex LED Trailer Clearance or Side Marker Light # MCL51RB. You'd need these two things plus a wiring pigtail part # A46PB and you'd be set.
    view full answer...
  • Does The Optronics LED Side Marker Light # AL91AB have 2 Male Connector Posts
    Yes, The Thinline LED Clearance and Side Marker Light # AL91AB has 2 male connector posts on it. This waterproof trailer light functions as both a clearance light and a side marker light when properly mounted. It is 2-1/2 inches long by 1-3/16 inches wide by 7/8 inches deep. The Right Angle 2-wire pigtail # A46PB and The Mounting Bracket # A91BOB are sold separately. I attached a review video link below.
    view full answer...
  • What Size Hole Needs to be Drilled to Install 2-1/2 inch Optronics Clearance Light MC57RB
    The Sealed, 2-1/2" Round Trailer Clearance, Side Marker Light with Reflector # MC57RB requires the use of a the Grommet part # A55GB to install. This grommet will require a 3 inch hole to be drilled. For a pigtail harness you would need the part # A46PB as well.
    view full answer...
  • Procedure to Re-Install Trailer Side Marker Lights
    Installation methods will vary depending on the nature of the particular light you are using. We offer a wide range of clearance/marker lights (all can be seen on the link provided) and these include flange-, flush- and surface-mount types. You can use the filters in the left-hand margin to narrow the product results shown to just those light that meet your requirements. You can sort by lens color, bulb type, mounting type, brand and dimensions. For example, in 2-1/2- x 1-1/2-inch size...
    view full answer...
  • Trailer Wiring and Lighting Replacement for Trailer with 4.5 inch Red and 2.5 inch Amber Light
    For a 4-1/2 inch diameter trailer taillight that can do stop/tail/turn functions we have the part # STL43RB which would work well. For a rubber grommet then we'd need the part # A45GB. Then for a pigtail harness you'd need the part # A47PB. For the 2-1/2 inch amber lights you'd want the part # MCL59AB and for a grommet for this you'd need part # A55GB. For a pigtail for this you'd want part # A46PB. Then for 4-way wiring sold by the foot you'd want the part # 16-4B-1.
    view full answer...
    Image 1 for
  • Replacement Clearance Light for my 2004 Winnebago Minnie Winnie
    The Optronics Trailer Clearance or Side Marker Light part # MC57AB can be used with or without a grommet it is a standard size type light that can be utilized many different ways. As for the pigtail as you said in theory should be there but it always varies and in some cases it won't be there. I would pick one up and add it regardless just to make changing it in the future much easier if need be. The Right Angle 2-Wire Pigtail for Optronics Trailer Lights part # A46PB is the one to use.
    view full answer...
  • Recommended Amber Clearance Light To Replace Glo-Brite 9500-88
    I would be happy to help! While we do not carry the Glo-Brite 9500-88 you have in your trailer, we do have a light that will work as a replacement for you. Based on the information I could find on your light it measures 2" in diameter, and based on the picture you provided it mounts in a grommet. We have the Miro-Flex LED Clearance or Side Marker Light w/ Reflector - Submersible - 9 Diodes - Amber Lens # MCL50AB which is 2" diameter and will fit perfectly in your grommet. You will need...
    view full answer...
    Image 1 for Image 2 for
  • Incandescent and LED Lights to Replace Wesbar Amber Marker Light # 203367
    The original part number you referenced, 203367, is the stock number for a light made by Wesbar, a producer of OEM and aftermarket trailer lighting. Their waterproof LED equivalent version, part # 47-203667, is indeed an exact drop-in replacement for the incandescent version. This light assembly uses a pigtail wire harness for connection, part # A46PB, and a rubber mounting grommet # 221588.
    view full answer...


< Previous
123. . .6



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Patrick B
Video Edited:
Patrick B
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Andrew L
Video by:
Andrew L
Employee Laura H
Updated by:
Laura H
Employee Amy B
Updated by:
Amy B
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee Noah M
Updated by:
Noah M
Employee Cole B
Installed by:
Cole B
Employee Shane T
Installed by:
Shane T
Employee Brent H
Installed by:
Brent H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<