bing tracking image
Q & A Icon

Recommend 5th Wheel Hitch for a 2019 Ram 3500 6-1/2" Bed with a B&W Turnover Ball  

Updated 07/25/2026 | Published 07/19/2026

Products Featured in This Question



Question:

just ordered the BW turnover ball for my 2019 ram 2500 6.4 hemi. 6.5 bed . what will be the best hitch for my setup, will have a fifth wheel which has a curt helix pin box ?

0

Expert Reply:

Nice setup Jeff, happy to help!

Since you've already ordered the B&W Turnoverball for your 2019 Ram 2500, my recommendation is the B&W Companion Sliding 5th Wheel Hitch # BWRVK3400-5W that's designed for the Turnoverball system. It's one of our most popular hitches thanks to its dual jaw design, smooth ride and easy removal when you need full bed access.

The Curt Helux pin box is fully compatible with the B&W Companion, so you won't have any compatibility issues with that combination.

Which fifth wheel are you towing?

expert reply by:
0
James D
Jeff A. profile picture

Jeff A.

7/23/2026

Yes that is what I was looking at. fifth wheel is a Cougar 26res. Thanks Jeff

James D. profile picture
Etrailer Expert

James D.

7/24/2026

@JeffA Nice! I think you'll be very happy with that combination. If you have any questions during the installation or hitch setup, just let us know we're always happy to help!
Marc profile picture

Marc

7/24/2026

The B&W slider is the way to go since you’ve already got the turnover ball and a short bed. You could save a few bucks and get the non-sliding version but the 1 time you’d need it and not have it, you’ll end up with a nice little crease on the cab of your truck. The B&W setup is a great match up and the B&W customer service is top shelf. A real person, in America, will answer the phone.

Gary K. profile picture

Gary K.

7/24/2026

I use the same setup in my 2016 Ford F350 short box. It works great. The slider works easy and the fifth wheel latches reliably. The hitch is very strong. The only drawback is its weight, it is very heavy. Nothing you can't overcome with some imagination.

Leon profile picture

Leon

7/25/2026

I bought the B&W Companion Slider because I already had the Turnoverball and didn't want rails in my truck bed. That combination has worked out great. A couple of things to know: the hitch weighs about 300 pounds, so it's not light. Also, don't forget to put anti-seize on the bolt you tighten to secure it. It'll make removal much easier later. The slider operates smoothly unlike some other hitches I've owned. It's also very smooth towing down the road. I've owned several fifth-wheel hitches over the years, and this is by far the best one. I wouldn't hesitate to buy it again.

Lubing T. profile picture

Lubing T.

7/25/2026

@Leon Lubing the threads is not a bad idea. It will prevent galling for more consistent tension and, as you say, make it easier to loosen the bolt. The danger is over stressing the bolt and the patch pin. The torque must be reduced proportional to the type of lubricant used. There is information available to help you decide how much to reduce torque.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>