To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This hitch is rated for 20,000 lbs gross towing weight and a 5,000 lbs vertical load limit, so it’s ready for large fifth-wheel campers and toy haulers. The thick, dual-jaw design wraps fully around the king pin for solid 360-degree contact. That means less rattle and more control when you’re pulling weight through rough roads or across long miles. The gray powder-coated steel construction stands up well to weather and corrosion, keeping everything tight and secure tow after tow.
Short-bed truck owners will appreciate the built-in slider that gives you 12" of fore and aft travel. At slow speeds, that extra clearance between the cab and trailer makes backing into tight spots or fueling up much easier. The slider moves smoothly on its base, so you can handle those close turns without worrying about contact or binding.
The cam-action latch is made to release cleanly—even when the ground isn’t level. If any binding pressure builds up between your truck and trailer, just move the handle to the open position, then roll forward slightly to pop the jaws loose. It’s a simple mechanical design that works reliably every time. The handle includes a pin and clip to keep it locked while towing, or you can use your own padlock with a 5/16" diameter shackle for added security.
The head pivots both front-to-back and side-to-side to follow your trailer’s movement better and reduce chucking. Polyurethane bushings sit between the pivot arms and head for a cushioned connection that cuts down on metal clank and vibration. That means a smoother, quieter ride inside the cab on long hauls or uneven stretches of road.

When you’re done towing, this hitch breaks down into two main pieces so you can lift it out without heavy equipment. The Turnoverball gooseneck hitch underneath doubles as your mounting kit—just remove the fifth wheel base from the ball hole for full bed access. The system uses a single 4" diameter hole in the bed for the hitch ball and doesn’t require drilling or welding into the frame. When you need to switch over to gooseneck towing, install the included 2-5/16" ball with safety chain loops rated at 30,000 lbs GTW and 7,500 lbs vertical load limit for another strong towing option.


This fifth-wheel trailer hitch is not compatible with Sidewinder or Revolution king pins. Do not use any device that changes the pivot point of your trailer's king pin with this hitch.

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the BMW Turnover Ball Under Bed Gooseneck Trailer Hitch. It has a 30,000 pound weight capacity. Now this is a heavy duty under bed hitch that will let you tow your gooseneck trailer, and what's nice is with this BMW Turnover Ball Under Bed Gooseneck Hitch, you get the best of both worlds. When you go to tow, the turnover ball creates a nice sturdy, dependable connection with your gooseneck trailer and then when you're done towing, you can stow the ball upside down in the hitch to get a full truck bed access and clean appearance. Basically to do that all you have to do is take this access handle, pull it into the open position, take your ball out, flip it right over, there's a little handle on the bottom of it, flip it upside down, drop it back into the hitch, release the handle, and it's locked into place. This is under the bed, so you have full truck bed access.Now on the end of this handle there's a 5/8 inch thick spring loaded steel locking pin on the end of the handle.
It goes all the way through the ball, secures it into place. And this handle you will access at your rear diver's side wheel well. Let's go ahead and take it back out.Now on this hitch they do use a single piece machine ball socket. Provides nice rugged durability. If you look on the hitch ball itself it's a square ball base.
Prevents the ball from turning in the hitch during hook up. And if you notice the edges of the corners, they are chamfered. They call that a corners only fit, and basically that will prevent the grime from building up inside the hitch. So when you drop it into place, it's open on the corners and the dirt will fall through, it doesn't build up. Also, if you notice it does include these spring loaded safety chain hook ups which are built in.And to install this it's a very simple installation.
Now a custom installation kit is required. We do sell that separately on our website. You just put in your year and model vehicle and it will show you what installation kit's needed. And then this will bolt right into the center of that installation kit. Now you do also have to drill a four inch diameter hole into the truck bed to be able to access the opening.
And then four 1/2 inch diameter holes for the safety chain hook ups.Now this is a nice powder coated steel. It's very sturdy and corrosion resistant. The parts are made in the USA. A few specs on this again, the gross towing weight capacity is 30,000 pounds, ton weight capacity is 7,500 pounds, and the hitch ball, the gooseneck ball size is a standard 2 5/16 diameter. But again, it's locked into place, so you're ready to tow. When you're done towing, it's not licked into place when you release it, and then that locks it into place. And then to remove it, just pull it out, twist it to lock it, pull it out. To store it, flip it right over, release the pin and it's locked into place.But that should do it for the review on the BMW Turnover Ball Under Bed Gooseneck Trailer hitch with the 30,000 pound weight capacity.
Ratings & Reviews

Leon
12/3/2025
It is still the best 5th wheel hitch that Ive owned. Very minor maintenance required. Just a little white lithium grease on the swivel points and a Teflon plate instead of grease.

Tim
3/19/2019
I’m still very impressed with this hitch no problems and no slop

Gary
12/13/2024
The B & W Companion hitch has serviced us very well for the last year. Weve been out on about 8 trips during the past year.

Dennis A.
2/3/2020
Very Good, just wish I had got without slider as never use this part. When I tried to use it it would the fifth wheel would hit to of tail gate. I have no problem at cab of truck when forward. E trailer is my first choice when I make a purchase for my truck.

Dale F.
12/23/2019
Every thing has been working good. Seems to take a good jolt to get it to slide with the trailer attached. Still a great product

Mike L.
2/27/2019
Youll want to make sure that the slider rails are lubricated. Also keep in mind that if the truck and trailer are at different angles and theres a lot of pressure placed on the sliding mechanism, it can bind.

Tracey H.
4/5/2020
A year later, and it still works the same. Slider still doesnt work. but havent needed it. One thing I have learned is to make sure the lug from the attachment is lubricated before placed into the receiver. After about 8 months of being in the bed, I tried to remove it. Whoah! That was a son of a gun. Finally got it to break free, and then it lifted out. both the lug of the companion hitch, and the receiver of the B&W are nicely powder coated. that powder coating locked together. Nothing patience and a pry bar couldnt fix. But I dont want a repeat. Over all, I may look at something easier for our next travel season.

Tim
1/17/2022
After a year of use this is still an outstanding hitch. It is sturdy and solid. No issues at all. Very pleased with my purchase.

Joe G
6/7/2021
Great ProductWorks great with our 5th wheel. Very easy to connect and disconnect. Love it.

Syd C.
3/14/2021
Still works great. Have taken quite a few trips around my state and a nice trip to the beach. This hitch has allowed me to get into places that I shouldn’t and get out of those place I dang sure shouldn’t have tried to fit.
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Gwendolyn Y.
4/30/2026
Looks great in your truck. Thanks for always relying on us, Christopher! We will always be here when you need us next.