Arrives before Christmas 
Great for cabinets, toolboxes, and panels in your enclosed trailer, this piano hinge provides uninterrupted support for your door. The hinge rotates 270 degrees and contains no pre-drilled holes, so it can be welded or drilled to match your setup.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this 72 inch long by 1 1/16 inch wide steel piano hinge. Now, this hinge will provide us sturdy, continuous support along the length of your cabinet, your door, or your panel. It is great for oversized doors, trailer doors, entrance doors. It'll provide more support than multiple small hinges.
It is a nice continuous design, so it will reduce stress on the hinge with use with heavier doors. Want to zoom in to show you up close. This will rotate 270 degrees for full opening and closing motion. You can see right now if we rotate it back, goes about 90 degrees back. And then if we go the other way, it'll go a full 180 degrees.
So again, you get a full 270 degree rotation. Now, this is a durable steel construction. Has a nice unplated mill finish on it. It is a weld-on or bolt-on installation. Now, to bolt it on, it will require drilling holes into the hinge.
And this hinge can be cut to your specific size for your application. This part is made in the USA. And we're gonna just give you the overall length. Take the tape measure, we'll go from one end, all the way to the other end is right at 72 inches or six feet total length. The open width, which is the position it's in right now, so the open width is gonna measure right at 1 1/16 of an inch.
The knuckle length, now, each one of these little sections is called a knuckle, so the length on one of those knuckles is right at a half an inch. And the pin diameter, in other words, the long pin that goes through those knuckles to hold the two pieces together, the diameter on that pin is gonna be 3/32 of an inch. But that should do it for the review on this 72 inch long by 1 1/16 inch wide steel piano hinge..
Average Customer Rating: 4.8 out of 5 stars (435 Customer Reviews)
Great for cabinets, toolboxes, and panels in your enclosed trailer, this piano hinge provides uninterrupted support for your door. The hinge rotates 270 degrees and contains no pre-drilled holes, so it can be welded or drilled to match your setup.Shipping tube showed up empty. The shipping tube was sealed with only packing tape which didn't stand a chance at holding this heavy hinge inside the tube. It should have had plastic plugs plus tape or something more substantial to hold the hinge inside.
I didn't use these for a trailer but I bought these to cut down and make hinges for armored vehicle doors and hinged windows. Very heavy duty and priced well. Difficult to find hinges, happy they were available through here.
Very impressed with the quality this hinge. I had to repair my FlipBak tonneau cover. This hinge will provide superior security over the original piece of rubber that those tonneau covers use as a hinge.
Thanks for the excellent customer service.
Work great. More sturdy than piano hinges on concession trailer.
delivered super fast,
This starts with an order on 5-7-24. The part was out of stock but did come in and was shipped on 5-29-24. Odd thing was the tracking # supplied only showed creation of a label. When it finally arrived, shipping tube bent, there was no part inside, nothing. I contacted etrailer and they sent another one out. Same thing happened with the tracking showing label only. Two weeks went by and still no part. I contacted etrailer again and was told that the USPS facility was having troubles and manually attempting to track packages. etrailer next contacted me and said they were going to use a different carrier and shipped it out on 6-21 through UPS. It arrived 6-22-24, shipping tube bent, but part had negligible damage and will work for my project. etrailer went to the extreme for this and I appreciate it.
It was my fault for ordering this in the first place. I thought that the original extruded rubber hinge was not available. Now I have this hinge but have no possible use for it
Worked great, just what I meeded
I am using this as a vertical door hinge for my shed. It is working perfectly. The heavy shed door no longer sags. The hinge operates smoothly. It was probably overkill but I don't like having to fix things more than once.
used cobalt drill bit drilled 4 holes in hinge on corners with paper to keep door space for future paint ,drilled holes in hinge only just touch wood ,undid 4 screws ,recessed wood with bur thing ,punched stainless hinge into wood, screwed in screws near flush ,very clean super price and strong ,thank you
This is the item I needed and it was sent out and received very fast, very pleased with the product here for my enclosed race trailer to help with my need after I had upgraded my trailer floors & ATP ramp door flap. Item was just as described in the video upon ordering off the website.
Thanks
It arrived on time perfectly protected with no damage. This was a last minute project that was dropped on me and I was scrambling to to find the components. etrailer was easy to scroll through and easy to complete my purchase.
Nice heavy duty hinge. We used them as a replacement for the rusted light duty hinge on our custom hunting camp trailer. Received them quickly and in time to installed before the 2022 deer season.
Shouldn’t use USPS to deliver your products. I waited four days after the expected delivery date and finally went to the post office. Woman said “yeah he wouldn’t have ever delivered it, it’s too long for his little postal Jeep.
Good Product I Received on a timely fashion. I spoke to customer service after a shipping issue and received plenty of help and support from an employee Amy. I use this product as a weld on hinge for custom Aluminum toolboxes I produce.
The hinge was perfect and was exactly what I needed. The customer service was second to none! They upgraded my regular ground shipping to 3 to 5 day at no additional charge. I wish the other companies I do business with had the customer service like etrailer.com does.
Very well constructed as we needed a heavy duty weld on hinge and this was the only hinge in the market to meet our application.
Fast service great feedback and properly packed for safe delivery as we live in an industry where what arrives and in what condition is always an unknown.
I highly recommend this vendor. I will be purchasing more products from their large selection.
2 thumbs up!!
Hinge was installed as a hinge for a playground gate. Has worked well!!! Has beat all the other hinges that were tried. As the Kids slam the gate and play on it.
Thanks George
3 stars, due to packaging. Ordered 3 inch by 72 inch piano hinge. Packaging tube arrived without hinge, cap on end was missing.Went to post office to see if they seen it and they did. Brought it home and is in working condition.
Worked out great for my trailer build and made thing a lot easier for making a heavy duty tool box door in the v of a tag trailer
Just what I was looking for!
I plan to hinge my shop stairs,pictured in the attached photo.
I tried ordering this same hinge through a hardware supplier and they couldn't get it. I found this on a web search and couldn't believe E-trailer had it in stock, it came within two days. Happy to get this project done!
Hinge is working great and fitted my needs perfectly. I would purchase it again if needed.
Good hinge. Fast shipping
Highly recommend. This is a very heavy duty hinge.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.