2" Wide Continuous Hinge - 6' Long - Steel

See what our Experts say about this Polar Hardware Trailer Door Hinges

• Is the Width of the Redline 2 inch Steel Hinge Measured Folded or Unfolded
  I spoke to my contact at Redline and he informed me that the 2 inch width is measured when the Redline 2 inch Wide Continuous Steel Hinge # H200 is unfolded.
  view full answer...
• Can Wider Wheel/Tire Combo Be Used On Snobird Trailer
  We do have a tire/wheel combination that may work for your Snobird trailer. If you have zero offset on the tires you have, the section width of a 4.80/4.00-8 tire is 4.7 inches. I recommend the Kenda Bias Trailer Tire With 8 Inch Wheel, part # AM3H200. This combo has a 4 on 4 wheel bolt pattern and the section width of the tire is 6.6 inches. With zero offset, that would add about .95 inches width to the inside and also to the outside. Zero offset means the rim of the wheel is directly...
  view full answer...
• Replacement Tire and Wheel Needed for a 16x6.50-8 Size Tire
  Your current tire should have a diameter of 16" with a section width of 6-1/2". The tire size and wheel with a 4 on 4" bolt pattern that we have is the Kenda 165/65-8 Bias Trailer Tire with 8" White Wheel # AM3H200. The diameter of this tire is 16-1/2" while the section width is slightly over 6-1/2" (6.6"). It has a load range of C (800 lbs at 70 psi) and a max speed rating of 65 mph. You can verify that you have a 4 on 4" bolt pattern by measuring from the center of one bolt hole to...
  view full answer...
  
• Trailer Tire Size Close to 4.80-8 Tire Overall Diameter
  The special trailer tire size 4.80-8 does have an overall diameter of right around 16-inches when the tire is mounted on the rim and inflated. The other popular trailer tire size that has about the same overall diameter is the 165/65-8 size, which is about 16-1/2-inches overall diameter. This metric tire size is also known as 16.5 x 6.5 - 8 and it is wider than the 4.80-8. You can refer to the linked article on special trailer tires which indicates the overall diameter of the most popular...
  view full answer...
• Recommended Trailer Tire That is Over 5 Inches Wide and Under 17 Inches Diameter
  I have the perfect wheel and tire combo for you. For this you are going to want to use a 165/65-8 tire. A 165/65-8 tire is going to be 1.4" wider and .4" taller than a 4.80/4.00-8 tire. The total dimensions of a 165/65-8 tire are 5.4" wide x 16.5" diameter. I recommend using the Kenda 165/65-8 Bias Trailer Tire with 8" White Wheel part # AM3H200 which as the title states, has a 165/65-8 tire on a 8" diameter wheel. This wheel has a 4 on 4" bolt pattern that is compatible with 1/2"-20...
  view full answer...
• Will an ST165/65-8 Trailer Tire Fit In Place of a 4.80-8 Trailer Tire
  The measurement you are seeking is the backspacing. On just the wheel included with tire and wheel combo # AM3H200, would be approximately 3-1/4 inches measured from the mounting surface of the wheel to outside of the wheel (inboard or outboard since the wheel has a zero offset). The width of the tire though will be 6.6 inches. This is 2 inches wider than the 4.80-8 tires and wheels. The larger size will be 1 inch closer to the trailer frame. But it will only be 0.2 inches closer to the fender.
  view full answer...
• Comparing Trailer Tire Sizes 16.5x6.5-8 and 165/65-8
  You are absolutely correct that the two different tire sizes, 16.5x6.5-8 and 165/65-8, are in fact the same size, the latter being the modern metric designation. The part you referenced, Kenda # AM3H200, is a 165/65-8 bias-ply tire/wheel with a 4-on-4-inch bolt pattern in Load Range C. The link provided at right will show you all available bias-ply tires and pre-mounted tire/wheel combinations. Simply click on the filters in the left-hand margin to narrow the results to what you need. I...
  view full answer...
