|
Thule's Roadway bike carrier, for up to 2 bikes, has the quick and easy "Hitch Switch" that alllows you to just flip the switch to fold the bike carrier down, away from the rear of the vehicle. This switch also makes it super convenient to fold the arms down when not in use. The dual-arm construction with rotating cradles lets you carry a wider variety of bikes without use of an adapter. Anti-sway strap and built in anti-rattle device keeps movement to a minimum when travelling.
Thule Roadway™ 2 Bike Carrier for 1-1/4" and 2" Trailer Hitch Receivers
- Features:
-
- Hitch mounted rack carries up to 2 bikes.
- Includes Thule Stinger Swinger™ which allows you to easily change the the 1-1/4" shank to a 2" shank and vice versa for use on either size trailer hitch.
- Thule Hitch Switch™ dual quick-release levers make it easy to tilt the rack forward for rear access of the vehicle. Also makes folding the arms down for storage a breeze.
- Dual bike carrier arm design offers best bike fit, minimizing the need for top-tube adapters.
- Specially designed T3 cradles lock down bikes while still allowing complete adjustment along the bike rack arms.
- Soft rubber straps secure bikes to cradles on either side of bike carrier cradle.
- Built-in anti-rattle device reduces the vibration and noise of the rack in the hitch.
- Optional Snug Tite™ lock (# THSTL2) is available to fit over anti-rattle device and secure the carrier to the hitch.
- Carrier includes an anti-sway strap to reduce movement of handle bars and wheels on bikes when in transport.
- Can be upgraded with No Sway Cage™ accessory (# TH955) which works exclusively with T3 cradles and prevents bikes from rocking back and forth on carrier.
- Specs:
-
- Carries up to 2 bikes.
- Weight Capacity: 70 lbs.
- For use with 1-1/4" x 1-1/4" and 2" x 2" trailer hitches.
- Measures 10-1/2" from center of pin hole to upright bar of bike carrier.
- Replaces Thule Hitching Post Pro Hitch Mounted Bike Racks (# TH937XT & TH936XT).
Thule Hitch Switch™
This lever is used at two places on the Thule Roadway bike carrier. One lever is at the base of the rack, where the shank (part that slides into the trailer hitch) is connected to the upright bar. By simply lifting up on the lever (the hitch switch), it allows the upright bar to tilt forward. To raise the rack back into position just push the rack towards the vehicle until you hear the hitch switch click into place. The hitch switch is also located at the top of the rack where the two arms that carry the bikes meet the upright bar. Again, simply lift the lever to fold the arms down for storage. This is much easier than messing around with pins, clips and cables.
Thule Stinger Swinger™
The piece of the rack that slides into the trailer hitch on the vehicle is often referred to as the base, shank or stinger. The stinger on this Thule bike rack can easily be switched from the 1-1/4" x 1-1/4" size to the 2" x 2" size by sliding a one piece, 2" sleeve over the 1-1/4" stinger. It is held in place with one screw.
Replaces Thule Hitching Post Pro Bike Racks TH936XT and TH937XT
Find more products like me in:
1-1/4" Bike Racks,
2" Bike Racks,
2 Bike Racks,
Dual Arm Cradles,
1-1/4" - 2 Bike,
2" - 2 Bike,
THULE Bike Racks,
1-1/4" Class I Bike Rack,
Thule Carriers,
1-1/4" Tilting Bike Racks,
Thule Hitch Racks,
Hitch Bike Racks,
2 Bike Hitch Racks,
Frame Mount Cradles,
1-1/4" & 2" Bike Racks,
1-1/4" Frame Rack,
1-1/4" & 2" Tilting,
Tilting Frame Racks,
2" Frame Racks,
1-1/4" & 2" Frame,
2 Bike Frame Racks
|
See Larger
