bing tracking image
Last Chance for 2025 Savings!
SAVE NOW
Customer Service My Orders
Q & A Icon

Trailer Wiring and Lighting Replacement for Trailer with 4.5 inch Red and 2.5 inch Amber Light  

Updated 06/25/2018 | Published 06/22/2018

Question:

the old lights I pulled off measured: stop/tail/turn = 4 1/2 clearance = 2 1/2 they had round rubber seals to hold them in place. Im wanting to replace the kit from hitch to rear of trailer. Just asking for advice so I dont miss anything. basically, I need a kit with harness, 2 amber running lights and the stop/turn/tail assembly for a 5yard bumper pull dump trailer.

0

Expert Reply:

For a 4-1/2 inch diameter trailer taillight that can do stop/tail/turn functions we have the part # STL43RB which would work well. For a rubber grommet then we'd need the part # A45GB. Then for a pigtail harness you'd need the part # A47PB. For the 2-1/2 inch amber lights you'd want the part # MCL59AB and for a grommet for this you'd need part # A55GB. For a pigtail for this you'd want part # A46PB.

Then for 4-way wiring sold by the foot you'd want the part # 16-4B-1.

expert reply by:
0
Jameson C
click to enlarge
Ask The Experts a Question >>

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>