• Availability of Wheel and Tire Size 16x6.50-8 on 4 on 4 inch Rim
  We have just what you need. The part # AM3H200 has the tire size you need of 16x6.50-8 and is mounted to a rim with a 4 on 4 inch bolt pattern.
  view full answer...
• Can Size 4.80/4.00-8 Tires on Trailer Be Safely Replaced With 165/65-8 Tires
  The Kenda # AM3H200, like the majority of trailer tires is rated for a maximum speed of 65 mph. The 165/65-8 tire size is 16.5 inches in diameter and 6.6 inches wide, while your original 4.80/4.00-8 tires are close in diameter at 16.1 inches but are a good deal narrower at 4.7 inches wide. Since the 165/65-8 tires would extend 1 inch closer toward the trailer frame on the inside, they'll work if you have enough clearance to the inside of the tire. The # AM3H200 165/65-8 tire would also...
  view full answer...
• Speed Rating of Kenda 165/65-8 Bias Trailer Tire with 8 Inch White Wheel
  The tire on the Kenda 165/65-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C # AM3H200 has a speed rating of 65 mph. This wheel and tire combo has a maximum capacity of 800 lbs (per wheel/tire) and fits a 4 on 4" bolt pattern. I have added a link to a video review for you to check out as well.
  view full answer...
• Using 165/65-8 and 215/60-8 Trailer Tires on a Go Cart
  Since you will be so far below weight capacity, by all means inflate the tires for comfort rather than weight capacity. You'll want to keep in mind that these are bias ply tires, which will typically have a stiffer sidewall so you might not get all the flex you're looking for. This being said, don't forget these tires are designed for use on a trailer, and have not been tested for the purpose you propose. Both wheels have a 4 on 4 bolt pattern, so you'll want to be sure your hubs have a...
  view full answer...
• Available 4-Bolt Wheel/165/65-8 Tire to Replace Lawn Mower 16X6.50X 8 Tire
  Your 6-1/2-inch wide mower tires are a 165mm width in metric terms and in a wheel/tire of this size with the 4-bolt lug pattern we offer Kenda # AM3H200 which is size 165/65-8. This is our only pre-mounted wheel tire with this tire size. This is NOT a foam-filled tire; it is a standard pneumatic type rated for 700-lbs at its rated pressure of 70-psi.
  view full answer...
• Replacement Wheel and Tire Recommendation for 16X6.50-8 Tire Size on Utility Trailer
  We have just what you need. The part # AM3H200 has the tire size you need of 16x6.50-8 and is mounted to a rim with a 4 on 4 inch bolt pattern. If instead you need a 5 on 4-1/2 inch bolt pattern you would want the part # AM3H240.
  view full answer...
• New Versus Old Tire Sizes 8 Inch Wheel
  You're speaking of two different tire sizes. 18.5x8.5-8 is the old tire size for today's modern equivalent 215/60-8 size. The 16.5x6.5-8 is the old size, today's equivalent would be 165-65-8. The # AM3H200 is a 165/65-8 (old size 16.5x6.5-8) and the # AM3H290 is size 215/60-8 which used to go by 18.5x8.5-8. I hope that's cleared it up for you.
  view full answer...
• Availability of Kenda 165/65-8 Bias Trailer Tire Mounted on a Wheel with a 4 on 4 inch Bolt Pattern
  We have the exact thing you want except the wheel is painted white instead of galvanized steel. Check out the Kenda 165/65-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 # AM3H200. This has the same tire as the AM3H240 except it's on a white wheel with a 4 on 4 inch bolt pattern. We appreciate your loyalty!
  view full answer...
• Replacing A 16.5 x 6.5 - 8 Wheel/Tire With A 18.5 x 8.5 - 8 Wheel/Tire
  In order to account for the new tire and wheel size, you will want to take a few measurements. A 16.5 x 6.5 - 8 wheel is 5.3" wide with an overall height of 16.5". A 18.5 x 8.5 - 8 wheel is 7" wide with an overall height of 18.3". Therefore, the 18.5 x 8.5 - 8 setup will be 1.6" wider and 1.8" taller than the 16.5 x 6.5 - 8 setup. Please note that you will want to allow for 4.5" of clearance between the top of the tire and the bottom edge of the fender for proper suspension travel. If...
  view full answer...
