Great for cabinets, toolboxes, and panels in your enclosed trailer, this piano hinge provides uninterrupted support for your door. The hinge rotates 270 degrees and contains no pre-drilled holes, so it can be welded or drilled to match your setup.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this 72 inch long by two inch wide stainless steel piano hinge. Now, this hinge will provide a nice, sturdy, continuous support along the length of your cabinet, your door or panel. It is great for oversized doors, trailer doors, entrance doors. And this hinge will provide a nice, more support than multiple small hinges.
And it is a continuous design, so it does reduce the stress on the hinge when used with heavier doors. Wanna zoom in just to show you up close. This hinge will rotate 270 degrees for a full opening and closing motion. Just to show you that, if we rotate the top part back 90 degrees and then we can rotate it forward a full 180 degrees, that'll get you your 270 degrees of rotation. It is a nice, durable stainless steel construction, helps resist corrosion.
Does have a 2B mill finish, which gives the metal a nice, bright shine. And this is a weld-on or bolt-on installation. Now, if you do bolt it on, it does require drilling holes into the hinge. And this hinge can be cut to the specific size for your application. It is made in the USA.
Do some specs on this, we're gonna do the overall length. So, right now, if we take a tape measure and we go from one end, all the way to the other end, 72 inches, so six foot in length. The open width, which would be like it is right here. I'm gonna zoom in again so you can see better. Right now, it's in the full open width.
So, if we put our ruler on that, you can see is right at two inches. The knuckle length, each one of these little sections here is a knuckle, so the length on those knuckles are half an inch. And the pin diameter that goes through here, the solid pin goes through the knuckles, holds both pieces together, diameter on that pin is 3/16 of an inch. But that should do it for the review on this 72 inch long by two inch wide stainless steel piano hinge..
Average Customer Rating: 4.8 out of 5 stars (376 Customer Reviews)
Great for cabinets, toolboxes, and panels in your enclosed trailer, this piano hinge provides uninterrupted support for your door. The hinge rotates 270 degrees and contains no pre-drilled holes, so it can be welded or drilled to match your setup.SUPER Service .... Highest QUALITY Product ... Will Buy From Again
Very impressed with the quality this hinge. I had to repair my FlipBak tonneau cover. This hinge will provide superior security over the original piece of rubber that those tonneau covers use as a hinge.
Thanks for the excellent customer service.
Work great. More sturdy than piano hinges on concession trailer.
3 stars, due to packaging. Ordered 3 inch by 72 inch piano hinge. Packaging tube arrived without hinge, cap on end was missing.Went to post office to see if they seen it and they did. Brought it home and is in working condition.
Very well constructed as we needed a heavy duty weld on hinge and this was the only hinge in the market to meet our application.
Fast service great feedback and properly packed for safe delivery as we live in an industry where what arrives and in what condition is always an unknown.
I highly recommend this vendor. I will be purchasing more products from their large selection.
2 thumbs up!!
used cobalt drill bit drilled 4 holes in hinge on corners with paper to keep door space for future paint ,drilled holes in hinge only just touch wood ,undid 4 screws ,recessed wood with bur thing ,punched stainless hinge into wood, screwed in screws near flush ,very clean super price and strong ,thank you
The hinge was perfect and was exactly what I needed. The customer service was second to none! They upgraded my regular ground shipping to 3 to 5 day at no additional charge. I wish the other companies I do business with had the customer service like etrailer.com does.
Just what I was looking for!
I plan to hinge my shop stairs,pictured in the attached photo.
It arrived on time perfectly protected with no damage. This was a last minute project that was dropped on me and I was scrambling to to find the components. etrailer was easy to scroll through and easy to complete my purchase.
Nice heavy duty hinge. We used them as a replacement for the rusted light duty hinge on our custom hunting camp trailer. Received them quickly and in time to installed before the 2022 deer season.
I tried ordering this same hinge through a hardware supplier and they couldn't get it. I found this on a web search and couldn't believe E-trailer had it in stock, it came within two days. Happy to get this project done!
Highly recommend. This is a very heavy duty hinge.
This is the item I needed and it was sent out and received very fast, very pleased with the product here for my enclosed race trailer to help with my need after I had upgraded my trailer floors & ATP ramp door flap. Item was just as described in the video upon ordering off the website.
Thanks
Product as described, good quality and function
I
Was very surprised with the quality of the hinge for the price. etrailer went above and beyond with packaging and shipping. Was worried that hinge would be bent in shipping because of it size but it was packed in a really strong tube. Product arrived 2 days before the estimated date. Will definitely be a repeat customer. I’m glad I stumbled upon etrailer and look forward to using them a lot more for my business. Thanks etrailer.
Good hinge. Fast shipping
Everything is working as it should. Way better than the aluminum ones that where on thereForsure.
Worked out great for my trailer build and made thing a lot easier for making a heavy duty tool box door in the v of a tag trailer
The product was as described with good pricing. The website was easy to use and shipping was fast. Thank you.
It was shipped in a timely manner safe and I damaged. I used it to replace a toolbox lid hinge. It was a little overkill on size but it has worked so far. Thank you for supplying me with a great product.
needed to build a few ramp door extensions. these hinges fit the bill and for a great price too.
Came a little bent from shipping but I can work with it , looks pretty strong will install hung this weekend. Thanks
Thank you very much for fulfilling my needs
Ordering was simple. The process was quick. Service was great thank you.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.