8-5/8" Long x 3-1/4" wide x 2-5/16" thick. Incandescent trailer light illuminates your license plate. Surface mounts to trailer with mountingbracket - hardware not included. 2-Wire ... systems Surface mount to trailer with mountingbracket - hardware not included 2-Wire design with power and ground wire DOT compliant Specs: Dimensions: 8-5/8" Long x 3-1/4" wide x 2-5/16"
7-9/16" x 3-5/16" Oval. 3-Function, waterproof LED light acts as brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware ... Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting
Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Stud mount with stainless steel hardware and included license plate bracket ... housing and acrylic lens Red lens over clear LEDs Stud mount Stainless steel mounting hardware included 25' Wiring harness with 4-pole connector DOT approved Specs: Application: trailers under 80"
2-1/2" x 1-3/16" Rectangle. Waterproof trailer light functions as both a clearance light and a side marker light when properly mounted. Requires mountingbracket and plug (both sold ... and housing Amber lens Multiple mounting options Surface mount with open-back or self-grounding bracket (sold separately) Recessed mount with grommet (sold separately) Accepts industry-standard 2-prong plug
8-5/8" x 3-1/4" x 2-5/16". Waterproof trailer light illuminates your license plate. Durable ABS housing. Clear lens under polycarbonate housing. Surface mount on 3-1/2" centers ... Clear lens with white LEDs Steel bracket construction resists corrosion Mounts on surface of trailer with included bracket Installation hardware not included 2-Wire pigtail - includes power lead
2-1/2" x 1-3/16" Rectangle. Waterproof trailer light functions as both a clearance light and a side marker light when properly mounted. Requires mountingbracket and plug (both sold ... and housing Red lens Multiple mounting options Surface mount with open-back or self-grounding bracket (sold separately) Recessed mount with grommet (sold separately) Accepts industry-standard 2-prong plug (sold
Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Universal mount with stainless steel hardware and included license plate ... No bulbs to replace No brittle filaments Corrosion-resistant license plate bracket Durable polycarbonate housing and acrylic lens Red lens over clear LEDs Universal mount Stainless steel mounting hardware
Waterproof clearance/marker light can be installed on either your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. Surface mount ... bracket - hardware not included 2-Wire pigtail - includes power lead and ground wire DOT compliant P2 rated Specs: Dimensions: 8-1/2" long x 1-11/16" tall x 13/16" deep Mounting hole
20-1/2" x 1". 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface - hardware not included. 4-Wire pigtail ... will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers. Surface mount - hardware ... stainless steel hardware included Includes license plate bracket for mounting driver's side light 3-Wire pigtail 25-Ft Wiring harness for making connections DOT compliant Meets FMVSS 108 and CMVSS 108
8-5/8" x 3-1/4". LED trailer light with ABS mountingbracket illuminates your license plate. Durable polycarbonate lens and housing. Surface mount to trailer with bracket. 2-Wire design. output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount to trailer with ABS plastic mountingbracket
8-11/16" x 3-3/16" Rectangle. Low-profile RV light serves 4 functions: brake, tail, turn, and license plate light. Built-in license plate bracket. Snap-on lens. Mounts on surface of trailer ... Compatible with 12V DC systems Mounts on surface of trailer with built-in license plate bracket - hardware not included 3-Wire pigtail White wire for ground Black wire for tail light Green wire for stop/turn
7-9/16" x 3-5/16" Oval. Waterproof 3-function LED trailer tail light acts as a brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - ... flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting
7-1/2" x 3-1/4" Oval. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange - ... . This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
8-1/4" x 3-1/4". Incandescent marker light mounts on your trailer fender. Built-in reflex reflector. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket ... mountingbracket Pre-wired design includes female barrel and grounding eyelet DOT complaint P2 rated Specs: Configuration: passenger side Driver side: BA44FNL - sold separately Dimensions: 8-1/2" long x
3-15/16" x 1-1/4". Waterproof LED marker light can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. Hardwired ... : Quantity: 1 fender light Dimensions with bracket: 4-1/16" long x 1-1/4" tall x 1-1/8" thick Light dimensions: 3-15/16" long x 1-1/4" tall x 7/8" thick Distance between mounting
7-1/2" x 3-5/16". 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Surface mount with built-in flange. Plugs ... the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used
10-1/8" x 3-1/16" Oval. 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface with built-in flange - hardware ... or circuit board. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often
2-1/2" Round. Low-profile LED trailer light serves as either a side marker or clearance light. Built-in reflex reflector. Snap-on polycarbonate lens. Surface mount with included gasket - ... on your trailer - one as a front or rear clearance light and one as a side marker light. Surface-Mount Light Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights
Filter Results