• Replacement Wheel and Tire Recommendation for 16X6.50-8 Tire Size
  We have just what you need. The part # AM3H200 has the tire size you need of 16x6.50-8 and is mounted to a rim with a 4 on 4 inch bolt pattern. If instead you need a 5 on 4-1/2 inch bolt pattern you would want the part # AM3H240.
  view full answer...
• Replacement Wheel and Tire Recommendation for Tire Size 16x6.50-8
  We have just what you need. The part # AM3H200 has the tire size you need of 16x6.50-8 and is mounted to a rim with a 4 on 4 inch bolt pattern. If instead you need a 5 on 4-1/2 inch bolt pattern you would want the part # AM3H240.
  view full answer...
• Wider Replacement for a 4.80/4.00-8 Trailer Tire
  The best wider replacement option we have for a 4.80/4.00-8 trailer tire is a 165/65-8 trailer tire which is going to be pretty much the same overall diameter (16.1" vs. 16.5") so .4" larger but 2" wider (4.6" vs. 6.6"). If you have a 4 on 4" bolt pattern then I recommend the Kenda 165/65-8 Bias Trailer Tire with 8" White Wheel part # AM3H200 but if you have a 5 on 4-1/2" bolt pattern then I recommend the Kenda 165/65-8 Bias Trailer Tire with 8" White Wheel part # AM3H220.
  view full answer...
• What is the Offset for 8" Trailer Wheels with 4 on 4" Bolt Pattern
  It all kind of depends on what exact tire/wheel combo you're looking at, but generally speaking trailer wheels have a zero offset so the middle of the tire is basically directly over where you mount it to the hub. If you can tell me what exact combos you're looking at I can answer your question a little more directly. The 2 combos I saw that match your descriptions are # AM3H290 and # AM3H200 which both have a zero offset.
  view full answer...
• Trailer Tire that is Narrower than Size 18.5x8.5-8
  We have a narrower wheel and tire that is similar to what you have now with the size 16.5x6.5-8 which is the same as the modern size 165/65-8. For this mounted on a 4 lug wheel you'd want # AM3H200 or for a 5 lug # AM3H220. This would give you right at one more inch of clearance between the frame and the tire.
  view full answer...
• What Is the Backspacing on the Rim of the # AM3H200
  The Kenda 165/65-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C # AM3H200 uses the Americana # AM20011 wheel which has a zero offset. This will split the width in half, so once you account for the thickness of the mounting plate, you will have about 2-1/2 inches on either side of that mounting location for the wheel but when you include the tire it will be about 3.3 inches to either side. So the rim backspacing is 2-1/2 inches and the Tire backspacing is 3.3 inches.
  view full answer...
• What is the Smallest Overall Diameter Trailer Tire You Carry and What is the Speed Rating
  The special trailer (ST) tires will have a maximum speed rating of 65 miles per hour, unless stated otherwise on the tire. It is not recommended to run a trailer tire at a higher speed than 65 miles per hour due to the heat buildup that will occur inside the tire and cause the tire to break down and cause the tire to fail. The smallest 5 on 4-1/2 bolt pattern tire and wheel we sell is Kenda 4.80/4.00-8 Tire with 8 Inch Wheel, part # AM30020. It has an overall diameter of 16.1 inches. The...
  view full answer...
• Wider Tire Recommendation for Waverunner Beach Launches with a Loadrite Trailer and 2010 Toyota Rav4
  It may be possible to use a wider tire and wheel combination on your trailer to help with launching on a beach. You will need to determine if the overall width and height of the replacement assembly will work on your traielr and not rub the frame or fenders. The Kenda 165/65-8 Bias Trailer Tire with 8 inch White Wheel, item # AM3H200, may work for your application. this combination is 16-1/2 inches overall diameter and 6.6 inches wide. Measuring your trailer for clearance will tell you...
  view full answer...

Do you have a question about this Trailer Door Hinge?